Hydraulic Pumps Unit

REXROTH

Condition: used, Linear unit, linear axis, gantry axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripper REXROTH INDRAMAT Type: MKD0771B-061-KP1-KN Ident No. 247238 0001 Year of manufacture: 2000 Axis movement: 2400 mm Carriage length: approx. 500 mm Total length: 3520 mm - Pneumatic feed gripper (clamping gripper with 2 Festo compressed air cylinders) - Standard linear guide 65 x 25 mm - Steel base profile - Ball screw Ø 32 x 10 mm - pneumatic with position indicator - Permanent servo motor type: MKD071B-061-KP1-KN (Part no.: 261989, p. no. MKD071-50234, brake with 24 V DC) Overall dimensions L x W x H: 3520 x 400 x 580 mm Weight: 340 kg good condition Kljdegi E Haspfx Afajn possible drive controllers under stock no. 53628 and stock no. 53673

Year of construction: 2008, condition: ready for operation (used), Loading chamber dimensions: 280x580mm, loading height: 700mm, max. load: 300kg, with protective housing and documentation, machine was functional until the end, complete maintenance would have to be carried out on the machine, inspection is possible. Ksdpfsqgfbgex Afajln

Condition: used, Electro Dual Screwdriving Unit with Automatic Feed and Pneumatic Double Stroke BÖLLHOFF Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriving unit is equipped with a pneumatic double stroke, operated via Festo valves and cylinders. Additionally, various monitoring systems are installed for full automation. Technical data: Torque of electric screwdriver: 0.6 Nm Gearbox torque: max. 10 Nm Speed: max. 20,000 rpm Rated voltage: 3~ 0-230 VAC Current consumption: max. 7 A (per screwdriver) Pneumatic long-stroke cylinder: 80 mm Pneumatic short-stroke cylinder: 20 mm Total pneumatic stroke: 100 mm Spring stroke for screwdriver: 20 mm Distance between both screwdriving tools: 73 mm - Equipped with a TORX bit T27 or TP27 (presumably for M6 screws) - Requires Bosch Rexroth LT303 power module for operation (power module not included) Ksdpfx Afehxvu Ejajln Screwdrivers 1 and 2 are each composed of the following components: Rexroth type servo motor Rexroth type 0 planetary gearbox Rexroth type 0 encoder Rexroth type 0 straight drive output Component details: Electric screwdriver unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Rated voltage: 3~ 0-230 VAC Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material no.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material no.: 0 Nominal torque: 12 Nm Reduction ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive output Rexroth Type: 2GA82 SZ2 1/4" SQ Material no.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction ratio: 1 Weight: 0.2 kg Installation length: 90 mm One 7 m motor connection cable is included in the delivery. Overall dimensions W x H x D: approx. 180 x 920 x 300 mm Total weight: approx. 20 kg Good condition

Condition: used, Electric dual screwdriver unit with automatic feed and pneumatic double stroke, mounted on handling device, handling system, manipulator for screwdriving technology. Screwdriving Unit: BÖLLHOFF / BOSCH REXROTH Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriver unit features a pneumatic double stroke via Festo valves and cylinders. Various monitoring systems are installed to enable full automation. Screwdriver 1 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 straight drive head Screwdriver 2 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 offset drive head Dimensions (WxHxD): 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring travel: 20 mm Last screws used: M6 x 15 mm Electric screwdriver unit Rexroth Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current draw: max. 7 A Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Kodpfx Aofx Hyfofaoln Material No.: 0 Efficiency: 90% Reduction ratio: i=18.9 Max. torque: 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Nominal torque: 12 Nm Reduction: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive head Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.2 kg Installation length: 90 mm Offset drive head Rexroth Type: 2VNA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Load capacity: max. 14 kg Handyflex reach: 250 to 650 mm Handyflex reach (swung out): max. 860 mm Swivel radius at full extension: max. 360° Guide column vertical: Ø 30 mm Guide columns horizontal: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for limiting swivel radius Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition Without the blue steel pallet as base plate Blue steel base plate is not included in the scope of delivery.

Condition: refurbished (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 1276, CNC Hot Radial Forging GFM SX-13 New in 1974 / 2022 New control system PLC SIEMENS S7 Machine number: 1276 No. of Hammers: 4 Forging force each hummer: 160 Ton Hammer stroke / min: 700/min Hammer lenght: 240 mm Diameter setting range: 80 mm Maximum forging diameter: Structural steel, round-cross section: Ø 130 mm square cross section: Ø 115 mm Smallest dimensions forged: Ø 25 mm Manipulator A max. displacement: 6820 mm Manipulator B max. displacement: 7150 mm Maximum workpiece length: 6000 mm Rapid speed manipulator: 400mm/sec Total connected power: 300 kW 380 V, 50 Hz Machine dimensions: Forging height over floor: 615 mm Total height pf the machinr over floor: 1665 mm Total machine lenght: 32670 mm Total foundation lenght: 33400 mm Tot. machine width (without auxliary equipments): approx 3885 mm Kodpfx Aoq U R T Nofaoln Total foundation width: 16000 mm Total weight of the machine: 84.000 Kg

Condition: used, Programming console, operator panel, robot teach pendant Robot teach pendant, teach box, handheld command station, handheld panel BOSCH REXROTH Type: IndraControl VEH30.1 The VEH 30.1 is suitable for: 1. Operating and visualizing IndraLogic, IndraMotion MLC, IndraMotion MTX. 2. Setting up machines and systems. 3. Operating and diagnosing extended handling systems. 4. Visualizing simple operator panels on assembly lines. Type No.: VEH30.1BJN-128ET-G3D-128-BS-NN-FW Material No.: R911170692-104-08W34-I-B-H-T Serial number Year of manufacture: 2008 Firmware: FWA-VEH*01-CWN-01V07-EN R911310833-103 Year of manufacture: 2008 Operating system: Windows CE 4.2 Interface: 1x Ethernet (RJ 45) Nominal voltage: 24 VDC Nominal current: 0.7 A Power consumption: max. 14 W Display: 8.4" Touch TFT, 800 x 600 pixels Operation: Touch and keypad operation with 34 keys Protection class: IP65 - Connection cable approx. 8 m - 19-pin connection plug - Three-stage enabling switch - Flexible use thanks to hot-plug capability Weight: 3 kg Fully functional, tested Klodpfjd Ab D Ssx Afaon In good condition

Condition: used, Hydraulic power unit with hydraulic pump BOSCH REXROTH / HYDRONORMA Hydraulic power unit year of construction approx. 1985 Ksdpfx Aegprpgsfaeln operating pressure: max. 65 bar volume flow: 20 litres/min. tank capacity: 110 litres Engine power: 3 kW Engine speed: 1440 rpm. Mains connection: 400 Volt, 50 Hz - 1 piece hydraulic vane pump MANNESMANN REXROTH, type 1PV2V3-40/25RA01MC63A1 - 1 piece drive motor KATT, type FFN 100L - 1 piece pressure reducing valve BOSCH REXROTH, type DR 8 G433/100 YM - 1 piece return filter - 1 piece 4/2-way manual valve (e.g. for extending and retracting a double-acting hydraulic cylinder) - Hydraulic tank with maintenance cover and oil level sight glass Space requirement L x W x H 900 x 550 x 1150 own weight: 142 kg good condition

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. Kedpjpugwiefx Afasln The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: like new (used), 5 units available All are new and unused Klsdpfx Afoylkykjaon Price applies per unit

Condition: used, functionality: unexamined, Ferwood Code: RU0004074 - Manufacturer Code: MKD071B-061-KP1-KN - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer a refurbishment service. Please contact us. 8KG 46X39X27 Klodpfjyla Hmex Afaon

Year of construction: 2000, condition: excellent (used), SMS MEER CNC DOUBLE SIDED CHAMFERING MACHINE Manufacturer: SMS MEER Type: RFA 14 Yom: 2000 Working range: tube Ø 21,3 – 114,3 mm Ksdjghrguepfx Afaeln Wall thickness 2,3 - 11 mm Length: 6-12m Composed of two RFA14 chamfering machines with transport devices between the machines. The task of machines is to chamfer inside and outside both ends of the tubes. The range of diameters of chamfered tubes 21.3-114,3mm and wall thickness of 2.3-11mm in the length range of 6-12m. The task of transport in the area of the chamfering machines is to collect the tubes from the roller table and move them between the chamfering machines.

Condition: like new (used), Year of construction: 2021, Transport Vehicle / Autonomous Mobile Robot (AMR), ActiveShuttle 2.0, Bosch Rexroth – Used - : Ex works price: €25,000 (net)! Autonomous Mobile Robot (AMR) for automating intralogistics, capable of transporting dolly carts with a payload of up to 260 kg. Features include 3D obstacle detection, laser navigation without the need for infrastructure modifications, and an integrated touchscreen display for operation. The system is VDA 5050-compliant. Manufacturer: Bosch Rexroth Model: ActiveShuttle 2.0 Year of manufacture: 2021 7211000002280 / 3842560131 Includes: - 1x Charging station - 1x Manual control device Transported goods: Dolly carts (600 x 400 mm), max. 1200 x 600 mm Transport weight: max. 260 kg Travel speed: max. 1 m/s Localization (SLAM) & navigation: laser scanner, odometry Safety laser scanner: Type 3, SIL2, Performance Level d ESD (Electrostatic Discharge) Li-Ion Battery (48 V, 17 Ah) Data transfer: WLAN IEEE 802.11 Condition: Very good, operating hours counter likely in the double-digit range, but the customer cannot give an exact value. Kjdpfx Afeyk T Easaoln Available: Immediately Location: D-32339 Espelkamp (Germany) Manufacturer's Description: ActiveShuttle automates and standardizes your internal material and goods flow. Transport your dolly carts loaded with small load carriers (SLC/KLT) with maximum flexibility and safety. From cyclical to demand-based material supply, ActiveShuttle enables a wide variety of transport concepts. Thanks to automatic loading and unloading, manual handling tasks are a thing of the past!

Condition: refurbished (used), overhauled Rexroth double pump for Krauss Maffei SGM machines. Service, repair and exchange of hydraulic pumps Rexroth, Voith, Bosch, Moog. Kledpfjyithlex Afaen

Year of construction: 1985, condition: used, Used HUGH SMITH 1000 Ton Hydraulic 4 Post Downstroking Press for sale Operating Speeds 50 mm/sec. Gravity approach. 6 mm/sec. Pressing. 50 mm/sec. Return. Kodpfx Aof A R Uzefasln Working Height 1060 mm. Press Weight 102 tons total. Towler Hydraulics. Machine originally upstroke (see original drawing attached) but converted to downstroke and refurbished in 1985 (see updated drawing attached) with new electrics. Brand new c, h and d frame hydraulic presses for sale – can quote at competitive prices and built to your specification. New 1000ton hydraulic presses available for sale upon request

Condition: excellent (used), Rexroth Valve 4WRKE27W3-500L3X/6EG24 MNR: R900972662 Klsdpfsyitg Ijx Afaon MNR: R900619277 for Krauss Maffei The photos are sample images. Valve may differ from the photos.