Inverter lathe

Rogi WF290V-F

Condition: good (used), Year of construction: 2008, turning length: 2,000 mm, feed rate X-axis: 3,000 m/min, feed rate Z-axis: 3,000 m/min, HeidenHain ND780 3 Axis dro Variomatic RPM speedrange  Steady rest Multi fix Tool system DBC Turning Length: 2000mm Swing over bed Ø: 830mm Swing over cross slide Ø:420mm Swing in the gap Ø: 1000mm Gap length: 295mm Spindle bore: 110mm Bed width: 560mm Tailstock spindle Ø: 105Ø Stroke pinole: 225mm Spindle taper: 6Mk Power: 15kW Speeds / ranges: 2000Rpm Feed rate X-Axis: 3000mm/min. Gsdpfx Adoxf Ey Re Ustw Feed rate Z-Axis: 3000mm/min. Workpiece load: 2400 Length: 3700mm Width: 1900mm Height: 1900mm Weight: 5500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, TC 165 x 750V Illustration shows MIOTAL® TC 180 x 1000 Center distance: 750 mm Center height: 165 mm Swing diameter over bed: Ø 330 mm Bed width: 190 mm Cross slide travel: 160 mm Top slide travel: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm Max. Chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 1/min Mechanical feed stages: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Face feeds X: (40) 0.022 - 0.98 mm/rev Metric thread: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 Gg/inch Thread module: (32) 0.4 - 7.0 Diametral thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner taper of quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 650 kg Features: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with recirculating oil lubrication, precision bearing-mounted spindle, hardened and ground gears for long-lasting quality - Electromagnetic spindle brake (TC), frequency converter with electric braking device (V models) - Torsion-resistant machine beds made of MEEHANITE quality casting, stress-free annealed and multi-ribbed for extremely smooth running - Electrical equipment from SIEMENS/SCHNEIDER - Overload protection for feed gearbox - Pulse button for main spindle - CE / IEC as well as German documentation and German service Gtjdpfxsir Igwe Ad Uew Basic equipment (standard accessories): - Machine stand with splash guard rear panel - 3-jaw lathe chuck - 4-fold steel holder - Foot pedal with mech. brake device - Coolant device - Chuck guard and spindle cover in accordance with European safety standards CE - 1 Fixed center point for main spindle - 1 Fixed center point MK3 - 1 Test report - Safety devices and electrical equipment according to CE - Reducing sleeve for main spindle Operating tool Available options for this lathe: - 3-axis digital readout - Quick-change holder system Multifix also available as a gearbox version

Condition: good (used), Year of construction: 1988, Weiler lathe Type Condor B 2-axis digital readout Center height 165 mm Center distance 750 mm Rotation over bed 330 mm Gtsdpfsvgmbvsx Ad Uow Rotation over cross slide 185 mm Spindle bore 40 mm Connected load 3 kw Speed 22-2800 rpm Tailstock MK 3 Coolant pump (not connected) work light Automatic longitudinal and planar feed spindle brake - Folding jaw chuck guard - splash guard Weight approx. 1040 kg 3 jaw lathe chuck Multifix B Rotating center point

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : HSK40 - Spindle speeds : 12.000 [rpm] - Spindle power : 7,6 [kVA] LINEAR AXES - Travels on X/Y/Z axes : 500 / 410 / 610 [mm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 26 - Tool exchange time : 0.7 [sec] TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 200 [kg] POWER SUPPLY - Supply voltage : 220 [V] - Total installed power : 25 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1.640 x 2.100 [mm] - Machine height : 2.274 [mm] - Machine weight : 2.250 [kg] MACHINE HOURS - Number of working hours : 9070 [h] EQUIPMENT - CNC : BROTHER A00 - Electronic handwheel - Interface : RS232 - Workpiece probe : Renishaw OMP 60 - 4th axis : LEHMANN sans variateur - Chips conveyor - Coolant tank - Coolant through spindle : 70 [bars] Gjdpsuhbt Rofx Ad Uetw - Oil mist extractor : AAF Astrosta - Electric transformer - Tool-holders : 42

Condition: new, Year of construction: 2025, For current prices and delivery times, please contact us. Dimensions and weights: Length (product): approx.3265mm Width/depth (product): approx.1065mm Height (product): approx.1550mm Weight (net): approx.1965kg Working ranges: Center height: 230mm Center width: 2060mm Circumferential diameter over machine bed: 460mm Circumferential diameter in the bed bridge: 690mm Swing diameter over cross slide: 270mm Turning length in the bed bridge: 240mm Bed width: 300mm Speed range: Number of speed ranges: 12 Speed range: 25 - 2000min¯¹ Electrical data: Power drive motor5.5kW Supply voltage400V Mains frequency50Hz Cooling lubricant system Cooling lubricant system Coolant pump output: 125W Spindle: Spindle holder: Camlock DIN ISO 702-2 No. 6 Spindle bore/bar passage diameter: 58mm Steel holder max. mounting height: 25mm Godjq Ukbpspfx Ad Uotw Spindle cone: MK 6 Tailstock: Tailstock holder: MK 4 Tailstock quill stroke: 130mm Tailstock quill diameter: 60mm Pitch: Pitch metric:0.1 - 14mm/rev Number of leads metric: 41 Pitch inch: 112 - 2Gg/1" Number of pitches inch:41 Pitch Diametral Pitch: 4 - 112DPI Number of pitches Diametral Pitch: 50 Module thread pitch: 0.1 - 7mm/rev Number of module thread pitches:34 Travel distance: Top slide travel: 125mm Travel of face slide: 285mm Bed slide travel: 1805mm Feed rate: Feed range longitudinal: 0.031 - 1.7mm/rev Number of longitudinal feeds: 42 Feed range flat: 0.014 - 0.784mm/rev Number of feeds flat: 42 Electrical connection: Total connected load: 5.8kW

Condition: excellent (used), Knuth UFM 2 universal milling machine Technical data X-axis travel (manual) 800 mm X-axis traverse path 750 mm Traverse path Y-axis 300 mm travel Z-axis 400 mm table size 1320x320 mm T-slots 5x14x63 mm Feeds Y-axis travel (8) 20 - 360 mm/min Z-axis travel 600 mm/min Spindle speed (12) 58 - 1800 min-1 Vertical spindle taper SK 40 Distance between spindle tip and table 0 - 400 mm Head rotation 45 Cone of horizontal spindle SK 50 Drive Godpfsnfu Rijx Ad Ustw Main motor power 4 kW motor power in Z axis 0,75 kW feed motor power 0,55 kW cooling pump motor power 0,09 kW Coolant pump capacity 25 l/min Dimensions and weight dimensions 1900x1720x1750 mm weight 2100 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: new, WMD45 - ROGI Drill Cutter Drilling capacity ----- 45 mm Gtodpfx Ajga T Ansd Uow Spot milling capacity ----- 80 mm Finger milling capacity ----- 32 mm Dimensions of the work table ----- 800 x 240 mm Dimensions of the T-slots ----- 14 mm Spindle mounting ----- ISO30 Maximum distance spindle - table ----- 460 mm Spindle stroke ----- 120 mm Head tilt ----- Left / Right 90 Degrees Longitudinal displacement of the work table ----- 560 mm Transverse displacement of the worktable ----- 230 mm Speed range 75 - 3200 rpm Weight ----- 350 KG Motor ----- 1.1 KW Voltage ----- 400V-3F INCLUDED * Drill head with pin ISO30 - B16 * Left / Right switch * Spindle protection * Fine adjustment * 2 Speed motor * Driven wedge * Tap function * Digital depth stop * CE plug OPTIONS * Base cabinet * Router clamp * ISO30 router bit holder + 12 collets in case * Router set

Condition: used, functionality: not functional, Year of construction: 1971, The abbreviation LARC stands for Lighter Amphibious Resupply Cargo. This refers to the tailgate of the vehicles, which enabled the military to transport a truck or other military equipment. The XV in LARC denotes the maximum payload: 15 tons. The vehicles are made of aluminum and have the following (precise) dimensions: 13.71 m in length, 4.41 m in width, and 4.70 m in height. (American measurements: 45 ft x 15 ft x 14 ft). The original LARC vehicles were equipped with two Cummins 8-cylinder diesel engines, each delivering 300 HP. On land, the vehicles could reach a maximum speed of 48 km/h and, on water, 9.5 knots, which is approximately 18 km/h. The unladen weight of the vehicle is 22 tons. The maximum permissible weight was 35.5 tons. Gtodpfjxcgy Hsx Ad Ujw The previous owner intended to convert the boats to fully electric drive in order to subsequently organize tours on the Wadden Sea. Around €200,000 was invested, but the project was not completed. The diesel engines have been removed and are no longer available. Battery packs are present and partially installed. The exact remaining work required is not known.

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 3595, Ladies and Gentlemen, We are selling a Weiler Commodor B lathe built in 2001 with Heidenhain 3-axis digital readout. The machine has been extensively overhauled in our workshop. Among other things, the main spindle bearing and the lead/traction spindle bearing were completely renewed! Technically, geometrically and visually, the machine is in excellent condition, which you are welcome to see for yourself on site. Availability: on request Machine no. 3595 Year of construction: 2001 Center height: 180mm Center width: 1000mm spindle passage: Ø 56mm max. spindle speed: 2000 rpm Tailstock taper mount: MK4 Godpfxsthd Shj Ad Uetw Feed range: 0.026 - 0.888 mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Connected load: 4kW Dimensions: approx. 2.2x1.5x1m (LxHxW) Weight: approx. 1.8t Further equipment and accessories: 3-axis digital display, coolant device, chuck guard, pull-out chip tray, 3-jaw chuck Röhm, 4-jaw chuck Röhm, various clamping jaws... Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice E00f3g2rl - On request, you can also order additional accessories such as tools etc. directly - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: good (used), Year of construction: 1979, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine -Manufacturer: Zimmermann, universal milling machine type FZ 1 with extensive accessories -rotating cross table: 490 x 400 mm Gtjdpfxsnzpx Rs Ad Usw -Travel: X/Y/Z 320/385/430 mm -Spindle holder: SK30 -Drive: 1.1 kW -Speed: 560 to 14000 rpm, 8-stage -Accessories: incl. see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg