End Milling Machine

Rotox SAF 365

Condition: excellent (used), Year of construction: 2016, operating hours: 1,395 h, functionality: fully functional, machine/vehicle number: 1400040877,  4-axis (X, Y, Z, A) center,  For economical and efficient machining of aluminum profiles and thin-walled steel profiles,  Version with air-cooled milling spindle,  All machining processes such as milling, drilling and threading take place on a stationary profile,  Smooth machining using all tools,  Simultaneous tool magazine ensures short tool change times and, as a result, optimal machining cycles,  Magazine can be equipped with eight tools,  Windows operating system  Machine equipped with eluCam program  Max. length of machining fields with front machining: 4200 mm  Max. length of machining fields without front machining: 4320 mm  Automatic length measurement on both sides,  Barcode reader,  Stationary tool magazine (8 slots), Pgedpfx Abeuc U S Ns Iow

Year of construction: 2001, condition: used, Pictures to follow - machine is being overhauled Technical data: - X-axis travel: 7300mm - Y-axis travel: 1000mm - Z-axis travel: 650mm - Swivel angle A-axis: 0-90° freely programmable - Swivel angle C-axis: 0-355° freely programmable - Max. Machining length without end face machining: 7300mm - Max. Machining length with end face machining: 6980mm - Tool changer with 10 places and a saw blade holder - 9 material clamps Podpst Ea Tfsfx Ab Iegw - SK30 tool holder - 2-layer machining

Year of construction: 2003, condition: used, 4-axis machining center with 8-way tool changer for aluminum or PVC profiles Max. machining length: 6,400 mm Y-axis travel: 850 mm Z-axis travel: 650 mm Swivel angle A-axis: 0° - 180° Max. Speed 21,000 rpm Windows operating system minimum quantity spraying Tensioner detection and automatic displacement Chip conveyor belt in the bed Steam extraction Pendulum operation through two light barrier areas Pgodpfx Abeuwq S Ds Ijw Loading is included in the price Weight: approx. 4,500 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 1500050209, bar length: 12,000 mm, Bar machining center was purchased in 2022 as part of a partial business acquisition. For this purchase, an appraisal was prepared by the original owner. (Appraisal attached) Psdpfx Aoxlq Rbeb Iegw The machine has hardly been used over the past three years as we have two other machining centers. Bar machining center ex works (can be dismantled and collected at any time)

Condition: new, Year of construction: 2025, Fully automatic cutting of small-medium aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of aluminium profile lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and aluminium feeding rates for maximum process productivity. • Automatic optimiser mode with aluminium laser length measure and optimisation for minimum waste (optional). Pgodpfxof Eh Hds Ab Ijw • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). Highly suitable for: • Windows and doors manufacture • Commercial office manufacture • Data centres manufacture • Linear lighting manufacture • Blinds and shades manufacture • Composites manufacture Model: A420 Length: 6 m Material Length: 4680 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: used, Year of construction: 1993, Used Emmegi double mitre saw for aluminium Pjdpfew Ddy Aex Ab Ijgw

Year of construction: 2004, condition: ready for operation (used), Main Drive Spindle speed range 34000 Spindle motor power 15 kW Number of axis 5 Movement X-Axis Movement 9500 mm X-Axis Rapid Traverse 70 m/min Y-Axis Movement 1000 mm Y-Axis Rapid Traverse 40 m/min Z-Axis Movement 630 mm Z-Axis Rapid Traverse 40 m/min Tools Type of tool holder HSK-63F Media Chip conveyor Yes Additional Equipment 2-zone pendulum operation Angle milling head for bottom-side machining (optional) Automatic length measurement Barcode scanner Label printer Psdjwtiw Espfx Ab Iogw Cycle time monitoring Tool holders, collets, saw blades, tools included eluCad (office software package for production optimization) This 5-axis Elumatec SBZ 150 was manufactured in 2004. It features a CNC profile machining center with a maximum machining length of 9,220 mm and a spindle speed of 34,000 rpm. The machine includes a tool magazine with standard and special tools, and supports 6-sided machining with optional angle head. It's dismantled and ready for delivery. If you are looking to get high-quality milling capabilities consider the Elumatec SBZ 150 machine we have for sale. Contact us for more information. Application Types Other Machine Tools

Year of construction: 2005, condition: excellent (used), functionality: fully functional, elumatec SBZ150 Profile Machining Centre 6.0 m 5-axis control. Efficient machining of aluminium and steel profiles Working length: 6,000 mm Description: Short tool change times; Automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter diameter 50 mm, angle head or special milling cutter diameter max. 100 mm); Six-sided machining; Underside machining with angle head (option); Rapid base positioning (up to 60 m/min) of the processing unit in the X-axis; Low-wear direct drive; With automatic clamp detection and positioning; Dual-circuit clamping system with two pneumatically retractable stops; Standard with automatic central lubrication system; Robust machine bed for a working length of 6,000 mm; Continuous support table; Clamping system with integrated six-row recirculating roller units and linear guides. 5-axis industrial PC control, with 3 axes for path control; High-dynamic three-phase servo drives with resolver and digital servo controller; Swivel angles of the A and C axes freely programmable; With color screen and disk drive; Memory capacity of over 200,000 sets; 3 serial and 1 parallel interface for online connection; Barcode scanner, label printer, etc. Integrated network card 10/100 MBit, RJ 45 port (network connection by customer’s IT administrator) Analog modem (customer must provide an analog telephone line) Technical data: Travel range X-axis: max. 6,240 mm Max. travel speed 60 m/min. Travel range Y-axis: 1,000 mm Max. travel speed 30 m/min Travel range Z-axis: 635 mm Max. travel speed 30 m/min. Swivel angle A-axis: 0-90° freely programmable Swivel angle C-axis: 0-355° freely programmable Further details on the milling range see drawing no. 150 05 17 08 Max. processing length for face machining left + right: 6,000 mm (with tool length 150 mm) Positioning accuracy: X-axis +/- 0.1 mm / 1 m length Y-axis +/- 0.1 mm Z-axis +/- 0.1 mm Milling spindle: Speed [rpm]: up to 100–22,000 Power [kW]: 15 Tool holder: HSK-F 63 Milling cutter diameter: 100 mm max. Saw blade diameter: 400 mm Tool length: max. 150 mm from nominal taper. Pgodpfxsw A Rv Is Ab Iow Included accessories: Automatic tool changer (without tool holders); Dual-circuit clamping system with 2 pneumatically retractable material stops; Automatic clamp detection and positioning; 8 horizontal pneumatic material clamping units; Tool presetting gauge Front light barrier Saw blade D400 with mount Angle milling head Important: The profile machining centre is fitted as standard with front light barriers. Any necessary side or rear guarding must be supplied on-site by the customer or please request an offer for safety fences from us. Incl. Angle milling head for underside machining

Year of construction: 2019, condition: excellent (used), functionality: fully functional, elumatec 4-axis profile machining center with 6,400 mm working length for flexible and efficient processing of aluminum and thin-walled steel profiles. Description: - Short tool change times thanks to a traveling tool changer - Fast positioning of the machining unit at up to 63 m/min due to dynamic servo drives - Modern 4-axis control for spatial machining operations - No axis referencing required thanks to the use of absolute encoder systems - Gentle on material surfaces thanks to processing on stationary profiles - Collision avoidance through automatic clamp detection and positioning - Certified, drive-integrated safety functions: - STO = Safe Torque Off - SS2 = Safe Stop 2 - SLS = Safely Limited Speed - Power-torque milling motor with closed-loop speed control for short acceleration and braking times of the spindle - Energy recovery via DC link coupling of the axis drives with regenerative feedback and buffering of the drive braking energy - Green-Line cooling unit with reduced energy consumption - Thread cutting without compensation chuck - Operator terminal with Windows operating system, large 15" flat screen - Connections: 2 x USB, network with RJ45 10/100 MBit - Easy and convenient programming via eluCam at the operator terminal, possible even during machining - Remote maintenance via TCP/IP with existing internet access - 2-circuit clamping system Technical Data: Travel and machining ranges: - X-axis [mm]: up to 6,760 / 6,400 - Y-axis [mm]: up to 845 / 645 - Z-axis [mm]: up to 620 / 250 - Swivel range A-axis: -90° 0° +90° Travel speeds: - X-/Y-/Z-axis [m/min]: 63/60/60 - A-axis [°/sec]: 144 Milling spindle: - Speed [rpm]: up to 24,000 - Power [kW]: 11 - Cooling: air - Tool holder: HSK-F 63 Tool changer system: - 8 tool positions - Tool length: max. 180mm (tool + holder) - Balance quality per DIN 1940: minimum G2.5 Machine equipment: - Automatic tool changer (without tool holders) - 8 horizontal pneumatic material clamping units - Cooling unit for control cabinet - 2-circuit clamping system - 2 pneumatic material stops - Uninterruptible power supply (UPS) for PC - Central lubrication - Minimum quantity lubrication for the tools - Hand-held control unit with potentiometer Pjdpswyvcbofx Ab Iogw - Central chip tray in the machine bed - 1 front safety light curtain system - Safety fence left and right - Depth gauge - incl. length measurement for profile bars - incl. various used tool holders and cutters

Condition: good (used), Flow warehouse rack Karton Flow Pgodpfxjiuidio Ab Isw Professional roller system: INTERROLL Five roller shelves with dimensions: 200 x 130 cm each included Can be configured for different widths of cartons. Dimensions of the entire rack: 230x135 cm, height 285 cm Five roller shelves with dimensions: 200 x 130 cm included Approx. 100 racks available Technical condition: used, in good technical condition