Cross-cutting line

Salvador SuperPush 200

Condition: ready for operation (used), Year of construction: 2025, This Optimizing Cross-Cut Saw was manufactured in 2025. It features a robust frame with a special inclined support surface for easier loading and squaring, and a high-precision pushing system. The cutting unit is equipped with a carbide-tipped circular saw and adjustable cutting speed. It includes a computer with CNC software for enhanced productivity and safety. Consider the opportunity to buy this Salvador Superpush 200. Contact us for more information about this machine. Additional equipment • Outfeed Table: Made of solid steel with a 30° incline. Length 3000 mm. • Safety Features: Rear protective cover, dual dust protection, and automatic lubrication. Machine Benefits Qualitative Machine Benefits • Cutting cross-section: max 240x150 / 300x110 mm, min 30x15 mm • Pusher slide dimensions: 300 x 345 x 25 mm • Feed speed: adjustable max feed speed set to 60 m/min • Pusher drive system: brushless dc servo drive motor with electronically controlled feed. Hnjdpfx Asyaikdebcji • Productivity enhancements: increases productivity and improves wood yield. • Reliability features: robust construction with thick, reinforced steel frame. • Processing accuracy: two electropneumatic aligners ensure square cuts. Technical Machine Benefits • Special inclined surface with a 30° angle, intelligent clamping, and automatic lift pusher during scanning. • Windows-based software with a 22" led color display and remote maintenance capability. • Electronic system: real-time communication with a modern computer-aided cnc. • Software: linux-based optimization algorithm with a windows 10 interface. • Pc features: intuitive s4u software, extensive customization, real-time updates, error detection, and remote maintenance software. • Saw motor power: 5. 5 kw • Saw blade type: carbide-tipped circular saw • Blade diameter: 500 mm • Number of teeth: z=108 • Board length before cutting: max 4100 mm, min 500 mm Extra Information Machine still under power. Please contact us for consultation and a custom-tailored offer.

Condition: used, Year of construction: 2021, functionality: fully functional, The BP 800 is an automatic bundle packer. Products up to 760 mm wide and 380 mm high can be packed. - Semi-automatic bundle packer - Pneumatic piston Hnjdpowth Dqofx Abcoi - Swiveling PLC display - Adjustable air flow in tunnel - Transport rods made of heat-resistant fiberglass - LD-PE film 25 – 80 µm - Low energy consumption - Complies with EU standards Technical specifications Power supply: 380 V Output per minute: 10 bundles Usable sealing bar: 760 mm Maximum product height: 380 mm Maximum film roll width: 750 mm flat film Compressed air: 6 bar Working height: 945 - 1105 mm Machine dimensions: 2665 x 1410 x 2105 mm Weight: 605 kg Download data sheet

Condition: good (used), Year of construction: 2012, I sell the automatic optimising end cutting saw Salvador Superpush 200, year 2012. Input table automatic feeding 5,10m (pusher system) Outut table 3,00m Total length: 9,00m Hjdoyi Suwjpfx Abconi Optimising with automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Condition: new, Year of construction: 2025, Push feed optimizing saw for the complete optimization of the wood and the elimination of the defects. COSTCUTTING OPTIMIZING SAW SuperPush 200 is a true technological evolution of traditional cutting methods. It is able to increase productivity considerably, reduce staff usage to a minimum, and improve wood yield. EXTREMELY ROBUST Very robust and reinforced steel structure. Special 30° inclined plane to favour the loading and keep the work piece squared. Pusher carriage dimensions mm. 300x345x25. Toothed belt width 50 mm. with 33 steel strips inside. Horizontal deposit/marking plane with width mm. 300. TECHNOLOGICALLY INNOVATIVE Electronic system composed by a computer connected in real time to a last generation numeric control. Software running on Windows. Complete with 5 qualities managing. 22” LED colour screen. Tele-service trough internet. + Macro Excel included. Hnjdpfefg U H Nex Abcji FAST Total optic system. Brushless servo driver motor for the pusher. Intelligent pressure beam. Adjustable cutting speed. RELIABLE AND SAFE Transmission system with sliding on double hardened and rectified guides. “Skf” sliding bearing with double anti-dust protection and automatic lubrication. Electric box separated from the machine and self-standing. Independent pneumatic regulations to adapt to different types of working. Safety closing protection on back side.

Condition: like new (used), Min. input length: 500 mm, max. 6 m. Hnjdjr A Et Topfx Abcsi Cross section: max. 140 X 250 Motor: 5.5 kW Sawing stroke servo swing arm Feed by means of rollers, 6 pieces top, 6 pieces bottom CNC control Maxi 8.0 1 X sorting unit per 11.5 m Machine is set up according to your wishes

Condition: new, Fully automated block cutting machine for pallet legs. Maximum length of raw material 6m. The machine suits all type of pallet production. OKKR-2006 can operate as a separate standing machine or as part of a production line. Hsdpfewdutmjx Abcsni How does it work? The machine is fed block material on the chain infeed conveyor. The material is fed automatically and the machine cuts the blocks into the preinstalled length. OKKR-2006 can be programmed to cut several different lengths of blocks from the original piece of raw material. Maximum length of the raw material is 6m. Asssembled block size: Min / max length: 600 mm - 6000 mm Width min / max: 75 mm - 150 mm Thickness min / max: 75 mm - 100 mm Specifications Operators | 0 Length | 7,5 m Width | 2,5 m Height | 1,8 m Power | 7 kW, 3x400 V+N Pneumatic system | 7 bar compressed dried air: 450 L/min Should be filled and controlled | Lubrication points Machine capacity | 36 blocks/min Standard equipment | 1 electric motor for saw blade 1 electric motor for material infeed 1 electric motor for chain infeed Mychrome has various additional machine modules that can be easily docked onto existing machines to achieve a higher level of automation. The ability to change the design and size of the pallets is still available with these additional machine modules.

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Hnsdpfx Abov Si Szscei Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 1996, condition: used, SECOND-HAND WIDE BELT SANDER COSTA MOD. 60 CC/2 1150 - CE RULES - working width 1150 - volt. 380/50 Hjdjimtblspfx Abcjni - S/N 951121/DR3 - year 1996

Condition: good (used), functionality: fully functional, double tenoner, double drill, step by step Equipped with: 1+1 saws Hnjdpfx Abjw A A E Ijcoi 1+1 milling group 1+1 drilling group Max length: 2500 mm

Condition: used, For sale - 3 kilns. Excellent technical condition; visual condition as per photos. Please see dimensions and specification for each kiln in attached pdf document. Kilns has been dismantled and standing in our warehouse. We can arrange an assembly of the kilns in the buyers location. For any further questions and inquirys, please feel free to contact us. Hnsdpfx Absw Apncjcji