Refrigerated/frozen transport

SCANIA P280 6X2*4 EEV CARRIER

Year of construction: 2026, condition: new, The fruit washer with a mill for fruits and vegetables is made entirely of stainless steel and is equipped with a sorting grate, a washing tank, and a conveyor belt. The fruits are immersed in water for a pre-wash. Afterwards, they are transported further via the conveyor belt, which thoroughly cleans the fruits with fresh water. After cleaning, the fruits enter the mill, where they are processed with the desired sieve to achieve the required mash consistency. • Easy to clean • Low maintenance requirements • Belt speed is steplessly adjustable in both directions • Equipped with 2 swivel wheels • Equipped with 2 fixed wheels Technical Information Ffjdpfx Adev Srguoajw • Nominal capacity: 2000 kg/h • Power requirement: 3 kW, 400 V, 10 A • Mash discharge height: 1400 mm • Connection for washing tank: G 6/4” • Connection for cleaning: G ½” • Material: WNr. 1.4301, AISI 304 stainless steel • Water consumption: approx. 12 L/min Dimensions: Length: 2700 mm Width: 840 mm Height: 2270 mm Weight: 150 kg

Condition: used, Used Complet Bitzer Co2 Cooling installation for processing rooms and or corridors This unit, in excellent condition, is equipped with the following main components: 1. Compressors Rack Teko ROXSTA 2.O, with 4x Co2 Compressors Bitzer 4DTC-25K-40P, and 1x Co2 Compressor 4FTE-20K-40S, and original control cabinet - Compressors Type: 4DTC-25K-40P (x4), 4FTE-20K-40S (x1) - Volume: 21.2 m3/h (x4), 17.5 m3/h (x1) - Cooling capacity for CO2: 264.5 kW at -5°C/30°C, 222.6 kW at -10°C/30°C, 153.5 kW at -20°C/30°C - Dimensions of the compressors rack: 3300 x 950 x 2200 mm - Control cabinet dimensions: 1350 x 950 x 2000 mm - Year of production : 2018 2. Evaporators - 5 pieces Guntner S-DHN 051C/24 dual discharge, full steinless steel ( Housing and block made of stainless steel ) - Type: S-DHN 051C/24- - Cooling capacity: 18.9 kW at DT8, 15.3 kW at DT7 - Surface: 101.9 m2 - Air flow: 11 240 m3/h - Fin spinning: 4 mm - Fans: 2 x 510 mm - Dimensions: 2550 x 1560 x 480 mm - Housing and block made of stainless steel - Year of production: 2019 - Volume: 25.7 L - Weight: 149 kg - Quantity : 5 pieces - Year of production : 2019 3. Evaporators - 3 pieces Guntner S-CXDHN 046C/37 dual discharge, full steinless steel ( Housing and block made of stainless steel ) - Type: S-CXDHN 046C/37 - Cooling capacity: 21.9 kW przy DT8, 17.7 kW przy DT7 - Fin spinning: 7 mm - Fans: 3 x 460 mm - Dimensions: 2950 x 1560 x 480 mm - Housing and block made of stainless steel - Year of production: 2021 - Volume: 29.9 L - Quantity: 3 pieces - Year of production : 2021 4. Evaporators - 1 pieces Guntner S-CXDHN 046C/37 dual discharge, - Type: GADC CX 035.1/41M/HEC7E.TNNN - Fin spinning: 7 mm - Fans: 4 x 350 mm - Dimensions: 3150 x 1000 x 300 mm - Electric defrost - Year of production: 2024 - Volume: 14.2 L - Quantity : 1 piece - Year of production : 2024 5. Evaporators - 4 pieces Guntner GACC CX 040.1/3-70.E-1845718M, standart cubic evaporators - Type: GACC CX 040.1/3-70.E-1845718M - Cooling capacity: 17.8 kW at DT8, 14.4 kW at DT7 - Surface: 63.3 m2 - Air flow: 8 640 m3/h - Fin spinning: 7 mm - Fans: 3 x 400 mm - Dimensions: 2370 x 550 x 580 mm - Electric defrost - Year of production: 2019 - Volume: 11.1 L - Weight: 114 kg - Quantity : 4 pieces - Year of production : 2019 6. Gascooler Guntner GVD080.4C/2x3-EK.E, V-shape Fodsxpvtcepfx Adasfw - Type : GVD080.4C/2x3-EK.E - Year of construction : 2018 - Volume : 60,2 ltr - Fans: 6x 800 mm, 490 RPM, with inverter - Dimensions: 4500 x 2320 x 2850 mm

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: GLT135SHE -2200333157, cooling capacity: 354 kW (481.31 HP), type of input current: three-phase, type of cooling: water, overall weight: 4,428 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 3 bar, temperature: 7 °C, volume flow: 60.7 m³/h, pump pressure: 2.51 bar, total width: 2,190 mm, total length: 4,530 mm, total height: 2,425 mm, warranty duration: 3 months, Equipment: type plate available, Process Chiller / Air-cooled Chiller, Type: Galaxy GLT 135 SHE Manufacturer: MTA S.p.A. The Galaxy GLT 135 SHE units are compact air-cooled chillers designed for outdoor installation (operational from -20°C to +43°C). Features include a plate evaporator, scroll compressors, control and switch cabinet, compressor shut-off valves, equipment suitable for low ambient temperatures down to -20°C (EC fans), P2 pump, 510-liter buffer tank, electric frost protection heater, condenser filter mats including Victaulic couplings. Cooling capacity (kW): 354 Chilled water temperature out/in (°C): 7 / 12 Flow rate (m³/h): 60.7 Available pump pressure (bar): 2.51 Ambient temperature (°C): 32 Refrigeration circuit: Refrigerant: R 410A Number of refrigeration circuits: 2 Number of compressors: 6 Capacity steps (%): 0-17-33-50-67-83-100 Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3 Max. power input (kW): 167.7 Max. current (A): 273.3 Starting current per circuit (A): 421.8 Protection class: IP54 Dimensions: Length (mm): 4530, Width (mm): 2190, Height (mm): 2425 Weight (kg): 4428 Connection: Victaulic DN 125 Serial number: 2200333157 Year of manufacture: 2018 Condition: Cosmetically: 2, Technically: OK & tested Used Price: on request in EUR (plus VAT, ex works Nettetal) – 3 months warranty MTA offers, upon request, a functional test of the chiller together with the buyer prior to collection at the Nettetal branch. Used machines may have visual imperfections due to previous use. (Subject to technical changes and prior sale!) Ffodexqnydspfx Adajw

Year of construction: 2008, condition: like new (used), We sell a package of 26 cooling systems - Alfa Laval brand evaporators, all of which work on the glycol cooling system. The systems are powered at 220V or 380V or have an interchangeable power supply system according to the user's needs. The year of manufacture of the systems is 2008. Ffjdpfsg N Db Hjx Adaow We can sell also piece by piece not only as a package upon request. Commercial unit coolers designed for use in small and medium cold rooms from 10 up to 400 m³. Models designed for easy maintenance with immediate access to inspection areas. This series is available as a DX evaporator and brine unit cooler. Finned coil - H(C)FC Inner grooved Cu tubing ø 12 mm, triangular tube pitch - Brine Smooth Cu tubing ø 12 mm, triangular tube pitch - Corrugated Alu-fins - Fin spacings 4, 5.5, 6, 7, 8, 10 and 11 mm. • 1 to 4 AC fans, ø 250 mm up to ø 500 mm, drawing through the coil. Fan motors 230V/50-60Hz/1ph or 400V/50-60Hz/3ph in two noise levels (H/L). Motors with dynamically and statically balanced external rotors, manufactured in accordance with VDE 0530/12.84. • Corrosion resistant materials: coil frame AluZinc, casing strong and durable sheet metal, powder-coated RAL 9002. • Hinged drip tray and side covers for easy installation and maintenance. • Sufficient space for mounting of expansion valve inside the casing. • Mounting brackets allow flush ceiling mounting. • Fitted with schräder valve on the suction connection for testing purposes. • Pumped system available on request. • Stickers indicate fan direction and refrigerant in/out. • Delivery in mounting position. Coolers are mounted on wooden beams. Installation can take place with the use of a forklift. 1 AlfaCubic series (BL, GL, RL) 2 Refrigerant system (E = dry expansion, W=water/glycol, 3 Noise level (H=high, L=low) 4 Fan diameter (25=250, 35=350, 40=400, 50=500 mm) 5 Number of fans (1 to 4) 6 No. of tube rows (A=4, B=6, C=8) 7 Phases (S= single-phase, D= 3 phases Δ connection) 8 Motor voltage (230V, 400V) 9 No. of circuits 10 Packing (CR=crate) 11 Casing material (AP= powder coated, SS= stainless steel) 12 Defrost system (A= air, E= electric defrost, HG= hotgas) 13 Fin material/coating (AL=aluminium, EP= epoxy coated aluminium) 14 Fin spacing (4, 5.5, 6, 7, 8, 10 and 11 mm) 15 Tube material (Cu=copper) The evaporator coils of these units are high performance and are built-in 1/2 ”fluted copper tube and fin corrugated aluminium with gaps of 3.5, 6 and 8mm. The frame, made of aluminium sheet, is provided with protection collars. This frame has the application of thermostatic expansion valves. Regarding their exterior structure, they are manufactured in aluminium painted in high resistance RAL-9018 polyester colour. The vibrations in these machines are avoided thanks to the fact that their entire structure is compact and highly rigid. All its parts are easily removable for maintenance. These evaporators are fitted as standard with helical fans with high-performance protection grilles and are equipped with 315 or 350mm motors. diameter. Single-phase for 230V 50Hz, with a degree of protection IP-54, with external rotor and low consumption. All motors are connected to a watertight general box, according to IP-55 regulations. Finally, defrosting is carried out with 230V electric heaters built in armoured stainless steel tubes. Its vulcanized ends avoid derivations and are inserted inside the battery and the tray. They are connected to a watertight junction box. Application: Lo

Condition: refurbished (used), functionality: fully functional, tank capacity: 10,000 l, storage for diesel 10.000 litre including a pump 75 l/m filling station Fjdpfxji An Ufo Adaefw

Condition: good (used), Year of construction: 2002, Screw Compressor Water Cooled Fabr.BOGE Type:SO150 Bj.2002 Compression final pressure 10 bar Motorl.110KW with refrigerant dryer . Mass: L3,5m B1,5m H1,7m Weight each approx. 3200 Kg. Documentation available. Ffsdeh Hi Injpfx Adasw 4. piece Available . Price for 1.piece .

Year of construction: 2026, condition: new, Our systems can be dismantled down to the base frame in just a few minutes for effective cleaning. Our belt presses are suitable for pressing fruit and vegetables. Effective belt cleaning is done with the help of brushes and a belt washing system. You only need an air compressor to operate the system. Technical Information • Rated output: 650 kg/h • Power consumption: 1 kW, 400 V, 16 A • Material: Wnr. 1.4301, AISI 304 stainless steel • Compressed air requirement: 50 l/h 6 bar • IP65 electronic control cabinet • Juice yield: Up to 75% • Fully automatic and infinitely variable belt speed control • Operator friendly • Easy to clean • Rolling machine feet Fjdpfxev Sq Rxe Adajfw Dimensions: Length: 2,230 mm Width: 1,250 mm Height: 1,250 mm Height assumptions: 1,240 mm Height of pomace discharge: 500 mm Height of juice outlet: 370 mm Weight: 480 kg Optional: Juice collection tank ISW 100 Automatic juice draining

Condition: used, functionality: fully functional, Capacity will depend on the product to be used. Fedpfx Adjwny Spjajfw

Condition: good (used), functionality: fully functional, Year of construction: 2003, The system was used for sorting frozen fruit to remove foreign objects. For further detailed technical information, please refer to the PDF. Subsequently, weighing and packaging into tubular bags is carried out. Process sequence: Transport via inclined conveyor to the vibrating table for singulation of the fruits. Then to the BEST Laser System LS 9000, which detects foreign objects and ejects them using approximately 80 air nozzles. The laser can be reprogrammed by running so-called good products (i.e., defect-free goods) through the machine. By analyzing a point cloud of the surface structure, the laser learns what constitutes good or bad products. Afterwards, the product passes over a conveyor belt with a metal detector and visual inspection. Then again via an inclined conveyor for weighing and filling into tubular bags, with a maximum bag weight of 30 kg. The tubular bagging machine is also manufactured by Vollenda. Fedpfx Adewrdfuoaefw Complete documentation is available. Additional technical data can be found in the PDF documents (original invoices). Original price of the system was €382,000; few operating hours.

Condition: good (used), mileage: 4,18,418 km, power: 132 kW (179.47 HP), first registration: 10/2010, fuel type: diesel, tire size: 245/70R17,5, axle configuration: 4x2, wheelbase: 5,100 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro5, suspension: steel, number of seats: 2, total length: 9,650 mm, total width: 2,600 mm, total height: 3,650 mm, loading space length: 7,420 mm, loading space width: 2,480 mm, loading space height: 2,440 mm, Year of construction: 2010, Equipment: ABS, cruise control, electric window regulation, tail-lift, = Additional Options and Equipment = - Digital tachograph - Trip recorder (control device) - Fixed - Halogen lamp - Short cab - Tail lift - Manual - Fabric = Notes = Number of axles: 2, configuration: 4x2, payload: 4,165 kg, unladen weight: 7,825 kg, gross weight: 11,990 kg, fuel tank capacity: 160 liters, fifth wheel coupling: fixed, suspension type: leaf spring, cab type: short cab, cruise control, trip recorder (control device), digital tachograph, electric windows, color: multicolored, lighting type: halogen lamp, speed limiter, engine power: 132 kW (177 hp), fuel: diesel, Euro: 5, transmission type: Optidriver, gearbox: ZF, speed limiter, gears: 6, power steering, ABS, starter battery, system type: ", seating capacity: 2, seating arrangement: 1+1, seat upholstery: fabric, seat adjustment: manual, refrigeration unit manufacturer: Carrier, refrigeration unit model: Supra 950 Mt Silent, refrigeration unit: diesel, ATP class: II, body insulation, wall thickness: 35 mm, cooling type: chill and freeze, day/night cooling: day/night cooling, additional evaporator, tail lift, tail lift type: rear flap, tail lift capacity: 1,500 kg, tail lift manufacturer: Dhollandia, tail lift material: aluminium, tail lift dimensions: 180 x 249, spare wheel, spare wheel tread: 4 % = Further Information = Transmission Gearbox: ZF, 6 gears, automatic Axle configuration Tire size: 245/70R17.5 Brakes: disc brakes Suspension: leaf springs Axle 1: steerable; left tire tread: 11 mm; right tire tread: 10 mm Axle 2: twin tires; left inner tread: 4 mm; left outer tread: 8 mm; right inner tread: 9 mm; right outer tread: 9 mm Weights Unladen weight: 7,825 kg Payload: 4,165 kg gross vehicle weight: 11,990 kg Functional Tail lift: Dhollandia, rear flap, 1,500 kg Loading height: 103 cm Refrigeration unit: diesel Wall thickness: 35 mm Condition Technical condition: good Ffsdpjxdabysfx Adaow Optical condition: good Damages: none Number of keys: 1 Identification License plate: BX-VB-87 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range covers all European brands, model years, and price categories. Why buy from Kleyn Trucks? It’s simple! • Large, rapidly changing stock • Recognizable quality • Good prices • Proper business conduct • We speak many languages • We understand our customers • Support with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of “recognizable quality” • And much more… Please visit our website for special offers and our full stock. Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and submit a request on our website. Ask us directly about our European warranty package.