Decoiler straightening machine

SCHULER AHR 320-2

Year of construction: 1990, condition: not inspected (used), Force: 125 tons (2x63) Speed adjustable 0-10mm/sec. Kdodpfx Aasgy Hzpsdsw Speed up: 20mm/sec Distances between columns 950x550mm Table size front 950x820mm Table size sidewise 1220x550mm Ram size see table Daylight: 700mm Stroke: 550mm Weight: 5500 kos Requested power: 18,5kw 2 precision cylinders steples adjustable strokeend

Condition: new, sheet width 2050 mm plate thickness 3 mm distance between columns 2100 mm back stop - adjustable 600 mm connected load kW weight of the machine ca. 1,1 t dimensions 2,7 x 2,1 x 1,4 m The machine works quietly and it is energy-saving by its gear motor and brake system. Kodpfx Aaefv H Dkededw Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot pedal machine.

Condition: used, Year of construction: 1996, charge load 135 liter 1220 mm tank diameter / tank height 1.220 / 1035 mm 304 mm motor capacity 0,75 kW motor speeds: 1500 U/min voltage 400 V weight of the machine ca. 600 kg dimensions of the machine ca. 1,38 x 1,28 x 1,04 m Dryer - Serial-No.: 15772 / 96-08 - Machine ON: 44.854 h Kdjdpewcg Ersfx Aadsw - Heat unit

Year of construction: 1978, condition: used, machine/vehicle number: 068242, Cup wheel Ø: 175 x 60 x 51 or 125 x 40 x 51 mm 2 grinding wheel speeds: 1450/2900 rpm table size: AT-F 205 x 345 mm Kdodpfobx Elijx Aadow space requirement: 1070 x 650 x 1180 mm Drive motor: 500 V (at 380 V 1/3 power loss), corresponding to 0.6 kW

Year of construction: 1998, condition: good (used), machine/vehicle number: 080024-38 U, Offer 23332 Technical data: - Saw blade dimension 250 x 2 x 40 mm - Saw blade spindle speed 52 rpm - cutting range at 90° round 80 mm - flat 95 x 60 mm - miter adjustable up to 45 ° - Material vice - Drive 400 V / 0,5 kW Kdodpfxsp Ebn Ss Aadjw - Space requirement approx. W 650 x H 1500 x D 750 mm - Weight approx. 100 kg

Condition: used, Year of construction: 1985, machine/vehicle number: 113785, 4 - station tool grinding machine pre-grinding - disc 200 x 50 x 51 mm - table size 400 x 200 mm re-grinding - disc 200 x 50 x 51 mm - table size 400 x 200 mm lap grinding - disc / diamant 125 - 12.5 x 51 mm - table size 400 x 200 mm chip groove - disc - 150 x 8 x 51 mm coolant device  workplace lamp motor speed 1,400 x / 2,800 rpm electrical data 380 V / 0.37 / 0.6 KW space requirements width - 1,100 x depth - 1,000 x height - Kdjdpog H Ng Dofx Aadjw 1,400 mm weight approx. 340 kg

Year of construction: 1991, condition: good (used), machine/vehicle number: 900 1241, disk of circular saw-Ø: 275 mm cutting area at 90° round: 90 mm cutting area at 90° square: 75 x 75 mm cutting area in mitre at 45° square: 75 x 75 mm Kjdpfx Aom Twgwjadsdw disk rotations: 40/80 upm engine: 380 V, 1/1/2 kW space needed: 700 x 600 x 1580 mm weight: ca. 180 kg

Condition: excellent (used), Capacity 2000 x 4 Overall dimensions 3000 x 2000 Kjdpfsuml R Eex Aadedw Rear sheet support

Condition: used, Year of construction: 1984, material width:350 mm coil weight:1 t material thickness:0,5 - 6 mm coil internal diameter:380 - 540 mm coil external diameter:1500 mm no. of straightening rolls:9 straightening roll diameter:30 mm number of draw-in rolls:2 weight of straightening machine:2 t dimensions straightener (WxDxH):2,0 x 2,0 x 1,9 mm weight of decoiler:1,3 t dimensions decoiler (WxDxH):1,7 x 1,5 x 1,6 m Kdjdpfx Aaot Hmk Tjdow

Condition: good (used), functionality: fully functional, number of straightening rollers: 7, coil outer diameter: 1,400 mm, coil inner diameter: 508 mm, roller diameter: 80 mm, number of feed rollers: 2, feed roller diameter: 80 mm, straightening roller diameter: 80 mm, coil width: 400 mm, load capacity: 3,000 kg, 1. Decoiler Make: Dimeco Model: 2371 E-FPS Year of manufacture: 2006 Load capacity: max. 3 tons Strip width: max. 600 mm Expansion range: 470 – 530 mm Coil outer diameter: max. 1,400 mm Equipped with: • Hydraulic expansion • Pneumatic hold-down roller from above • 6 strip edge guide arms • Pneumatic disc brake 2. Straightening Machine Make: Dimeco Model: 1676 C-VV Year of manufacture: 2000 Strip width: max. 400 mm Strip thickness: 0.8 – 4.5 mm Number of straightening rollers: 7 Number of entry and exit rollers: 2 each Roller diameter: 80 mm Equipped with: • Frequency-controlled drive • Hydraulic strip feeding aid with support table, feed tongue, hold-down arm from above • Pneumatically liftable entry roller • Lateral strip guide rollers Ksdpfxotgvgps Aadsdw • Pneumatically swivelling strip transfer table between straightening machine and feeder