Automatic Loading Panel Saws

SELCO EBT 120 ACTIVE

Condition: used, Numerical Control OSI Working dimensions mm 4300 x 2200 Automatic rear load with lifting table (mm) 4300 x 2200 Max blade protrusion (mm) 125 System for lifting and rotating the panels inside the machine Device for cutting thin panels (4 mm approx ) N. 10 pliers on the upper main pusher carriage N. 4 pliers mounted on the lower independent pusher carriage Twin Pusher Double lateral aligner Scoring group (max blade diameter / power) 180 / Kw 2,2 Main blade group (max blade diameter / power) 430 / Kw 15 Adjustable speed of the blade carriage (m / min) 1 - 150 N. 4 front benches for panel discharge air veil Kedpsxt Sgtsfx Abcjdi

Condition: new, ALTENDORF WA 6 sliding table saw - Exhibition machine - manual height adjustment, double roller carriage, scoring unit, pivoting, outrigger table, angle mitre fence, automatic brake, can be lowered below table height ----- Technical data ----- Swivel range: 0 - 45 °, Cutting length: 2,500 mm, Cutting width at rip fence: 1,000 mm, max. cutting height: 100 mm, max. saw blade Ø: 315 mm, Kdjdpsu R Sx Eefx Abcji Swivel range mitre fence: up to 49 °, speeds: 4,200 rpm Motor power main motor: 5.5 hp / 4.0 kW, Scoring motor power: 0.5 hp / 0.37 kW, Work table height: 910 mm, Extraction nozzle Ø: 1 x 100 / 50 mm each, Weight: 450 kg - new exhibition machine -

Condition: excellent (used), Robland 3200 silver line format saw with a trolley scoring saw with a separate engine, trolley length 320cm main engine 7KW 3 speeds max disc 450mm 0-45 tilt electrically adjustable with readout Ksdpfx Abov S Hy Ajcsdi up-down saw electrically adjustable without readout culaga on the right side motorically adjustable up to 1240mm digital readers on the culaga on the trolley angle device included Branded machine in very good condition,

Condition: good (used), Year of construction: 2014, functionality: fully functional, System consisting of: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM Max. cutting length: 4,500 mm Max. saw blade projection (main saw): 95 mm Max. opening of clamping grippers: 90 mm Min. panel dimensions from rear: 1,830 x 915 mm Max. panel dimensions from rear: 3,100 x 2,200 mm Min. panel thickness for rear feeding: 3 mm Worktable height: 985 mm Main saw motor: 15 kW Main saw blade diameter: 380 mm Scoring saw motor: 2.2 kW Scoring saw blade diameter: 200 mm DIGISET: electronic adjustment of scoring saw to main saw QUICK CHANGE: fast blade change at the push of a button Saw carriage drive: 1 - 140 m/min Integrated side aligner in saw carriage: 0 - 4,200 mm Automatic measuring system for manual cuts Pusher extension from 5,500 to 7,800 mm 10 pneumatic clamping grippers on pusher with double fingers 3 front aligners 16 support roller tracks behind the machine table 4 air-cushion tables in front of the machine table, rounded, including movement device for table 2 Automatic ejection of end pieces beyond the cutting line Material support area under the pusher equipped with brush rollers for sensitive surfaces Machine table with air nozzles for sensitive surfaces Automatic device for monitoring the main saw blade consisting of a sensor that detects blade deflection and a system for measuring main spindle speed Software package: QUICKOPTI for optimizing cutting plans directly on the machine OSI PLUS INTERFACE VERSION OPTIPLANNING OPTIMIZATION SOFTWARE incl. hardware dongle, allows management of up to 10 users via network OS LABELLING: graphical editor on the machine control system with workpiece drawings, real-time label printing directly at the machine possible COMMUNICATION BETWEEN STORAGE FEED SYSTEM AND SELCO Industrial label printer at the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8000 MM Swiveling suction frame 0 - 180 degrees with controlled axis Panel alignment/squareness correction system consisting of 3 photocells mounted on pneumatic cylinders Panel weight detection via load cell mounted on the suction frame in the separation area, checks whether the specified weight value is within the expected range for this panel type. If not, the panel is set down again and the separation cycle restarts. Kjdpfjxranpex Abcsdi Roller conveyor for stacking and unstacking: 4,200 mm Software: LINE SUPERVISOR with warehouse mapping, catalog, import of machining data from the optimizer, management of BOMs, plant control

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software Outside Rollers table for pre-loading (mm 4500 x 2200 ca.) Lifting table (mm) 4300 x 2200 Kdedoq Rfahepfx Abcoi Turning device (rotating unit) at 90° No. 2 Rear pushers (one with clamps / grippers) Twin Pusher No. 10 clamps / grippers Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 135 Max clamps opening (mm) 133 Scoring Unit (max saw diameter / power) 200 mm Main Sawing Unit (max saw diameter / power) 460 mm - Kw 27 Adjustable speed of the saw carriage (m/min) 0 - 150 Front supporting tables with Air blowing system (N.) 4 Total power (Kw) 36 (ca.)

Condition: excellent (used), Year of construction: 2005, 3-axis controlled panel saw with parallelogram support table Swiveling control panel above the table Data input via membrane keypad Electronic scoring unit adjustment Automatic parallel fence with adjustment via leadscrew and linear ball bearing guide Parallelogram support table for miter cuts Manual adjustment with angle settings from +50° to -50° perpendicular to the cutting axis with corresponding fine adjustment. Angle detection system using magnetic strip and LCD display. Crosscut stop with 3 LCD displays Extendable support table with roller support Technical Data: Cutting length mm: 3200 Main saw blade diameter mm: 450 Scoring blade diameter mm: 120 Panel cutting size with extendable stop mm: 3200x3200 Swivel range degrees: 0° / +46° Max. cutting height at 90° mm: 150 Max. cutting height at +45° mm: 130 Saw blade rotation speed rpm: 2500, 3500, 5000 Scoring blade speed rpm: 9000 Kdodpfoyftzkox Abcei Extraction port diameter mm: 120 & 100 Main motor power Hz 50 kW: 7.5 Scoring unit power Hz 50 kW: 0.75 Cutting width with parallel fence mm: 1270 Weight approx.: 1180 kg Note on used machines: • Errors in technical details and prior sale excepted. • Stated prices are ex-location, loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty or guarantee. The buyer is welcome to inspect the machines at our premises. • Special agreements are only valid in written form. (We only respond to inquiries including your address & telephone number!)

Year of construction: 2024, condition: new, Hot air stove ,wood stove,Heating Technical parameters of the furnace Nominal heating output: 44.50 kW maximum heat output: 50.00 kW / approx. 300 m2 in set: force axial fan speed: 1350 rpm and capacity: 5060 m3 / h in the set: driver Innovative design of the air jacket that completely surrounds the stove for maximum efficiency indestructible stove made entirely of p265gh and 16m06 certified boiler plates with thicknesses of # 6mm and # 10mm large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 330 kg Gross weight: 340 kg Furnace lining: 40 firebricks removable two large cast iron grids 300 x 200 mm covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look massive structure large combustion chamber large loading door User Guide Efficiency: 75.00% CO emission at 13% O2: 1.20m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / located on the nameplate Compliance with standard: EN13240: 2006 BimSchV level 2: Yes Dimensions External Dimensions: Overall Width: 580mm x Overall Depth: 1290mm x Overall Height: 1310mm Oven dimensions: Width: 480mm x Depth: 930mm x Height: 680mm Upper door dimensions (sheet 3 and 4mm): Width: 390mm x Height: 330mm Middle door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 150mm Bottom door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 150mm Top Loading Port Dimensions: Width: 315mm x Height: 310mm Center & Bottom Loading Port Dimensions: Width: 315mm x Height: 130mm Cast iron grate dimensions: Width: 210mm x Depth: 300mm Diameter hot air outlet: Ø 150mm Kjdjixup Aspfx Abcjdi Exhaust outlet diameter: Ø 150mm Leg height: 140mm Technical parameters of the fan Type of fan: axial fan Material: steel (propeller + housing) Diameter: Ø 450mm Power supply: 230V / 50Hz Engine: 4P Current consumption: 0.82A Speed: 1350 rpm Air flow: 5060 m3 / h Safety: CE mark + protective net

Condition: used, Holz Her CUT 6120 Heavy-duty precision high-performance panel saw Cutting length: 3900 mm Cutting depth: 3100 mm Saw blade projection: 82 mm CUTCONTROL 2 control system, 17" TFT touchscreen Kdsdpfeytrvijx Abcji Powerful optimization software: CD CUTTING-SYSTEM Label printer 3 air-cushion tables 1800 x 600 mm Automatic angle pressing device, up to max. 1300 mm Automatic notch-cutting device Offcut management device Remote cable control Pneumatic trimming stops Main saw unit: 11 kW, saw blade diameter 350 mm Scoring saw unit: 2.2 kW, saw blade diameter 180 mm Saw carriage feed: 0–100 m/min, stepless Saw carriage return: 130 m/min Rip fence feed: 0–100 m/min (EU 0–25 m/min) Rip fence return feed: 100 m/min Rip fence clamps: 7 units Compressed air supply required: 6 bar Extraction connection on main machine: 1 x 120 mm Extraction connection on pressure beam: 3 x 120 mm Extraction capacity: 3500 m³/h Air flow velocity: 30 m/sec Machine dimensions approx. 6000 x 6000 mm Weight approx. 5,000 kg Machine from retirement / craftsman's workshop Machine is in TOP CONDITION Ex site

Condition: new, Year of construction: 2026, functionality: fully functional, The Nanxing NPC330 is a high-performance beam saw designed for fast and precise cutting of MDF, particleboard, plywood and other wood-based panels. It is the ideal solution for furniture factories seeking high throughput and consistent accuracy. The saw carriage is driven by a 2 kW servo motor with rack and pinion transmission, reaching cutting speeds up to 90 m/min and return speeds up to 120 m/min. The powerful software package includes cutting optimization, work process management, cutting simulation, error display, and automatic label printing for efficient production tracking. Key Features Cutting height: up to 120 mm Cutting width: 3270 mm Automatic pressure beam adjusts to the total height of the panel stack for maximum efficiency Air flotation table ensures scratch-free and easy panel handling 10 pneumatic clamps (optional 12) for secure fixing and precise positioning Servo side alignment for perfectly perpendicular cuts Full protection system: operator hand protection, piano-type blade cover, optional safety fence & light barrier Quick-change main saw blade and one-click scoring blade adjustment Automatic lubrication system for longer machine life and lower maintenance costs Industrial control cabinet with international brand components, 21.5” touchscreen, PC (i5 CPU, 8 GB RAM) Technical Specifications Max. cutting length: 3270 mm Max. cutting height: 90 mm (optional 120 mm) Main saw motor: 15 kW (optional 18.5 kW), 3910 rpm Scoring saw motor: 4300 rpm Main saw blade: Ø380 mm (shaft Ø60 mm) Scoring saw blade: Ø200 mm (shaft Ø45 mm) Feed speed: 90 m/min (return 120 m/min) Total installed power: 24.2 kW Machine dimensions: 6900 × 5400 × 1820 mm Weight: 4,560 kg Power supply: 380V / 50Hz / 3-phase Air requirement: 0.6 MPa Dust extraction: Ø150 mm × 3, min. speed 28 m/s Benefits for Manufacturers High productivity: package cutting with fast forward and return speed Kdodpfx Abjxcwwpecei Excellent accuracy: ±0.03 mm thanks to heavy-duty frame and pneumatic clamping Digital optimization: AutoCut software included to minimize waste and optimize cutting plans Maximum safety: full machine guarding, light barrier, and emergency stop Operator-friendly: air flotation table and servo-driven feeding system for effortless panel handling

Condition: like new (used), Year of construction: 2011, machine/vehicle number: 0-261-04-5736, functionality: fully functional, operating hours: 806 h, workpiece height (max.): 60 mm, edge thickness (max.): 8 mm, feed rate X-axis: 11 m/min, total length: 5,700 mm, Equipment: documentation/manual, Brandt AMBITION 1440 KDF Kdsdpfxsylvpqo Abcji Year of manufacture: 2011 Year of commissioning: 2013 In very good condition