Panel saws Holzma HPL 400/43/16 2016

Holzma HPL 400/43/16

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, cutting width (max.): 4,300 mm, section length (max.): 1,600 mm, TECHNICAL DETAILS Max. cutting length: 1,600 mm Min. cutting width: 4,300 mm MACHINE DETAILS Number of transport packages: 8 pcs. Djdpfx Aoyuya Eodrsck Year of manufacture: 2016

Condition: used, Year of construction: 2008, machine/vehicle number: 0-411-49-1873, Technical data: Dcedpfeyh Hwuex Adrek - Manufacturer: Bütfering - Type: Optimat SGO 211/RC - Number of grinding units: 2 - Year of manufacture: 2008 - Working width: 1.100 mm - Grinding belt width: 1.120 mm - Grinding belt length: 1.900 mm - Workpiece thickness: 3-160 mm - Feed speed: 2,5-13 m/min. - Table height adjustment Standard equipment: - Automatic workpiece thickness adjustment - Stepless feed speed via requency converter. - 125 grinding programs can be stored - Wear-free braking system 1. Grinding unit (R) - Calibration roller - Profiled steel contact roller - Diameter 160 mm - Drive motor: 15 kW 2nd grinding unit (C) - Combination unit with roller and grinding shoe - Rubberized contact roller 65 Shore - Contact roller diameter 160 mm - Electronic link pressure bar with segment width 35 mm. - Belt speed: 12 and 21 m/s - Tolerance compensation up to 1 mm - Suitable for veneered surfaces and solid wood. - Drive motor: 11 kW - Total connected load: approx. 28 kW - Operating voltage: 400 V / 50 Hz. - Compressed air consumption at 6 bar, 20 L/min. - Belt blow-off device per pressure surge 440 L/min. - Extraction volume: approx. 2,880 m3/h/ at 20 m/s - Extraction connection: Dedusting: 1 x Ø 160 mm (grinding unit, roller) 1 x Ø 160 mm (grinding unit, shoe) Dimensions: - Length: 1,700 mm - Width: 1,850 mm - Height: 2,100 mm - Location: not in stock - Available from April 2026

Condition: used, machine/vehicle number: 008186, Max. panel width: 3200 mm Max. panel length: 3200 mm Main saw blade projection: 110 mm No of Grippers: 11 Dcjdpfx Ajxaudzedrsk

Condition: used, Year of construction: 2024, DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support designed for row drilling positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of drill bits for dowels: - 5 carbide dowel drill bits, Ø 8x77 mm, right-hand - 4 carbide dowel drill bits, Ø 8x77 mm, left-hand Basic machine DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support des Dcodoxnlflepfx Adrok

Condition: like new (used), Working width 1350 mm The machine is in excellent, new condition as shown in the pictures. Dcodsuuitgepfx Adrsk

Condition: excellent (used), Viessmann Vitoplex 350 kW low-temperature heating boiler. Can be used with oil or gas burner. Available as heating container or heating trailer. Complete system also possible as an emergency heating unit. Dsdpjx A Ipcjfx Adrsck

Condition: good (used), Year of construction: 2011, Internal flange dimensions 2340 x 1340 mm Maximum panel dimensions (20mm thickness) 2340 x 1240 mm Working chamber height 60 mm Total thrust 300 t Maximum specific working pressure 5 kg/cm2 Dcjdetwba Sepfx Adrek Press cylinders No. 6 diam 140 mm stroke 250 mm Lower moving platen (closing movement from bottom to top) Opening between press platens 230 mm Side load 1400 mm Pvc roller uncoiler Double loading table

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, * Wemhöner Basic 1000 Plus - Year of manufacture: 2008 - Very good condition, little used * Type: KT-MB-28/15-240 * With automatic pin system and inline turn-over device * 2 tables with automatic variable pin system * With Teflon coating for pre-glued foil * Foil laying system for the pin table (pre-glued foil) * Heating plate size: 2800 x 1500 mm Djdpfxsxbcude Adrsck * Maximum workpiece size: 2,540 x 1,250 mm * Membrane: Yes * Cutting station * Foil paternoster storage, 3.2 m height with 14 suspension rods * Siemens S7 PLC control * Operator panel for PLC control: SIEMENS TP 270 (touchscreen) * Automatic membrane tensioning * Installed power supply: 38.5 kW * Maximum chamber pressure: 6 bar * Maximum press opening: 150 mm * 6 cylinders with Ø 125 mm * Operating voltage: 400V 50/60Hz * Press chamber height: 40 / 60 mm * Max pressing force: 2400 kN * Hydraulic system operating pressure: 320 bar

Condition: new, Year of construction: 2022, functionality: fully functional, TAKAMAZ CNC Compact loader FC60 Lathe with automatic loader unloader quickest loading system in the world loading time new part 2,8 sec. loading cap. till 60 mm diameter. loading lenght max 50 mm max weight 1 kg per side loading feed 120 m min include part turning for loading Fanuc Control full warranty 2 year Lathe spec. Spindle motor 7,5/5,5 kw turning diameter max 180 mm turning lenght 240 mm bar cap. 35 mm collet chuck 173E till 40 mm diameter spindle nose A2-5 spindle speed 4500 rpm tool pos 8 stations tool shank 20x20 mm boring holder 25 mm diameter rapid speed X/Z 18/24 meter machine dimension 1,36 x 1,37 meter Dcodem E I D Hepfx Adrek height 1,7 meter weight 2,7 ton total power 14 KVA Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: excellent (used), Year of construction: 2017, Brandt KDF 1440 Edition Only 1700 operating hours – in very good condition – can also be supplied with a preheating station. XES 200 autonomous unit (+ €4500) available. SUMMARY OF MACHINE EQUIPMENT: JOINTER HEAD 2 X 2.2 KW 200 HZ GLUING UNIT QA 65 N SAWING UNIT BEVEL/STRAIGHT 2 X 0.18 KW PNEUMATIC ADJUSTMENT FOR SAWING BEVEL/STRAIGHT MULTI-STAGE MILLING HEAD MS 40 COUNTER-ROTATING PNEUMATIC 2-POINT ADJUSTMENT SHAPED MILLING HEAD 1 X 0.35 KW WD 60; also for structural flooring PNEUMATIC 2-POINT ADJUSTMENT RADIUS/BEVEL MULTI-STAGE SCRAPER HEAD MZ 40 GLUE JOINT SCRAPER EDGE TRIMMING UNIT Overpressure: PU rollers instead of standard rollers Additional application unit QA 65 N (interchangeable) Release agent spray unit for workpiece Automatic edge infeed Multi-roller scanning for multi-stage milling head MS 40 + multi-stage scraper MZ 40 Dcedpszb Iggjfx Adrek Cleaning agent spray unit WORKPIECE AND EDGE PARAMETERS: – Workpiece width min: – For workpiece thickness 8-22 mm ¦ 70 mm* – For workpiece thickness 23-40 mm ¦ 120 mm* – For workpiece thickness 41-60 mm ¦ 150 mm* *Depending on workpiece length – Workpiece overhang ¦ 38 mm – Workpiece thickness ¦ 8 – 60 mm – Edge height max. = workpiece height ¦ + 6 mm – Edge material, roll ¦ 0.4 – 3 mm – Edge cross-section max. – For PVC ¦ 135 mm² – For veneer ¦ 100 mm² – Roller diameter max. ¦ 830 mm – Edge material, strip ¦ 0.4 – 8 mm – Edge cross-section max. – For strips ¦ 360 mm² – Feed rate ¦ 8 – 14 m/min – Max. feed rate with shaped milling head ¦ 11 m/min – Working height ¦ 950 mm – Pneumatic connection ¦ min. 6 bar – Overall length ¦ 5,573 mm Complete description: see PDF