Lathe Ø 2000 x 35,000 mm x 63 tons
SKODA SUT 200 TD

Name: SKODA SUT 200 TD
Brand: SKODA
Availability: InStock

Year of construction

1984

Condition

Used

Location

Denmark

Lathe Ø 2000 x 35,000 mm x 63 tons SKODA SUT 200 TD

Machine data

Machine type:: Lathe Ø 2000 x 35,000 mm x 63 tons

Manufacturer:: SKODA

Model:: SUT 200 TD

Year of construction:: 1984

Condition:: used

Price & Location

Location:: Dänemark

Call

Technical details

Turning diameter over cross slide:: 1,600 mm

Turning diameter:: 2,000 mm

Turning diameter over bed slide:: 2,000 mm

Turning length:: 35,000 mm

Workpiece weight (max.):: 63,000 kg

Details about the offer

Listing ID:: A21340822

Reference number:: 9446

Update:: 27.02.2026

Description

Center Lathe
SKODA - SUT 200 TD
MACH-ID 9446

Manufacturer: SKODA
Model: SUT 200 TD
Year of manufacture: 1984

Tandem construction on one bed, with left and right headstocks
Faceplate double tailstock left and right
Double carriage
Steady rest included
Roller rest included
Operator panel with scales requires attention and replacement
Motorized tailstock for each side (left and right)
3-bed way design
Torque on chuck: 160,000 Nm
Minimum turning diameter: Ø 315 mm

Industries served:
- Shipyards
- Propeller shaft manufacturing
- Hydraulic cylinder shafts
- Camshafts
- Defence & Aerospace
- Rolls and shafts for steel mills
- Crankshafts

Specifications
Metric / Imperial
Turning length: 35,000 mm
Swing over bed: Ø 2,000 mm
Swing over carriage: Ø 1,600 mm
Spindle power: 75 kW
Bed width: 1,600 mm
Quill diameter: Ø 400 mm
Quill stroke: 250 mm
Max spindle speed: 180 rpm
Feed X-axis: 5,000 mm/min
Feed Z-axis: 5,000 mm/min
Workpiece weight: 63,000 kg

Approximate dimensions:
Length: 42,000 mm
Width: 3,250 mm
Height: 3,250 mm
Tjdpfxjynky Ao Abteb
Weight: 158,000 kg

Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend verifying all important details.

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2008

392 listings online

Call

Send inquiry

Telephone & Fax

+31 316 4... show

+31 316 2... show

Fax:

These listings may also fit your interest.

Listing

Babberich

7,060 km

Profile bending machine ROUNDO - R-4-S
RoundoR-4-S

Call

Listing

Bad Oeynhausen

6,876 km

Vertical lathe
HankookVTC 125E

Call

Condition: new, Year of construction: 2025, functionality: fully functional, turning height: 1,400 mm, workpiece weight (max.): 8,000 kg, turning diameter: 1,600 mm, faceplate diameter: 1,250 mm, total height: 5,190 mm, total width: 4,875 mm, total length: 3,885 mm, rotational speed (max.): 360 rpm, torque: 17,880 Nm, table load: 8,000 kg, overall weight: 30,000 kg, Equipment: rotational speed infinitely variable, Vertical turret lathe in flat-guided design with extensive full equipment: WITH MILLING FUNCTION - Milling spindle 2000rpm SK50 22 KW - C - axis 0.001 degrees - Complete housing - Chip conveyor - Internal coolant supply - Fanuc control - 24 tools - 12 milling tools - Manual Guide I - Tool holder package - Electronic handwheel - Signal light - Manual 3-jaw faceplate 1250mm - Renishaw tool measurement Tjdpjvtzc Ijfx Abteb - Renishaw workpiece measurement - Glass scales in X and Z axes - 24 month guarantee

See details

Listing

Oberhausen

7,010 km

Round table
ZEATZPHV-Baureihe

Call

Condition: new, ZEATZ NC rotary tables, PHV series – available for short-term delivery The ZEATZ NC rotary tables of the PHV series stand for the highest precision, stability, and flexibility in modern machining. Ideal for positioning, turning, and simultaneous machining in a wide range of applications. Your advantages at a glance: ✔ Integration into existing machines with HEIDENHAIN or SIEMENS controls ✔ Service & technical support directly from JMT Tsdpfx Aom Tvz Debtjb ✔ Fast spare parts supply ✔ Numerous reference projects available in Germany Technical specifications: Working position: Vertical / Horizontal Applications: Precise positioning, stepless turning and interpolative machining in a single setup Sizes: Table diameter: 500 / 600 / 800 / 1,000 / 1,200 mm (optional, also with square clamping surfaces) Max. workpiece weight: Horizontal: up to 20,000 kg Vertical: up to 4,000 kg Positioning accuracy: ± 3" Contact us – we will be happy to advise you and provide you with a customized offer.

See details

Listing

Wiefelstede

6,930 km

Radialbohrmaschine
Raboma12Rh2000

€4,950

Fixed price plus VAT

Call

Year of construction: 1955, condition: used, Radial drilling machine, drilling machine, boom drilling machine -Outreach: 2055 mm Tsdpfed Enr Ijx Abtob -Max. Distance from machine table to spindle mount: 1700 mm -Cone mount: MK5 -Motor power: 7.5 kW -Speeds: 11.2-1400 rpm -Columns: Ø 450 mm -Spindle stroke: 540 mm -Thread cutting device -automatic feed: 0.037-2.0 mm/rev -Clamping area: 920 x 1600 mm -Dimensions: 2580/1110/H3450 mm -Weight: 6465 kg

See details

Listing

Mobile excavator VOLVO EW 140 C Baujahr 2010

Bergkamen

6,955 km

Mobile excavator
VOLVOEW 140 C Baujahr 2010

€35,900

Fixed price plus VAT

Call

Listing

Hydr. pressbrake Daewoo Duck Sung M/C 600Sx12000L

Germany

6,627 km

Hydr. pressbrake
Daewoo Duck SungM/C 600Sx12000L

Call

Condition: used, Year of construction: 1996, Technical details: pressure: 300 t chamfer lenght: 6000 mm control: Delem DA 24e distance between columns: 2x5100 mm throat: 645 mm dayligth: 520 mm plate thickness: 5 mm total power requirement: ca. 10,0 je machine kW Tedpfeu Ib Drjx Abtjb weight of the machine ca.: ges. ca. 66 t dimensions of machine: L:12,0xB:2,3xH:3,65 m Hydr. Pressbrake 6000-300 - jib arm length= 720mm - incl. back gauge (without crowning system) adjustment travel horizontal/vertical: 680/200mm motoric Optionally, two of these press brakes can be offered - also applicable as a Tandem Pressbrake with 2x 6 meter with 300t, with table size: W:165xL.12000mm, - program sequence via both presse(synchronized) and single available Optional are tools available! Copy of documentation available i.D. *

See details

Listing

Table boring mill TOS VARNSDORF WHN 13 TOS VARNSDORF WHN 13 CNC

Babberich

7,060 km

Table boring mill TOS VARNSDORF WHN 13
TOS VARNSDORFWHN 13 CNC

Call

Condition: good (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, table load: 12,000 kg, total height: 3,900 mm, total length: 7,200 mm, total width: 5,200 mm, table length: 1,800 mm, table width: 1,600 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, feed rate Z-axis: 8,000 m/min, rotational speed (max.): 2,000 rpm, Table type boring mill TOS VARNSDORF - WHN 13 CNC MACH-ID 9612 Make: TOS VARNSDORF Type: WHN 13 CNC Tsdpfsy H Dahsx Abtob Control: Heidenhain TNC415 X - Travel: 3500mm Y - Travel: 2000mm Z - Travel: 800mm W - Travel: 1000mm Table Length: 1800mm Table Width: 1600mm Table load: 12 Speeds / ranges:2000Rpm Power: 37kW Spindle Taper: ISO50ISO/Bt/Mk Feed rate X-Axis:8000mm/min. Feed rate Y-Axis:8000mm/min. Feed rate Z-Axis:8000mm/min. Feed rate W-Axis:8000mm/min. Length: 7200mm Width: 5200mm Height: 3900mm Weight: 34500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

See details

Listing

Floor type milling machine SACHMAN MP 212

Montichiari

6,753 km

Floor type milling machine
SACHMANMP 212

Call

Condition: used, Year of construction: 2004, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,400 mm, CNC HEIDENHAIN iTNC 530 X-AXIS STROKE 6000 MM Y-AXIS STROKE 1400 MM Z-AXIS STROKE (VERTICAL) 2500 MM SPINDLE CONNECTION ISO 50 DIN 69871-B50 SPINDLE SPEED 5000 RPM MOTOR POWER S1 37 KW - S6 56 KW AUTOMATIC INDEX HEAD 1 ° X 2.5 ° TOOL CHANGER 40 PLACES COOLANT TROUGH THE SPINDLE AND EXTERNAL CHIP CONVEYOR ANCHORING PLATE 8000 X 2000 MM PERIMETER PROTECTIONS Todpjxhqivsfx Abtsb

See details

Listing

Birmingham

7,603 km

Hydraulic Press
SchulerEB 2-500

Call

Year of construction: 1990, condition: like new (used), Used Schuler hydraulic press for sale Tjdpjhcnxrjfx Abteb Brand : Schuler Schuler EB 2-500- 2.75-0.85 H-frame hydraulic press Power ( ton ) : 500 tons Table dimensions ( x-y/mm) : 3000×1800 Slide dimensions ( x-y/mm) : 3000×1800 Stroke ( x/mm) : 850 Stroke per minute from 12 to 24 Control Siemens S7 New hydraulic presses for sale

See details

Listing

CNC Lathe POREBA - TCF 160 Poreba TCF 160

Babberich

7,060 km

CNC Lathe POREBA - TCF 160
PorebaTCF 160

Call

Condition: excellent (used), Year of construction: 2001, turning diameter over cross slide: 1,600 mm, turning length: 6,000 mm, turning diameter: 1,300 mm, spindle motor power: 1,00,000 W, total height: 2,875 mm, total length: 9,550 mm, total width: 2,950 mm, workpiece weight (max.): 40,000 kg, Swing over bed Ø 1600 mm Swing over cross slide Ø 1300 mm DBC Turning Length 6000 mm Spindle power 100 kW Tailstock spindle Ø 280 Ø Stroke pinole 200 mm Workpiece weight 40000 Power 125 A Speeds / ranges 250 Rpm Tsdpfx Aoymk E Asbtsb Dimensions (Estimate) Length 9550 mm Width 2950 mm Height 2875 mm Weight 41000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

See details

Advertise here