CNC Bed-Type Milling Juaristi ML-3
Juaristi ML-3

Name: Juaristi ML-3
Brand: Juaristi
Availability: InStock

Year of construction

2020

Condition

Used

Location

Babberich

CNC Bed-Type Milling Juaristi ML-3 Juaristi ML-3

Machine data

Machine type:: CNC Bed-Type Milling Juaristi ML-3

Manufacturer:: Juaristi

Model:: ML-3

Year of construction:: 2020

Condition:: excellent (used)

Price & Location

Location:: Transito 21, 6909 DA Babberich, Nederland

Call

Technical details

Travel distance X-axis:: 8,000 mm

Travel distance Y-axis:: 1,300 mm

Travel distance Z-axis:: 2,500 mm

Rapid traverse X-axis:: 35,000 m/min

Rapid traverse Y-axis:: 40,000 m/min

Rapid traverse Z-axis:: 40,000 m/min

Total width:: 5,800 mm

Total height:: 4,500 mm

Total length:: 13,500 mm

Table length:: 10,000 mm

Table width:: 1,250 mm

Details about the offer

Listing ID:: A21454147

Reference number:: 9452

Update:: 09.03.2026

Description

Travelling Column High performance, precision and machining power
Linear guiding of RAM combined with Hydrostatic Guiding HDS
ACD2 Milling head with 5000 Rpm and 1400 Nm torq
Aitek ATC chain 60 position with L=400 and 250 diameter x 35 Kg
Filtration with IKZ 15 Bar
Chip conveyor
BLUM 3D Measuring probe
Wide bed linear guided in X-Travel W=930 mm
Rotary table driver prepared in E-Cabinet
X-Axis: 8000mm
Y-Axis: 1300mm
Z-Axis: 2500mm
Table Length: 10000mm
Table Width: 1250mm
Power on spindle: 40kW
Spindle speeds: 5000Rpm
Spindle Taper: 40ISO/Bt/Mk
Feed rate X-Axis: 35000mm/min.
Feed rate Y-Axis: 40000mm/min.
Feed rate Z-Axis: 40000mm/min.
Millinghead auto-index:0.001 x 0.001 Gr°
Gusdpfxjyr Dmdo Ahajf
Working hours: 3800H
Length: 13500mm
Width: 5800mm
Height: 4500mm
Weight: 45000kg
Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Seller

Registered since: 2008

384 listings online

Call

Send inquiry

Telephone & Fax

+31 316 4... show

+31 316 2... show

Fax:

These listings may also fit your interest.

Listing

5-axis Vertical Machining Centre Matsuura MX-330 PC10

Zevenbergen

7,166 km

5-axis Vertical Machining Centre
MatsuuraMX-330 PC10

Call

Condition: used, Year of construction: 2017, travel distance X-axis: 435 mm, travel distance Y-axis: 465 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 80 kg, total height: 2,755 mm, total length: 3,360 mm, total width: 3,870 mm, overall weight: 8,500 kg, spindle nose: MAS BBT 40, 5-axis Vertical Machining Centre CNC Control Matsuura G-Tech 31 i Table size ø 130 mm Table load 80 kg Guodpoy Ny Akefx Ahaef Number of pallets 10 max workpiece dia x height 330 x 300 mm Movement X-axis 435 mm Movement Y-axis 465 mm Movement Z-axis 560 mm C-axis (table rotation) 360° A-axis (table tilt) -125/+10° Spindle speed 50 - 15.000 R/min Spindle taper MAS BBT 40 Spindle motor 7,5/5,5 kW Magazin capacity 90 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

See details

Listing

București

5,507 km

Gear hobbing machine
WMWZFWZ 6300x40

Call

Condition: ready for operation (used), Year of construction: 1970, Gear hobber ZFWZ 6300x40 Manufacturer: WMW-MODUL Model: ZFWZ 6300x40/1 Godpfxsxln Iwj Ahaeuf Year of manufacture: 1970 Max. workpiece diameter: 7100 mm Gear width: 1500 mm Max. module: 45 Table diameter: 5300 mm Cutter diameter x width: 400x500 mm Max. helical angle: 45 degrees Hob diameter: 500 mm Hob speeds: 9–63 rpm Total power requirement: 47 kW Machine weight: 160 tons Equipped with standard hobbing head, tangential hobbing head, internal milling head, change gears, supports. Video available.

See details

Listing

Glass grinding machine Lattuada TL10 AV C

Maasmechelen

7,091 km

Glass grinding machine
LattuadaTL10 AV C

Call

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 942, total length: 9,170 mm, total width: 1,635 mm, total height: 3,100 mm, overall weight: 4,140 kg, input current: 44 A, input frequency: 50 Hz, type of input current: three-phase, input voltage: 400 V, power: 21 kW (28.55 HP), workpiece weight (max.): 800 kg, pressure: 7 bar, Lattuada TL10 AV C straight line edger mitring 0-45°, cerium. Refurbished at our warehouse in Belgium. Tested and ready to go. Godjw U Nzropfx Ahajuf

See details

Listing

CNC machining center Microcut Challenger MCV-2418

Oberweis

6,495 km

CNC machining center
MicrocutChallenger MCV-2418

€8,900

EXW Fixed price plus VAT

Call

Condition: used, Year of construction: 2005, - Fagor 8055 CNC control - Additional tank for internal spindle cooling (15 bar) 400 liters - Year of construction 2005 Technical data: - Travel X/Y/Z: 610 / 455 / 520 mm - Rapid traverse: 24 m/min - Working spindle speed: 8000 rpm Gusdpfetvf Htsx Ahajf - Tool holder: BT40 - Table size: 762 x 363 mm - Maximum table load: 350 kg - Motor power: 18 kW - Operating voltage: 400 V - Weight: 3140 kg

See details

Listing

Vertical machining center BROTHER S500x1/S700x1 W&R

Timișoara

5,911 km

Vertical machining center
BROTHERS500x1/S700x1 W&R

Call

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, spindle speed (min.): 16,000 rpm, spindle motor power: 5 W, number of spindles: 3, number of slots in tool magazine: 21, input voltage: 380 V, 4 units CNC Brother models S500X1/S700X1. Year of manufacture 2014 1 unit with 3 axes 1 unit with 4 axes with hydraulic station Guedpsyap R Djfx Ahasf without vapor filtration system 1 unit with 4 axes with hydraulic station with vapor filtration system

See details

Listing

CNC lathe Tacchi - HD3/140L Tacchi HD3/140L

Babberich

7,060 km

CNC lathe Tacchi - HD3/140L
TacchiHD3/140L

Call

Condition: excellent (used), Year of construction: 2001, turning length: 8,000 mm, turning diameter over bed slide: 2,000 mm, workpiece weight (max.): 25,000 kg, turning diameter over top slide: 1,550 mm, Swing over bed Ø: 2000mm Swing over cross slide Ø:1550mm DBC Turning Length: 8000mm Spindle bore: 150mm Spindle power: 95kW Bed width: 1400mm Tailstock spindle Ø: 260Ø Stroke pinole: 200mm Spindle taper: Metric 80Mk Workpiece weight: 25000 Power: 95A Speeds / ranges: 360Rpm Gusdpfx Ahoxxxbzsajf Feed rate X-Axis: 0 - 6000mm/min. Feed rate Z-Axis: 0 - 6000mm/min. Length: 16000mm Width: 5000mm Height: 3800mm Weight: 80000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

See details

Listing

Contamine-sur-Arve

7,060 km

Milling machine
MIKRONWF 2/3S

Call

Listing

Iserlohn

6,958 km

CNC cycle lathe
MONFORTSKNC 6

€15,500

ONO plus VAT

Call

Condition: good (used), Year of construction: 1995, CNC turning machine Manufacturer: MONFORTS KNC 6, Year: 1995 Control system: Monforts MTC K. Center distance: 2000 mm Guedpfx Ahohktd Neaef Max. turning diameter over bed: 630 mm Max. turning diameter over cross slide: 380 mm Spindle speeds: 2 - 1800 rpm Spindle motor: 21/15 kW Spindle bore: 71 mm 3-jaw chuck FORKARDT 400 mm Tool holder Multifix size C with 3 tool pockets. Space requirement: Length 4000 mm, Width 2200 mm, Height 1900 mm Weight: approx. 5000 kg Complete machine documentation available. Machine can be demonstrated in operation.

See details

Listing

CNC - Machining Center - Horizontal TOYODA FH 630 SX

Halberstadt

6,724 km

CNC - Machining Center - Horizontal
TOYODAFH 630 SX

Call

Condition: good (used), Year of construction: 2008, Ref. -No.: 10564 Manufacturer: TOYODA Type: FH 630 SX Year of construction: 2008 Type of control: CNC-Steuerung Godpexvw Izefx Ahajuf Control: Fanuc 31i - A Storage location: Halberstadt Country of origin: Japan Serial no.: NS2XXX X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 850 mm B-Axis: 360 ° Max. Workpiece Weight: 800 kg Max. Tool Weight: 27 kg Max. Tool Length: 545 mm Max. Tool Diameter: Ø 120 mm Max. Size Of Workpiece Lxwxh: Ø 1000 x 1000 mm Tool Taper: BT - 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 6000 RPM Machine length: 7000 mm Machine width: 3500 mm Weight Of The Machine Ca.: 20,1 t Further information: - Equipped with IKZ and chip conveyor - NC rotary table 360,000 * 0.001° Machine can be inspected under power by arrangement.

See details

Listing

Dugo Selo

6,295 km

Rod machining centre
ElumatecSBZ 151

€94,000

Fixed price plus VAT

Call

Year of construction: 2007, operating hours: 4,100 h, condition: good (used), functionality: fully functional, The machine is not more needed for our production and therefore its for sale. The machine is in our ownership from 2007 and it is regularly maintained. Everything works normal. Dismantling and load on truck are in price. Gujdswwtw Dopfx Ahasf Some more informations: 5-axis profile machining centre Designed for flexible and efficient machining of aluminium Autonomous clamp positioning Max. working lenght: 9.300 mm 12 pneumatic clamps Tool magazine with 20 tools capacity and saw blade 500mm Spindle working hours 4100h Additional tehnical specifications available on request

See details

Advertise here