Cylindrical Grinding Machine - Universal

STUDER S30-1

Condition: refurbished (used), Completely overhauled Studer cylindrical grinding machine Centre distance: 650 mm Djdpfxsxxy A Tj Addola Technical data and accessories as per photos and PDF.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, spindle bore: 83 mm, turning length: 1,000 mm, turning diameter: 570 mm, turning diameter over top slide: 340 mm, quill diameter: 80 mm, quill travel distance: 200 mm, overall weight: 3,200 kg, chuck outer diameter: 250 mm, Equipment: rotational speed infinitely variable, The machine is in very good condition. Immediately available! Can be tested under power. Dlodpfjwxw S Isx Addoa

Condition: good (used), Year of construction: 2015, Control Heidenhain Siemens 840 D SL Working area: 700 mm x 420 mm x 380 mm (x/y/z) Table size 840 x 420 mm BBT 30 Max. speed 10,000 rpm Direct position measuring system X,Y,Z External blown air Handwheel Nano package (increase in temperature stability) Renishaw measuring probe OMP 40-2 Automation interface incl. automation door on the left and preparation for hydraulic interface Chip conveyor (increased discharge height 1050 mm) IKZ 40 bar Additional coolant tank 400 l Coolant-blown air switchover Additional nozzles on the headstock and in the magazine Flushing in the work area via additional nozzles Flushing gun Oil and emulsion mist separator PROGRESSline Dsdpfx Aevzahxjddsla Tropical package (active cooling unit for Control cabinet, spindle and spindle motor) 2-circuit clamping hydraulics with control panel Control cabinet lighting PLC project file Single load detection E1 closure BDE interface Electronic key system Max. table load 300 kg Tool changer: Number of tool positions 15 pos. Max. tool diameter 80 mm Max. tool length 250 mm Max. tool weight 3 kg Change time chip - chip 1.5 sec Feeds: Feed speed 1 - 60,000 mm/min. Rapid traverse 60 / 60 / 60 m/min Max. feed force 5,000 N Total power requirement 25 kVA Machine weight approx. 4.1 t Space requirement approx. 3.0 x 3.0 x 2.8 m

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total height: 13,450 mm, total width: 4,135 mm, total length: 3,092 mm, load capacity per storage section: 400 kg, input voltage: 400 V, load capacity: 400 kg, Automated Warehouse Optimization Storage System Schäfer Logimat System Type: Logimat 3625 – 815 – 13,450/400 Serial No.: 916.0480-B2 (Logimat 5) Year of manufacture: 2016 Total load capacity: 2 x 30,000 kg Load per tray: 400 kg (evenly distributed) Tray dimensions: 3625 x 815 mm Approximate number of trays: 91 units Touchscreen: 15.6 inch Dledsru A Atopfx Addsa Shuttle dimensions (W x D x H): 4135 x 3092 x 13,450 mm Power supply: 400V-50Hz, 3L/N/PE, 24 A, 17 kVA This offer is valid unless the system is sold. Technical specifications per Logimat: - Maximum total capacity of Schäfer Logimat: 2 x 30,000 kg - Maximum tray capacity: approx. 91 trays, 400 kg each, evenly distributed - Tray dimensions: 3625 x 815 x 100 mm - Tray tare weight: 70 kg - Machine dimensions (W x D x H): 4135 x 3092 x 13,450 mm - System footprint approx.: 12.8 m² - Capacity with 91 trays: approx. 269 m², each tray approx. 2.95 m² - Average tray retrieval time: 26 sec - Maximum tray retrieval time: 26 sec - Average tray changeover time: 51 sec - Maximum tray changeover time: 72 sec - Machine weight without trays: 5,200 kg - Integrated LogiTilt - Integrated LogiPointer - Integrated LogiGate - Integrated LogiStainless Machines have been professionally disassembled and can be reassembled by the same technicians if required. Photos and videos of operation and disassembly available on request by email. Price: special export price Price: excl. VAT Delivery time: in stock We have three Schäfer Logimat units available in stock. Machinehandel De Leeuw BV specializes in used paternoster systems by brands such as Kardex, Hanel/Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automated storage systems like the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 250 mm, feed length Z-axis: 160 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 480 mm, spindle speed (max.): 9,000 rpm, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 1 m/min, spindle speed (min.): 100 rpm, quill stroke: 160 mm, table width: 320 mm, table length: 880 mm, X-500, Y-250 , Z- quill stroke 160 , W- traverse path machine head 480 , table 880 x 320 , max. 320 kg , fixture SF 32 , 100-9000 rpm , 5 kW , 60 Nm , Heidenhauin TNC 124 Dodpfxeq R Rb He Addola Many accessories

Condition: used, machine/vehicle number: 0001210226, pattern table size: 236 x 460 mm working table size: 200 x 500 mm working area longitudinal: 300 mm Dodpfx Ajbv S Eleddola working area cross: 160 mm spindle turning speed range: 1900 - 15000 rpm milling proportion: 1 : 1 105x165/1 : 5 44 x 80 mm space needed: 800 x 900 x 1250 mm weight: 340 kg

Year of construction: 2007, condition: ready for operation (used), - USED - 8-AXIS CNC LATHE WITH MILLING HEAD, DOWN TURRET HEAD AND COUNTER SPINDLE MAX ROTATING DIAMETER: 660 mm MAX TURNING LENGTH: 1495 mm MAX TURNING DIAMETER: 660 mm BAR CAPACITY: 65 - 65 mm SPINDLE: 35-5000 rpm; 22 kW; 254 mm COUNTER SPINDLE: 35-5000 rpm; 18,5 kW; 254 mm HEAD: CAPTO C6 ; -30°+195° ; 15-12000 rpm; 18,5 kW X-AXIS TRAVEL: 580 mm X2-AXIS TRAVEL: 150 mm Y-AXIS TRAVEL: 160 mm Z-AXIS TRAVEL: 1545 mm Z2-AXIS TRAVEL: 1490 mm B-AXIS TRAVEL: 1550 mm RAPID FEEDS X-Y-Z: 38 - 26 - 38 m/min TURRET HEAD: 9 POS Dlsdpfxjw Ey R Ho Addja TOOL MAGAZINE: CHAIN-TYPE ; 80 POS HIGH PRESSURE COOLANT: 18 Bar CONTROL UNIT: MAZATROL MATRIX WEIGHT: 11800 Kg OVERALL DIMENSIONS: 5090 x 3270 x 2830 mm ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER ; TOOL SETTER

Condition: used, Year of construction: 2006, functionality: fully functional, turning length: 780 mm, turning diameter: 270 mm, spindle motor power: 15 W, travel distance X-axis: 195 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 780 mm, Nakamura-Tome WT-300 CNC Lathe Year of manufacture: 2006 CNC Control: FANUC Series 18i-TB Machine weight: 12,000 kg Machine dimensions: Length: 5,230 mm Width: 2,500 mm Dedpewx Hicefx Addola Height: 2,300 mm Machining capacities: Max swing diameter over upper/lower carriage: Ø 310 mm (upper and lower) Distance between spindles (min - max): 120 mm – 1,200 mm Max turning diameter, main spindle/sub-spindle: Ø 270 mm Max turning length: 780 mm Spindle/bar capacity, main spindle/sub-spindle: Ø 65 mm Axis travels: X1 / X2 Axis: 195 mm Y Axis: 120 mm (±60 mm) Z1 / Z2 Axis: 780 mm B Axis: 850 mm C Axis: 360° (continuous) Main spindle and sub-spindle: Spindle speed: 50 – 4,500 rpm Spindle nose: ASA A2-6 Chuck diameter: Ø 225 mm Minimum programmable C-axis increment: 0.001° Motor power (cont. / 30 min.): 11/15 kW (both spindles) Turret No. 1 & No. 2 (identical): Static/tooling stations: 24 stations (12 live tooling) Live tooling speed: 3,600 rpm Live tooling motor power: 3.7 / 5.5 kW Turning/boring tool size: 25×25 mm / Ø 32 mm Rapid traverse rates: X1 / X2 / Y Axis: 16,000 mm/min Z1 / Z2 Axis: 24,000 mm/min B Axis: 36,000 mm/min C Axis: 100 rpm B Axis: 27,000 mm/min Included accessories: LNS bar feeder model MOVE (length capacity 2,300 mm) Chip conveyor Coolant collection tank with wash-down pump High-pressure pump with external coolant tank Various fixed and driven tool holders Tool presetting arm with dual-head RENISHAW interface Part unloading arm Manuals, electrical diagrams, and EC Declaration

Condition: good (used), Year of construction: 2007, turning length: 1,065 mm, turning diameter: 470 mm, Chip conveyor SMW 315 3 chuck 2 x Radial live tooling holders 2 x Axial live tooling holders Spindle bore 80 mm BMT-Tooling system Tool measuring probe Dledpfx Adowq Rpwedja Spindle hours 6960 / 6270 Running hours Max. turning Ø: 470mm X-Axis: 260mm Z-Axis: 1065mm Spindle bore: 80mm Speedrange: 4200Rpm Spindle power: 30kW ATC / revolver: 12 BMT Tool system Speed live tools:6000Rpm Power live tools:7,1kW Length: 3310mm Width: 1900mm Height: 1970mm Weight: 6100kg

Condition: good (used), Year of construction: 2004, spindle passage 60 mm turning length 280 mm control 840 D Siemens turning speed range - drive spindle 6300 U/min drive capacity - spindle motor 3,3 kW turret 1 Scheibenrevolver no. of tools in turret 1 8 worktool system DIN 69 880 / 25mm x-travel 90 mm z-travel 280 mm feed power 5500 N rapid traverse 24 m/min power capacity - milling spindle 5000 kW turret Schwalbenschwanz no. of tools in turret 2 6 x-travel 81 mm z-travel 80 mm feed power 5500 N rapid traverse X-axis 16 m/min rapid traverse Z-axis 24 m/min weight of the machine ca. 2,5 t dimensions of the machine ca. 6,0 x 2,0 x 2,0 m TThe INDEX ABC machine is a compact lathe for short turned parts made from bar stock. It has an inclined bed design with two independent turrets. The top turret is primarily intended for internal machining and machining, while the lower turret is used for external machining. The turret arrangement enables collision-safe working and simple programming programming with high tool availability. The large free space in the working area enables a favourable chip fall The work area consists of two turrets: ‘Turret 1’ - Disc turret with 7 radially arranged tool holders Ø 25 mm DIN 69880 and a holder for the reinforced synchronised spindle on the turret station 8. tools with 1’ holders can also be used with an equalising holder can also be used. The turret is prepared for the V-ledge system. Dledpewbvhaefx Addoa - Synchronised spindle for rear end machining, simultaneous parallel machining with main spindle. Ø42 collet chuck or 3-jaw gripper chuck for internal and external clamping and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back-boring device. Starting from the centre of the working spindle in clockwise direction, 3 stationary back-boring tools are back boring tools are arranged. These are located in the pitch circle of the synchronised spindle. The back machining is carried out simultaneously with the machining on the the working spindle. Two additional tools can also be used, can be equipped with a tool feed drive. ‘Revolver 2’ - Turret with 6 symmetrical dovetail holders and each station with 2 locating holes for cylindrical shank per station. The following tool systems can be used. - stationary tools that can be moved in the Z direction - Driven tools with cylindrical shank Ø25 (can be used in two positions per station) can be used) - including bar loader LM 3200 - + various accessories (various Ø guide half-shells/tool holders) Technical data: - Material bar diameter: (Ø 25 / Ø 36 / Ø 52)- --> round Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> square SW Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> hexagon SW Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> octagonal SW Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> bar length max. 3200 mm --> from bars Ø 25 mm, min. 2,500 mm --> up to rods Ø 25 mm, min. 1,500 mm --> bar support = approx. 300 = 6 bars Ø 52 mm Mass (bar loader) = 700 kg