CNC lathe

Takisawa TS-4000YS

Condition: used, Year of construction: 2015, TAKISAWA TS4000YS year 2015 CNC control FANUC 32i-MODEL B Max. turning diameter 315 [mm] Max. swing over bed 600 [mm] Max. Turning length 735 [mm] Stroke X axis 267 [mm] Stroke Z axis 840 [mm] Stroke Y axis -50 [mm] / +70 [mm] Stroke A axis 780 [mm] Rapid traverse rate X axis 30000 [mm/min] Rapid traverse rate Z axis 30000 [mm/min] Rapid traverse rate Y axis 10000 [mm/min] Rapid traverse rate A axis 30000 [mm/min] Spindle nose A2-8" Max. bar diameter 82 [mm] Spindle throughbore 94 [mm] Max. spindle speed 4200 [rpm] Spindle power 22 [kW] Counter spindle nose F140 Counter spindle throughbore 53 [mm] Max. counter spindle speed 6000 [rpm] Counter spindle power 11 [kW] Max. tool holder cross-section 25 [mm] Number of tool stations 15 Number of tool stations driven 15 Iodpfewq Sf Tex Aqpetg Max. speed driven tools 6000 [rpm] Lubrication tank capacity 370 [l] Total power required 37 [kVA] Supply voltage 400 [V] Chip conveyor with machine 5 live tool holders Weight 6700 [Kg]

Condition: ready for operation (used), Year of construction: 2019, operating hours: 11,111 h, spindle speed (max.): 4,000 rpm, controller manufacturer: HAAS, controller model: n/a, This HAAS ST-20 was manufactured in 2019. A robust horizontal turning machine featuring a 210mm hydraulically actuated chuck, a VDI turret with 12 tool stations, and a spindle speed of 4,000 rpm. It supports a maximum load of 330 x 572 mm and bar diameters up to 64 mm. Ideal for precision turning operations. Contact us for more information about this machine. Additional equipment • Additional Options: Driven 4000 rpm tool and C-axis, 12 stations BMT65, Automatic tool presetting arm • Features: Hinged belt chip conveyor, Lathe parts catcher • Coolant System: 208l coolant tank, Variable coolant flow • Other Features: Visual part programming system (1GB), Hydraulically actuated 210mm chuck A2-6, Early detection module for power failure, Synchronized tapping, safe running, Control touchscreen, Ethernet, HaasConnect, HaasDrop, M130, WLAN • Additional Features: Macros, SOM Machine Benefits Technical Machine Benefits Iedpfx Aqjx D Ezfepetg • Maximum load capacity: 330 x 572 mm / diameter range for bars: 64 mm • Type: vdi turret with 12 tool stations • Type: programmable hydraulic tailstock • Preparation for robot / driven toolschip conveyor and tool measurement are includedOPTIONAL: Tool holders at an additional cost. See pictures attached

Condition: good (used), Year of construction: 2007, Parts shown by hand not come. Iodpfxerpn Dvj Aqpotg Technical details shown on picture.

Condition: as good as new (ex-display), Various designs such as round, hexagonal or square and in smooth smooth version, cross-grooved version or with longitudinal and transverse grooves. A current list of available new and as-new SK32/SK42/SK52/SK65/SK80/SK100 expansion chucks can be found on our homepage. Isdpeh Dmamsfx Aqpetg We look forward to your inquiry. STALEX Machine Tools GmbH

Condition: like new (used), Year of construction: 2023, operating hours: 2,763 h, functionality: fully functional, machine/vehicle number: 346574, turning length: 500 mm, turning diameter: 276 mm, spindle speed (max.): 4,000 rpm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 21 m/min, rapid traverse Z-axis: 33 m/min, bar diameter (max.): 80 mm, Equipment: rotational speed infinitely variable, The machine was commissioned in February 2024 and has 1,778 automatic hours. It has only been used for machining plastics and brass. The subspindle is equipped with a two-jaw chuck for holding workpieces for milling contours. The machine can be inspected under production conditions at any time. It is in like-new condition. Total investment including accessories: €241,000. Equipped with a 12-station turret, all driven. Sale EXW 91413 Neustadt, Germany. Itedpfx Ajynnhwjqpsg

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 205 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 2.2 [kW] - C axis indexing precision : 1 [°] - Number of guide bush holders : 1 GUIDE BUSH HOLDER 1 - Number of positions : 10 - Number of motorized positions : 4 END ATTACHMENT - Number of positions : 7 SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 7 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2200 x 1200 [mm] - Machine height : 1700 [mm] - Machine weight : 2200 [kg] MACHINE HOURS - Number of hours under power : 34143 [h] - Number of working hours : 26657 [h] - Number of spindle hours : 15552 [h] EQUIPMENT - CNC : Fanuc 30i-model A - HFT (High Frequency Turning) - Rotating guide bush - Parts catcher - Parts conveying strip Itjdpfsxlum Tsx Aqpog - Ejection of workpiece - Coolant tank - Bar loader : FMB turbo 3-26 / 3200 A

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter over cross slide: 630 mm, turning length: 760 mm, turning diameter: 376 mm, spindle bore: 92 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 20 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, spindle motor power: 15 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,163 mm, total length: 3,560 mm, total width: 1,945 mm, turning diameter over bed slide: 780 mm, overall weight: 6,550 kg, bar passage: 81 mm, Equipment: documentation/manual, I am offering a Doosan Puma 2600 SY II CNC lathe, a high-productivity machine equipped with a Y-axis, main spindle, and sub-spindle, ideal for complete machining operations in a single setup. The machine is fitted with a bar feeder and numerous accessories, is fully operational, and can be seen running by appointment. The lathe is in excellent operating condition, regular maintenance has been performed, and it can be demonstrated in idle mode by appointment. Included accessories: . Top Automazioni bar feeder model X-Files S380SX . Chip conveyor . Tool presetting system . Bellegrandi collet chucks on main and sub-spindle . Workpiece pick-off arm with conveyor belt . Static and driven tool holders Isdjymdt Tspfx Aqpjtg

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 5, This 5-axis HAAS UMC-750SS vertical machining center was manufactured in 2021. Consider the opportunity to buy this HAAS UMC-750SS vertical machining center. Contact us for more information. Additional equipment • Coolant tank – 208 liters with mobile cart • Programmable coolant pump (M-code controlled) // Programmable Coolant Nozzle (P-COOL) • Safe Run – crash and overload detection system • Control cabinet surge protection • Voltage fault detection module (EPFDM) • Second Home Position button • Remote Jog Handle with 2m cable (RJH-XL) • Memory lock key-switch Ijdpfex U Tizox Aqpstg • Rotary axis scales • Top cover Machine Benefits Technical Machine Benefits • 30+1 tool side-mount tool changer • Through-Spindle Coolant (TSC): 300 psi (21 bar) high-pressure system. • Wireless intuitive probing system (wips) • Broken tool detection (btd) Extra Information Media display via M130 (images, videos, PDF on screen) Standard machine memory: 1 GB Control Unit 15" color LCD monitor with USB port Touchscreen control interface Ethernet interface HaasConnect remote monitoring HaasDrop wireless file transfer WiFi connectivity Controller High-speed machining (HSM) Rigid tapping Dynamic Work Offsets / Tool Center Point Control (DWO/TCPC) Macro programming, coordinate rotation & scaling Technical Specification Through-spindle Coolant Yes

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 - Number of turrets : 2 MAIN SPINDLE - Spindle nose : A2-5" - Spindle power : 11 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 51 [mm] - Max. turning diameter : 195 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle nose : A2-5" - Spindle power : 7.5 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 42 [mm] - C axis indexing precision : 0.001 [°] TRAVELS - Z stroke : 400 [mm] - X stroke : 150 [mm] - Rapid traverse rate : 36 [m/min] - Spindle / counter-spindle distance : 600 [mm] TURRET 1 - Number of positions : 24 - Number of motorized positions : 12 - X/Z stroke : 400/150 [mm] - Y stroke : +/- 40 [mm] - Live tools speed : 6000 [rpm] - Live tools power : 7.1 [kW] TURRET 2 - Number of positions : 9 POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 3072X1974 [mm] - Machine height : 1799 [mm] Iedpfx Aew Efgaoqpstg - Machine weight : 6500 [kg] EQUIPMENT - CNC : Fanuc 0i-TF PLUS - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming - 3 colors status lamp - Coolant tank * Coolant through spindle - Chips conveyor : DROITE LNS MH500 - Tool probe - Parts catcher - Parts conveying strip - Predisposition for barfeeder - Electric transformer

Condition: ready for operation (used), Year of construction: 2015, operating hours: 16,661 h, spindle speed (max.): 12,000 rpm, travel distance X-axis: 480 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 845 mm, bar diameter (max.): 67 mm, overall weight: 10,000 kg, controller manufacturer: SIEMENS, controller model: 840 D, number of slots in tool magazine: 48, swivel angle B-axis (min.): 110 °, swivel angle B-axis (max.): 110 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis DMG MORI Beta 800 TC was manufactured in 2015. It features a Siemens sl Operate 3G control, a counter spindle with a C axis, and dual chucks on both main and counter spindles. Equipped with a 48-tool HSK 63A chain magazine and a coolant system capable of 8/20 bar, it's ideal for complex turn-mill operations. Consider the opportunity to buy this DMG MORI Beta 800 TC turn-mill centre. Contact us for more information about this machine. Iodpfox H U Ezox Aqpjtg • CNC control: Siemens SL Operate 3G, 1 channel, without CELOS • Configuration: Counter spindle ISM 52 with C-axis (instead of tailstock) • Tool magazine: Chain magazine for 48 tools, HSK 63A • Coolant system: 8/20 bar, 600 l tank • Chuck rinsing for main and subspindle • Coolant supply to counter spindle Additional equipment • Workholding: • Main spindle: 3-jaw chuck SMW BBD210-66 and DMG TCC 65 collet chuck • Counter spindle: 3-jaw chuck SMW BBD210-66 and DMG TCC 65 collet chuck • Chip conveyor: Hinge type • Preparation for mist collector • Bar machining package Ø 67 mm • Tool measurement probe: Blum B-H7210 • Approx. 40 toolholders (to follow) Technical Specification Taper Size HSK 63 Through-spindle Coolant Yes Counter Spindle Yes Driven Tools Yes