Folding machine

TENSOL 6000 x 2,0 mm NC

Condition: good (used), Year of construction: 1994, 2-sided planing machine, top and bottom Constant table (always the same feed height) Godpfxshuthye Aatjkb Max. planing width: 600 mm Max. planing height: 280 mm Planer shafts with strip knives Ready for immediate use.

Condition: used, axle configuration: 2 axles, first registration: 02/2011, total length: 5,790 mm, total width: 2,550 mm, suspension: steel-air, tire size: 315/70R22.5, wheelbase: 3,550 mm, color: brown, Year of construction: 2011, Equipment: ABS, = Additional Options and Accessories = Gksdpfx Aaozdp Uieteb Other - Anti-slip regulation (ASR) - Roof spoiler - Electric windows - Refrigerator - Cruise control Other - Sun visor = Notes = Scania P280 First registration: 25-02-2011. in combination with: TRAVEL SUPREME INC First registration: 10-11-2006. Max weight: 9,000 kg. Trailer is used as a mobile training room. 2 x slide-out. Toilet. Kitchen. Stove. Ovens. Fridge. Heater. = Further Information = Tire size: 315/70R22.5 Brakes: Disc brakes Front axle: Steered; Tire tread depth left: 75%; Tire tread depth right: 75%; Suspension: Leaf spring suspension Rear axle: Double tires; Tire tread depth left inner: 80%; Tire tread depth left outer: 80%; Tire tread depth right inner: 80%; Tire tread depth right outer: 80%; Suspension: Air suspension Unladen weight: 7,470 kg Payload: 1,530 kg GVW: 9,000 kg Model number: 2 X SLIDE OUT / CAMPER / MOTORHOME = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the published texts.

Condition: used, sheet width 4080 mm plate thickness 2.0 mm ST thickness at "Niro-steel" 0.8 mm Gkjdpfexabc Rox Aatob Sheet thickness for ALU 2.5 mm cutting angle 1.3 Grad no. of strokes 34 Hub/min distance between columns 4310 mm back stop - adjustable 15.0 - 750 mm table height 820 mm Control ELGO engine output 9.0 kW weight of the machine ca. 3600 kg. range L-W-H 5250 x 2200 x 1400 mm Good condition (!!) Current new price approx. €70,000 Special price upon request The MHSU motor-driven guillotine shear is based on a torsion-free, rigid welded construction and a dynamic, quiet, and powerful gear motor. High static and dynamic rigidity is ensured by robustly dimensioned main components such as the cutter bar, support table, side supports,and the main drive unit. The motor- driven guillotine shear was developed forsheet metal and plastics processing. With these shears, you can effortlessly produce clean cuts in series. Features: - NC robust, motorized swing cut guillotine shears - with ELGO NC control unit * Digital position display of the backgauge * Adjustable from the front right * With target/actual value input * Continuous adjustment across the entire travel range * Limit switch protection - NC motorized material/backgauge - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - Support table with recessed grips - 1x hold-down bar - 1x side stop with T-slot and scale - 3x front support arms - 1x freely movable foot switch - Operating instructions Optional accessories included: - Pneumatic sheet metal holding device for thin sheet metal blanks

Condition: good (used), Year of construction: 1988, Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as inspected -Function: Manual operation (no automatic operation) -Manufacturer: RAFAMET Swivel bending machine type KM-4 -Drive: mechanical -Max. working width: 2020 mm -Max. sheet thickness: 4 mm -Stop depth: 750 mm -Connected power: kW -Dimensions: 3350/1540/H1510 mm -Weight: 3900 kg Gjdpfsv Tpxqex Aatskb

Condition: good (used), functionality: fully functional, Sheet width: 4050 mm Sheet thickness: 8 mm Cutting angle: 2 - 10° Cutting speed: 0.053 m/s Table length: 710 mm Gjdpfjxu Nc Ijx Aatjkb Machine weight approx.: 10,100 kg

Condition: used, 72″ x .187″ x 50,000Lb Paxson Loop Slitting Line Make: Paxson Material Width: 12″ – 72″ (Uncoiler 60″) Material Width: .010″ – .187″ Coil Weight: 50,000Lb Gkedpsihf Ufofx Aatob Coil ID: 20″ – 24″ Coil OD: 72″ Speed: 500 /1000 fpm Direction: Right to Left Material Strength: 40,000 yield / 50,000 psi shear Material: CR, HR, Galvanized Entry Transfer Cart Entry Coil Car Mandrel Uncoiler Powered Hold-Down Roll Powered Expansion Sliding Base Hydraulic Peeling Table Driven Pinch Rolls

Year of construction: 2004, condition: good (used), Build in 2004 Description/configuration: Complete line for automatic pallet strapping, automatic stretch-wrapping of pallets. Includes fully automated pallet conveying. Line with ""straight""-configuration, built with chain conveyors and configured as follows: > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.01 > pallet strapper Cyklop XZE-3111, REF 25778.30 > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.02 > Straight chain conveyor underneath wrapper, motorized, travel is long side leading, l~2600 mm, REF 25778.03 > ring style pallet film wrapper Cyklop GL 2000, REF 25778.40 > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.04 > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.04" Layout available max speed in pallets/h: 50 pallets/h Chain conveyor Pallet width of up to 800 mm Pallet length of up to 1200 mm max height full pallet (max passage height): ~1700 mm Height of pallet conveying (min=300mm): ~400 mm max weight full pallet: ~1500 kg Over all length equipment: ~8000 mm Over all width equipment: ~6000 mm Gkjdshrmlkepfx Aateb Over all height equipment: ~3500 mm Input Power: ~15 kw (whole line) Voltage: 400 V, 3 Ph, 50 Hz Air requirement: 6 bar Equipment at central warehouse Helmstedt with nearest airports: Hannover (~1,5 hrs), Leipzig (~2hrs), Berlin (~2,5 hrs) Condition: cleaned & in working conditions Machine available: upon request

Condition: used, gebraucht 080212 prompt, Zwischenverkauf v Deutschland 1 6020 mm 1.25 mm 1.5 mm 1.25 mm 5 5 1015 mm 835 mm 2.2 kW 7240 mm 1240 mm 1950 mm 2300 kg OVERHAULED BY THE MANUFACTURER IN 2026 / MACHINE BODY MANUFACTURED IN 1989 Electric cutting unit Gsdpfx Aaezd E U Ejtskb Angle preselection via rotary knob Infinitely adjustable upper jaw opening height Foot pedal Two-person operation via second foot pedal Operating instructions in German including CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. •HONEST INSIGHTS: Detailed photos and functional videos of the current condition •LIVE ON-SITE CHECK:Live testing is possible at our facility •DIGITAL DEMONSTRATION:Individual live demonstration via video call •RISK-FREE PURCHASE:14-day return policy Details:

Condition: new, Year of construction: 2025, functionality: fully functional, saw blade bore: 40 mm, Equipment: documentation/manual, scrap and mitre circular saws Model: ZS 170N Motor: 400 V / 2.0 kW Speed: 3500 rpm Cutting length: 410 mm (at 90°) Cutting height: 170 mm (at 90°) Gkedpfx Aoypwhpsatsb Mitre range horizontal: 45°-90°-25° Mitre range vertical: 90°-45° (left) Saw blade diameter: 420 mm Extraction nozzle: 100 mm Weight: 120 kg

Condition: used, Year of construction: 2007, Amada punch press EMK 3610NT including MP300 loading unit for sale. Gksdpew Hww Hsfx Aatjb We would like to sell the machine as a complete package with tooling and a Wilson X-Sharp grinding machine. The standard tools are listed in the attached inventory. I can send it to you via email.