Tube Furnace

Thermconcept ROK 70/500/11

Year of construction: 1993, condition: used, TYPE : DEA 400/2000 Type YEAR : n.d. Year MAXIMUM SLEDGEHAMMER PRESSURE : TON. 400 Ram capacity SLIDING STROKE : mm. 1,100 Slide strok MAX VERTICAL LIGHT : mm. 1,600 Credpfxjihf R Uo Anfec Max shut height TABLE DIMENSIONS : mm. 2,000 x 1,600 Table size RAPID SPEED : mm/sec 650 Fast stroke TABLE PRESS CAPACITY : TON. 160 Cushion capacity PRE-MILER stroke : mm. 400 Cushion stroke HEIGHT ABOVE GROUND : mm. 5,800 Ground up to floor FRONT LIGHT : mm. 3,400 Distance btw uprights LATERAL LIGHT : mm.1,600 Lateral window

Condition: excellent (used), Year of construction: 2013, GEA Modular Membrane Filtration System up to 6.25 m³/h, in excellent condition and barely used. This equipment was used for just two validation batches, and after that has been in storage. It is currently equipped with spiral-wound nanofiltration membranes but other membrane types can be used for microfiltration (MF), ultrafiltration (UF), etc. The complete original manufacturer documentation is included in digital format, comprising the operating manual, process flow charts, wiring diagrams, certificates, inspection reports, and other relevant technical documentation. The system is designed to process a maximum volume of approximately 100 m³ of product (feed) per day. An average feed flow rate of approximately 4 to 6 m³/h is assumed under the “16/4” or “20/4” operating regime (Explanation: “20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning). If, at a later stage, the daily processing capacity needs to be increased or the installed membrane surface becomes insufficient due to unforeseeable fouling effects, two empty slots are provided for retrofitting additional membrane housings. The piping and recirculation pump are already prepared for such an expansion. The membrane unit is designed for a semi-automatic cleaning-in-place (CIP) procedure. The system includes the required valves for internal circulation of cleaning solutions, followed by system flushing. Specifications - Feed volume: 400 - 500 m³/week - Feed volume: 80 - 100 m³/day - Feed volume: 4.0 - 6.25 m³/h - Production time: 16 - 20 h/day - Operating temperature: 35 to max. 65 °C Consumption - Power supply (pumps): 3 x 400 V, 50 Hz - Installed power: approx. 65 kW - Electric power consumption: 53.1 kW/h - Compressed air: 6 bar, oil- and water-free - Steam: 6 bar (max.) - Seal water: approx. 75 - 150 l/h - CIP water: approx. 19 m³/h - CIP water per cycle: 6 m³/CIP - Steam consumption per cycle: 100 kg/CIP - CIP chemicals: (e.g., membrane cleaner, acid, alkali, preservative, biocide) Limits - Max. operating temperature: 65 °C - Max. operating pressure: 30 bar - pH range for feed water: - Maximum: pH 10.0 - Minimum: pH 2.0 Cleaning-in-Place (CIP) Credpfx Aovhctwjnfec - Max. temperature: 85 °C - Max. pressure: 10 bar - pH limits (for up to 30 minutes): - Maximum: pH 10.5 - Minimum: pH 2.0

Year of construction: 2023, condition: like new (used), functionality: fully functional, Our compact extruder model EX20-25d Cedpsq R Tkwofx Anfsrc Manufacturer: PMH GmbH Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 10-192 Screw nitrided Torque 55Nm Drive Three-phase drive with frequency converter Drive power [kW] 1.1kW Barrel material: nitrided Electrical connection values 3 / N / PE Supply voltage [V] 400V at 50 Hz Control voltage [V] 24V Ceramic heating tapes [W] 1200W Number of heating tapes 3 Max. Output approx. 5kg/h Max. Processing temperature [°C] 300

Condition: ready for operation (used), Year of construction: 2019, operating hours: 14,530 h, Control Unit Brand FANUC Model 31i-Model B Cedpfxox D I Axj Anforc Main Drive Number of axis 3 This 3-axis Star SR-20J N was manufactured in 2019. It's a Swiss type turning machine designed for precision and efficiency. Ideal for intricate machining tasks, this model offers robust performance in a compact footprint. If you are looking to get high-quality turning capabilities, consider the Star SR-20J N machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 1999, condition: ready for operation (used), Volume: 1000l, max. temperature: 750°C, heating capacity: 40kW, machine dimensions X/Y/Z: approx. 2500mm/1600mm/1900mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Expected to be available from October/November 2025. Crjdpsw Emyzjfx Anfjc

Year of construction: 2019, condition: like new (used), MUT RWO 360/400-1150 retort heat treatment furnace - As good as new: hardly used - Documentation available (both electronic and physical) - Pallet with spare parts incl. TECHNICAL DATA Plant type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour. Working temperature: ≤ 1100 °C , ≤ 1050 °C in vacuum. Control constancy: ± 2 K Temperature homogeneity: ± 6 K in the range from 600 °C to 1150 °C at the end of the settling period Control voltage: 230 VAC / 24 VDC Crsdpfx Aneiryyaefsc Working space furnace: 360 x 400 mm Loading: ≤ 50 kg Heating: three-zone Pressure: ≤ 350 mbar Final pressure vacuum when cold: < 5 * 10-5 mbar with clean, dry furnace. Installation area: 900 x 1900 x 3000 mm Total plant weight approx.: 1500 kg Sound pressure level: < 70 dB We do not assume any liability for the correctness, completeness and topicality of the information.

Condition: new, Year of construction: 2025, We offer you: Paint wall TPW1515 Working dimensions (mm): 1500 (w) x 800 (d) x 1500 (h). Overall dimensions (mm): 1800 (w) x 1200 (d) x 2200 (h) Standard equipment: • 1,5 kW fan power, • Capacity: 8 640 m³/h, • 930 Pa compression, • Lighting: 2 x 36 W, • Explosion-proof Ex fan, • 3-stage air filtration, • Paint stop filter, • Filter fleece, • IP 66 control panel, • IP 65 hermetic lighting. Our cabins are characterized by a very high quality of workmanship, safety of use and the selection of cab parameters to the existing building. We advise on the selection of spray booths, dedusting systems, exhaust systems and industrial recuperation. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Guarantee. Codpjg Sikrofx Anfjrc Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O.. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) Codswugczopfx Anferc 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: good (used), Crane system with two fixed (l= ~7.000 mm) and three running rails (l= ~6.000 mm) with trolleys which allow the mounting of log clamps with hoist. Max weight per rail = 1.000 kg. Csdpfx Aneg Dgdvsfsrc Mounted from ceiling (no supporting steel structure included). Power supply via integrated conductor line inside the rails (no external wires). Compressed air with outside air pipes (not inside the rails). Option: chain hoist with log clamp to lift logs from a pallet onto a stream feeder.

Condition: excellent (used), Shimadzu Type: Prestige-21 / with AIM-8800 infrared microscope Shimadzu IR Prestige-21 infrared spectrophotometer The IRPrestige-21 is designed for both highly sensitive and broad applications in the areas of research and development. It is an excellent addition to the existing FTIR series, which covers the standard laboratory area, among other things. AIM-8800 specifications Optics: 15 x Cassegrain objective 15 x Cassegrain condenser mirror with inlet for flushing MCT detector: with liquid nitrogen monitoring system Crodpfx Asf I Ew Hsnfec Wavelength range: Type 1 - 5000 - 720 cm -1 Type 2 - 5000 - 650 cm -1 Electrically activated aperture XY Θ directional drive. The setting of the XY direction increments is 1 µm above the sample surface and 1° steps in the Θ direction (numerical input possible). Minimum setting value: 3µm Motor-driven XY sample stage Positioning range: X-axis: 70 mm; Y-axis: 30mm Resolution: 1 µm pitch Sample thickness: Reflection mode - ≤ 40mm Transmission mode - ≤ 10mm Operation via the keyboard of the main unit Measurement mode selection / XY stage operation (4-step speed control) / manual focusing / illumination control (Optional) Control via PC Measurement mode selection / XY stage operation / automatic centering / manual focusing / automatic focusing / illumination control / Aperture setting / Aperture preview / Measurement position and aperture setting recording (10 sample positions, 2 background positions) Environmental conditions: Ambient temperature: 15°C ~ 30°C Humidity: 70% or less External dimensions, weight: W410mm x D540mm x H520mm x 36kg Condition: used / used Scope of delivery: (See picture) (Subject to changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.