Processing machine

Thibaut T 108 S E

Condition: used, Year of construction: 2015, Technical details: lifting capacity: 0,8 t span width: 4375 mm Arm length: 4375 bis Kranhaken mm height lower edge cantilever arm: 3660 mm cantilever arm length from center column: 4650 mm lifting height max. hook position: 3300 mm Kjdpfxeu Nvmqs Aniodu column diameter: 410 mm rotation: momentan ca. 100° begrenzt ° total power requirement: 1,8 kW The pillar-mounted slewing jib crane consists of the following main groups: Boom Hoist: Vetter chain hoist type SICH6BF, lifting height 2000mm, hook Ø 43mm with rope safety device; load chain type 7 x 20 double chain Support column H: 4000mm with flange Ø 610mm Crane control via pendant control Beam Manual operation (slewing) Chain hoist on beam *

Condition: like new (used), Year of construction: 2023, operating hours: 200 h, functionality: fully functional, repeat accuracy: 0.05 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, positioning accuracy: 0.05 mm, type of input current: three-phase, input voltage: 400 V, table length: 4,150 mm, table width: 2,080 mm, pressure: 4,150 bar, positioning speed: 15,000 m/min, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, For sale is a CMS Smartline 2040 waterjet cutting machine, manufactured in 2023, in excellent condition with only 200 working hours. The machine has been very lightly used and is technically and visually in top condition. Technical specifications: Manufacturer: CMS Model: Smartline 2040 Year of manufacture: 2023 Working hours: 200 h Working area (X × Y): 4000 × 2000 mm Z-axis stroke: 250 mm Cutting head: 3-axis Pump: Easypump 30 HP (22.5 kW) Maximum pressure: 4150 bar Abrasive feeding system: 270 kg hopper Ksdpfx Asydpmgoniedu CNC control: OSA Open Machine condition: Very good / like new This machine is an excellent choice for companies looking to enter waterjet cutting or expand capacity without investing in a brand-new system. The machine is supplied complete with an air compressor included in the scope of delivery.

Year of construction: 1999, condition: used, Crane attached to the warehouse, 5 m reach, 500 kg load capacity, without Schmalz lifting device! Storage location: Nattheim Kdsdpfx Ajv Dau Dsnieu

Year of construction: 2017, condition: ready for operation (used), A CNC 5-axis hydro-abrasive waterjet cutting system C.M.S. Tecnocut is available. Working dimensions X/Y/Z: 3300mm/1705mm/150mm, table dimensions X/Y: 3700mm/2050mm, max. table load: 1000kg/m², rapid traverse: 40m/min, pump: CMS GreenJet Evo Electric, max. operating pressure: 4139bar, power: 34kW. Overall system dimensions X/Y/Z: approx. 5700mm/2550mm/3900mm, weight: approx. 11200kg, operating hours: approx. 1500h. The system is fully equipped except for a clamping unit for pipes. Documentation available. An on-site inspection is possible. Kdodpfszc Rc Tex Anisu

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 10 h, load capacity: 5,000 kg, lifting height: 5,025 mm, free lift: 1,130 mm, fuel type: diesel, mast type: triplex, construction height: 2,470 mm, power: 55 kW (74.78 HP), fork carriage width: 1,300 mm, fork length: 1,200 mm, empty load weight: 6,930 kg, total length: 3,300 mm, drive type: Diesel, construction width: 1,455 mm, Diesel forklift Load centre: 600 mm Fork width: 150 mm Fork thickness: 60 mm ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Triplex Transmission: Torque converter Speed class: 20 Condition: New machine Kodpfx Ajyldtqsnisdu Technical condition: New Front tires type: Superelastic Front tires size: 300x15-18 Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires size: 7.00x12-14 Rear tires condition: 80 - 100% Side shifter, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, heater, load guard, full cab, full free lift, interior mirror, beacon, wiper, reverse camera, armrest with mini lever for 4 hydraulic functions, direction switch integrated into armrest

Condition: used, Overhead crane with hoist motor and control terminal. Width: 15.5 m Height: 4.5 m (max. structural height) Depth: 7 m Condition: good, second-hand Kedpfxsy Hp T Ts Anijdu

Condition: new, empty load weight: 135 kg, maximum load weight: 615 kg, overall weight: 750 kg, axle configuration: 1 axle, permissible axle load (axle 1): 750 kg, loading space length: 3,600 mm, total length: 4,645 mm, total width: 1,754 mm, suspension: other, tire size: 155/70 R13, maximum speed: 100 km/h, trailer brake: trailer unbraked, Year of construction: 2026, Single-Axle Trailer 750 kg (Payload approx. 600 kg) For jet ski transport or boats up to 3.6 m in length Manufacturer: Thomas Trailers BT-750-JET Brand-new trailer, 2-year manufacturer's warranty First registration: 3 years TÜV 100 km/h road approval* Registration documents (COC certificate and 100 km/h manufacturer's certificate) Available immediately! Financing available! Delivery at an additional charge! Welded, hot-dip galvanized frame Paint finish in ANTHRACITE GREY KNOTT rubber suspension axle, adjustable position WPS version – waterproof and maintenance-free wheel hubs Tyres 155/70R13 on steel rims Padded support boards, 180 cm length, adjustable KNOTT strap winch, adjustable 4 lashing eyes, adjustable position Jockey wheel 13-pin electrical connection LED lights, side hinged, waterproof LED position lights white/red Plastic mudguards Technical data: Gross vehicle weight: 750 kg Unladen weight: approx. 135 kg Payload: up to 615 kg Drawbar load: 50 kg Total length: approx. 4645 mm Overall width: approx. 1754 mm Width between mudguards: approx. 1355 mm Frame width: approx. 1235 mm Aluminium rims + EUR 200.00. Trailer available immediately. Delivery possible for an extra charge! Trailer also available in other colours. Offer price incl. 19% VAT. Unbraked boat trailers with 500 kg and 750 kg available straight away. Braked trailers from 1,300 kg to 2,500 kg also available immediately. Offer and further information on request: Office Tel. +49 (0) 2254/83718-20 Specifications subject to change, errors and prior sale excepted. Pictures may show optional equipment at extra cost. Kdjdpfx Ansx Uq Dijisu *Please observe national legal requirements regarding weight and speed restrictions.

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, Coulmn-mounted slewing crane | Brand: Konecranes | Type: M50-7,0 Year of manufacture: 04/2007 The crane can be inspected at the factory by prior appointment. Condition: Barely used (used for 1–2 years solely for light assembly work). Kodpfx Anjz Ertuoiodu TECHNICAL SPECIFICATIONS: - Capacitiy: 5 tons - Jib length: 7.000 mm - Height: 7.360 mm - Swivel range: limited - Permissible weight of hoist (with counterweight): 0,6 tons - Max. hoisting speed: 16 m/min - Foundation with anchor bolts - Operation voltage: 400 V, 50 Hz - Control voltage: 48 V - Electronic carriage - Documentation - CE marking No guarantee is given as to the completeness or accuracy of the technical specifications and specifications. – Subject to prior sale –

Condition: used, Year of construction: 2013, functionality: fully functional, input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, overall weight: 520 kg, We offer this used Bottero 710C glass drilling machine, manufactured in 2013. Model: 710C Serial number: GG710C-20596 Year of manufacture: 2013 Kjdpfxjzmwrne Aniodu Voltage: 400 V Frequency: 50 Hz Rated current: 8 A Weight: 520 kg If you have any questions or require further information, please send us a message or contact us by phone.

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 03814V2200, functionality: fully functional, operating hours: 2,416 h, input voltage: 380 V, type of input current: three-phase, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 280 mm, number of slots in tool magazine: 1, total height: 2,400 mm, total length: 3,000 mm, total width: 1,200 mm, overall weight: 1,100 kg, table length: 2,200 mm, table width: 280 mm, coolant supply: 3 bar, feed length X-axis: 2,200 mm, feed length Y-axis: 1,200 mm, feed length Z-axis: 280 mm, feed rate X-axis: 7 m/min, feed rate Y-axis: 7 m/min, feed rate Z-axis: 6 m/min, spindle motor power: 4,500 W, number of spindles: 1, rapid traverse Z-axis: 6 m/min, rapid traverse X-axis: 7 m/min, rapid traverse Y-axis: 7 m/min, rotational speed (max.): 18,000 rpm, rotational speed (min.): 1,000 rpm, spindle speed (max.): 18,000 rpm, spindle speed (min.): 1,000 rpm, table height: 1,200 mm, Equipment: rotational speed infinitely variable, NUMERICALLY CONTROLLED PANTOGRAPH WITH VERTICAL PLANE MODEL "VERTICAL 2200 OPEN" WITH 3 INTERPOLATED AXES FOR WORKING MARBLE AND GRANITE basic assembly: - range: x-axis=2200 mm. y-axis=1200 mm. z-axis=300 mm; - work surface L. 2500 x H. 1250 mm; - heavy carpentry-made structure in processed and painted steel; - Side openings with loops, both on the left and on the right, for processing oversized blocks with support rolls; - slabs and carter support in inox steel; - highly deep workbench made with extruded aluminium profile ; - slab locking with n°2 clamps with mechanical blocking device; - three-phase electro spindle hp 5 1/2 gas connection with perforated shaft and rotating joint for water passage for internal and external tool refrigeration, and inverter for variation to maximum 18000 r.p.m .; Kdsdpsygxc Ajfx Aniou - openable polycarbonate protection for electro-mandrel, with safety micro; - axes movement by means of runners and sliding blocks of balls recircle; - dust tents for total protection of all moving parts; - water cooling tool system with centralized drain, including pump, decanting tanks and locking electrovalve; - electronic panel with console comprising numeric control, pc and monitor. Windows software included ARTCAM INSIGNA: - carrying out of reliefed and engraved writing, using all "true Type" fonts; - cad for carrying out drillings, cuts, engravings, millings and inlays; - import of most common types of files as dxf and dwg to create writings, drawings and stamps, reliefed and engraved logos, showr trays, sinks, arcs and portals; - automatic drilling for inserting bronze letters; - carrying out single and multiple sculptures in high and bas-relief; automatic switch off; 3D PLAN LASER laser copyng system to import manufactured products and tree-dimansional figures (bas and hight - relief) with interface and software for required dimensions