Press brake

TOSKAR EasyFab 3100-175

Condition: new, Comparable to Durma, Baykal, Ermaksan, etc. Bending length: 3,020 mm Pressing force: 135 t Approach speed: 140 mm/s Bending speed max.: 10 mm/s Return speed: 130 mm/s Stroke: 320 mm Installation height: 550 mm Throat depth: 450 mm X-axis travel: 750 mm X-axis speed: 300 mm/sec R-axis travel: 250 mm R-axis speed: 100 mm/sec Clear distance between frames: 2,555 mm Machine length: 3,730 mm Machine width: 2,300 mm Total height: 2,850 mm Table height: 900 mm Motor power: 15 kW Oil tank: 190 l Machine weight: 9,500 kg (Technical data may vary depending on equipment) Standard features: Iijdpfx Ajq Rdtqoiysg - 3 CNC axes (Y1, Y2, X) - Double-guided, stable, and precise ram - Robust, double-guided backgauge - Manually adjustable, double-guided stop fingers on linear guides - Adjustable front support arms with height adjustment - Lateral and rear safety covers - Lower die adapter rail, 60 mm - Manual upper tool clamping system (Promecam system) - Manual crowning - Foot switch with emergency stop - 380 V, 50-60 Hz, 3-phase - LED lighting Recommended options: - Dener DA 66T control - Fiessler AKAS 2M laser finger protection - FPSC Safety PLC (manual) - X and R axes with servomotors - CNC crowning for high bending accuracy - 2 additional stop fingers - Other working lengths and thicknesses available with suitable accessories! -

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 34435, functionality: fully functional, power: 37 kW (50.31 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, pressing force: 170 t, stroke length: 200 mm, operating speed: 21 mm/s, reverse speed: 180 mm/s, table width: 120 mm, table length: 3,050 mm, table height: 970 mm, throat depth: 405 mm, ram plate length: 3,050 mm, distance table to ram: 400 mm, clearance between the columns: 2,600 mm, oil tank capacity: 350 l, total length: 4,945 mm, total width: 2,000 mm, total height: 2,995 mm, overall weight: 11,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic press brake LVD EASYFORM 170/30 Touch-B Year of manufacture: 2012 Serial number: 34435 Isdpfjzk H A Dox Aiyjig Technical specifications Force: 1700 kN Working length: 3000 mm Distance between uprights: 2600 mm Stroke: 200 mm Distance table – ram: 400 mm Gap: 405 mm Turbo: PP5400 Approach speed: 128 mm/s Working speed: 22 mm/s Return speed: 200 mm/s Weight: 11500 kg Motor: 37 kW Oil: 350 L Weight: 11500 kg LxWxH: 4945 x 22000 x 2995 mm COMMAND CONTROL TOUCH-B – • Table PP8170 V-axis • EFL 90 • Top tool clamping PP3090 – Wila • Hydraulic top tool clamping PP3100 • PP3160 hydraulic clamping V-dies • Back gauge X R Z1 Z2 X’ • Safety: CE PP3580 – lasersafe • 2 supports, front

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, pressing force: 100 t, stroke length: 300 mm, operating speed: 75 mm/s, reverse speed: 75 mm/s, table length: 3,060 mm, table height: 930 mm, total length: 4,350 mm, total width: 1,820 mm, total height: 2,680 mm, overall weight: 7,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, Unique opportunity for those seeking a top-of-the-line, immediately available CNC press brake. We offer a SafanDarley E-Brake 100-3100, 100% electric, a NEW machine installed in our showroom exclusively for technical demonstrations and customer presentations. The machine has never been used in production; the few operating hours are solely related to demonstration activities. Key features: • New machine from showroom • Never used in production • Ready for immediate delivery • High-efficiency electric technology • High bending accuracy and repeatability • Reduced operating and maintenance costs compared to traditional hydraulic presses Machine configuration: • EC20 Touch graphic touchscreen control with 2D bending simulator and automatic bending sequence calculation • Motorized and independent Z1+Z2 axes • Extra back gauge Z0+Z3 • Wila upper table with hydraulic locking • Wila lower table with mechanical locking and a set of bars for using Schiavi-type dies • Mobile aluminum front supports Iisdpfx Ajzcmabeiyeg • Integrated photocells • Clear opening 590 mm / stroke 300 mm • Interface for Industry 4.0 The machine is offered for sale exclusively due to the renovation of the exhibition area and the replacement of the model currently in the showroom.

Condition: good (used), Year of construction: 2014, pressing force: 100 t, table length: 3,050 mm, clearance between the columns: 2,550 mm, overall weight: 7,700 kg, Press force: 100 t Bending length: 3050 mm Distance between uprights: 2550 mm Total power requirement: 20 kW Machine weight approx.: 7,700 kg Accessories/Equipment: - Light curtain in front of the machine - AMADA tool holder with quick-release mechanism - Tools - 2 stop fingers - DELEM DA 60 touch control system - Foot switch Iodpfx Aeztakgeiyoig - Side protective doors - Operating hours: 2,948 h - 6 axes, Y1, Y2, X, R, Z1, Z2

Condition: excellent (used), Year of construction: 2005, operating speed: 10 mm/s, reverse speed: 120 mm/s, working width: 3,100 mm, bending force (max.): 120 t, back gauge travel distance Z-axis: 1,000 mm, control type: CNC control, Max. bending length: 3100mm Distance between column: 2550mm Max. pressing force: 120T Dis. Beam - Table: 470mm Beam stroke: 180mm Troth beam: 400mm Iiedpfx Aexzf Dzsiyeg Approch speed: 200mm/min. Working speed: 10mm/min. Return speed: 120mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: Y1 / Y2 / X / Z1 / Z2 / R-Central Crowning: Yes Hydraulic toolclamping: Yes Power: 7.5kW Length: 5700mm Width: 1800mm Height: 3100mm Weight: 9650kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Equipment: CE marking, documentation/manual, CNC control, with graphic display Pressing force: 175 tons Maximum bending length: 3000 mm Network connection 4-axis controlled Iisdjzcg Rmjpfx Aiyeg Pressing force: 175 tons Maximum bending width can be up to 8 mm Automatically controlled table pre-tensioning

Condition: good (used), Year of construction: 2008, functionality: fully functional, Well-maintained, used E Brake by Safan Type E Brake 100 3100 Iisdpfx Aiszbhk Eeyeg Capacity 3100 x 100 tons Y1, Y2, X, R, Z1, and Z2 CNC controlled Manual crowning Hydraulic Wila NS top clamp

Condition: good (used), Year of construction: 2014, functionality: unexamined, Press force: 100 t Bending length: 3050 mm Distance between uprights: 2550 mm Machine weight, approx.: 9,000 kg Space requirement, approx.: 4000x2100x2700 mm Accessories/Equipment: Iiedjzd Tnyspfx Aiyog - 2 support arms in front of the machine - Lazer Safe - 4 stop fingers - Foot switch - Delem DA 75 W control system - Side safety doors - Amada tool holder - Crowning

Condition: used, Year of construction: 2007, Bystronic AFM EP 31-160 - CNC press brake Bending length: 3100 mm Capacity: 160 t - Cybelec DNC 880S CNC control system - Controlled axes: Y1, Y2, X, R - Laser safety device - Hydraulic crowning - Air bending - Including many tools - Including operating manual - Operating hours: 7266 - Number of bends performed: 315673 - Year of manufacture: 2007 Technical data - Capacity: 160 t - Table length: 3150 mm - Work table width: 60 mm Iiodpfx Aioziduzeysg - Working height: 920 mm - Distance between side frames: 2450 mm - Overhang: 300 mm - Opening height: 465 mm - Number of cylinders: 2 - Stroke length: 200 mm - Approach speed: 100 mm/s - Bending speed: 9.8 mm/s - Retraction speed: 95 mm/s - Tilting of the upper bending beam: +/- 13 mm - Crowning: Hydraulic - Air bending: Yes - Adjustment of the upper tool: Manual - Adjustment of the die: Manual - Number of fingers on the slide: 2 - X-axis range of the slide: 600 mm - X-axis travel: 600 mm - Min. X-axis travel speed: 400 mm/s - R-axis travel: 150 mm - R-axis rapid traverse: 150 mm/s - Z1-Z2 travel: 2400 mm - Z1-Z2 rapid traverse: Manual - Accuracy of the X-axis: 0.1 mm - Accuracy of the Y-axis: 0.01 mm - Accuracy of R-Z1-Z2: 0.1 mm - Accuracy of Z1-Z2: Manual - Floor-standing installation: Yes - Machine dimensions WxHxD: 4100 x 2680 x 2200 mm - Motor power: 15 kW - Machine weight: 9400 kg

Condition: used, functionality: fully functional, control type: PLC-controlled, degree of automation: automatic, Equipment: CE marking, CraneMasterStoreLinear S-DOWN 1530: A loading and unloading device offering an efficient connection between the machine and the storage system. It makes the automation of storage, logistics, and loading and unloading of material and cut parts, including the associated offcuts, even more efficient. It offers all the automatic functions expected of a CraneMaster system, such as efficient loading of material from the storage to the cutting machine's pallet, and simultaneous unloading of cut parts to the storage or to a discharge station. The system is recommended for manufacturing and service companies expecting the highest performance, with production ranging from low to medium or high volume. Additional Options: - Automatic sheet separation - Automatic sheet thickness measurement - Anti-collision system - Automatic grate cleaning system - Gripper adjustment system - Additional conveyor for cut parts - Independent control of suction cups - Double the number of suction cups Iiedpfxozrfy De Aiysg - Precise measurement of the weight of the storage tower eTower 240 sheet storage system – This is an automatic sheet storage system that works with the loading and unloading system of the CraneMasterStore or CraneMasterStoreLinear laser cutting machine. The eTower2 material storage system consists of a storage column, which also functions as a transport column, with an elevator moving within it. The elevator's task is to move shelves between the storage columns and the loading and unloading locations. In addition, the system is equipped with a movable external loading and unloading station.