Electro-hydr. tube bending machine

TRACTO Tubomat 2060

Condition: good (used), Brand Ercolina Model CE40H3 Year of manufacture 2006 Hydraulic drive Hsdpfx Asw Hx Tvoiyenl Roller diameter Ø 165 mm Shaft Ø 40 mm Tube capacity (thin-walled) Ø 70x1.5 mm min. Ø 700 mm Tube capacity (thick-walled) Ø 2" x 3.2 mm min. Ø 450 mm Angle section capacity 50x50x6 mm min. Ø 400 mm Flat bar capacity 50x10 mm min. Ø 250 mm Flat bar capacity (hard edge) 100x15 mm min. Ø 250 mm Box section capacity 50x50x3 mm min. Ø 500 mm Shaft capacity Ø 35 mm min. Ø 250 mm Power 1.85 kW Bending speed 10 rpm.

Condition: as good as new (ex-display), operating hours: 6 h, power: 4 kW (5.44 HP), volume flow: 0.57 m³/h, pressure (max.): 10 bar, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, RENNER industrial piston compressor with refrigeration dryer Suction capacity: 700 l/min (delivery rate: 570 l/min) Maximum pressure: 10 bar Pressure vessel: 270 l Motor output: 400V, 4.0 kW Dimensions: 970 x 795 x 1880 mm Hnsdpfx Asd Dhwnoiyol Upright design for industrial applications, robust belt guard, galvanized compressed air vessel according to AD2000 guidelines (with hand hole) with intercooler and aftercooler, anti-vibration mounts for effective vibration reduction, with refrigeration dryer, optionally with automatic condensate drain for refrigeration dryer and vessel; Various other configurations available

Condition: new, Year of construction: 2024, machine/vehicle number: 302340, Profile Bending machine KB Türkei model MB 30 Hsdpfjd S Uf Sex Aiyonl bottom shaft 30 mm top shaft 35 mm two rollers driven with basement capacity: up to round tube 48 x 3,0 mm flat material 50x10 mm square tube 40x40x3,0 mm weight 170 kg motor 0,75 kw 400 Volt 50 Hz 3 ph.

Year of construction: 2024, condition: new, New mechanical and electromagnetic clutches and brakes for Bulgarian machine tools of the following types: CU400, CU500, CU502, CU580M, CU582, C11MT, C11MB, C11, C13B… We also offer a wide selection of various spare parts for the above-mentioned machine tools, most of which are available from stock, while for the rest we offer the fastest possible delivery times. Hnodpev Rpn Tefx Aiyjl We cordially invite you to cooperate!

Condition: new, Year of construction: 2026, UNIBOHRFIX 100 H Fully automatic drilling machine, measuring length 6000mm Item No. 6020 With the fully automatic drilling machine UniBohrFix 100, your material is positioned on the X-axis at the desired position, clamped and drilled. All you have to do is press the start button. Round tubes, rectangular tubes and angle profiles, as well as flat and solid materials, can be conveniently pneumatically clamped in the horizontal gripper of the positioning system. After simply entering the X values ​​and calling up a program that has already been written, the machine works completely independently. The Y-axis can be adjusted by the operator using a handwheel with a digital display. Hnjdpfx Aiofu Itboyjl Advantages • A sequence of holes is automatically executed at precise intervals. • Potential operator errors are drastically reduced. • Programming takes just a few minutes. • Very good value for money. • Significant reduction in labor force Fully automatic execution Measuring length: 6,000 mm Total length: 13,500mm NC 1-axis control Pneumatic vice (span 200 mm) Minimum quantity spray unit with holder and spray nozzle Drill: Unimax 3T AV (for technical data see data sheet) anti-rotation device motorized height adjustment tapping device NC positioning system PD 200p Feed force 200 kg Positioning according to absolute and incremental dimensions possible Carriage with DC servo motor and encoder Trolley with 12 ball bearings Pneumatic stop clamping with high holding power Steel guide rail with precision toothed rack Steel carrier profile to protect against dirt Infeed and outfeed material roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / load capacity 200 kg/m / rollers adjustable in height / mounting bracket / roller width 407 mm / insert plates / struts / roller diameter 50 mm / steel rollers

Condition: used, Year of construction: 2003, operating hours: 4,428 h, Price: On request - Year: 2003 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Operating hours: 4428 - Drive system: CNC - Control system brand: Siemens - Power [kW]: 37.0 - Operating pressure [bar]: 4137 - X-axis travel [mm]: 6500 - Y-axis travel [mm]: 3300 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Hnjdpfx Aijwnidhoyol Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2023, sheet width 1540 mm plate thickness 4 mm upper roll diameter 110 mm diameter of lower rolls 110 mm bending roll diameter 110 mm total power requirement 1,1 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 2,5x0,6x1,1 m New machine Cone bending equipment, hardened and ground rollers, motorized bending roller stationary control panel, digital display bending roller right and left, Hnsdpfx Asvx Uvxjiyol digital display bottom roller

Condition: used, Pillar drilling machines Hnjdpfx Aob N Ezrsiyel

Condition: new, Year of construction: 2020, CNC engraving machine MÜLLER LCF - 2 Travel: X 375 mm Y 570 mm Z 90 mm Technische0.321020121002 Daten: Table size 700 mm x 480 mm Weight: 50 kg External dimensions: Length: 700 mm Width: 500 mm Height: 350 mm Accessories : Hnedef Tnf Ujpfx Aiysl Calculator Screen Keyboard Mouse Software Control Kress cutter Vacuum pump Valve spray With it versch. Collets and cutters - NEW

Condition: new, Year of construction: 2026, Drilling and milling machine Kudu with CNC control and tool changer (3-axis) drilling and milling machine with movable processing unit - the table remains stationary, the drill head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The data can be transferred to the machine control using the file formats DXF./DWG. be carried out via a programming station. Alternatively, the system can also be programmed directly on the machine control. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Stable machine base • Drilling head speed: up to 2500 rpm (standard version), is supplied with the right speed for your application. Hnsdjfu Ivzjpfx Aiysl • Tool holder: SK 40 • Drive of the X, Y and Z-axes via servomotors • Rapid traverse in the X-axis: 20 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance from upper edge of table to lower edge of tool holder 400 mm • Table width 480 mm • Working height: 1050 mm • Drilling diameter: 3 to 30 mm in St. 50 (depending on the tool) • Tapping: M4 - M30 (with compensating chuck) • Machining path in the Y axis: 300 mm • Tolerance in the X axis: + - 0.1 mm • Tolerance in the Y-axis: 0.06 mm • Tolerance in the Z-axis: 0.06 mm • Drill head drive motor: 5.5 kW • System weight: 2300 kg • System dimensions: 8050 mm x 3000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Control touch screen panel 21.5", reinforced front glass • Easy programming on the Machine • Milling of long holes and circles • Lubrication takes place using a minimum quantity spray system • without material vices • Remote maintenance possible using Teamviewer (LAN interface) • Tool memory for drilling tools, with dimensions, speed • Simulation of work processes • Digital hand wheel Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming & operation • Minimum quantity spray system (standard) • Programming errors are prevented by CAD /CAM excluded