LASER CUTTER

TROTEC SPEEDY 360 (Gravieren, Schneiden)

Condition: new, Year of construction: 2025, Guowei 68 - available immediately on stock in Europe Product Description： Cutting knife and paperweight are controlled by hydraulic transmission. Fully hydraulic drive makes the machine more secure and imported hydraulic parts ensure the stability of the system. The machine has the function of a reference setting and keeping, and the effectiveness of the reference and self-diagnostic function; infrared protection and hands button interlock protection device; precise paper pusher guide, high precision of alignment and rear angle. Computer system adopts 10-inch colorful full-touch screen, servo motor driven,. The data resolution is 0.01mm, with self-diagnostic function and operation mode display, 100 program groups, more than 10,000 different cutting positions, dynamic tracking, max paper pushing speed 5-10 m / min, and it has imported hydraulic components; electric components from France, Japan, Korea. Its key parts adopt imported bearing of low maintenance. Model / Specifications 68 Cutting width(cm) 68 Max.cutting height without assistance pressing plate(cm) 8 Max.cutting depth(cm) 68 Min cutting depth without assistance pressing plate(cm) 2 Extended length of working table(cm) 53 Height of working table(cm) 92 Machine width including side working table(cm) 126 Total length of working table(cm) 150 Cutting speed(r/min) 20 Max. Paper pressure(n) 10000 Power of main motor(kw) 2.2 Servo Motor for paper feeding(kw) 0.4 Machine weight(kg) 800 Overall dimension(L × W × H)(cm) 167*137*172 Duodpfx Aou Rz S Isg Rel

Condition: used, machine/vehicle number: 932639 A690, Format trimmed 510x320 mm min 158x110 mm Format trimmed max 500x315 mm min 148x105 mm Power Dujdpjbg Hnhofx Ag Rjl max 14000 c/h min 2000 mm

Year of construction: 2013, condition: new, wood baking oven with direct heating baking area 1,0 x 0,7 x 0,25 m (L x W xH) 8cm heatingstones Duodpfx Agoygm Us Rel also available with fully automatic pelletfiring system

Condition: used, Year of construction: 2018, functionality: fully functional, ∙ BQ-470 (2018) - USED - HORIZON BQ-470 (EVA) Total Counter: 609212 - AC-470L (Delivery Conveyor Long) - VS-470 (Smoke Extractor) ∙ Specifications Binding Modes: Binding with milling, Binding without milling, and Pad binding Dedexr S Arjpfx Ag Rjul Number of Clamps: 4 Book Block Size (Top-Bottom x Fore-edge) Max. 320 x 320 mm Min. 145 x 105 mm Book Thickness: 1 to 65 mm (Book thickness may be limited depending on sheet weight, book size, and milling depth.) Cover Size: Max. 320 x 660 mm Min. 135 x 225 mm Cover Stack Height: Max. 150 mm Warm-Up Time: 60 min Cycle Speed: Max. 1,350 cycles per hour (EVA) Voltage / Frequency: 3-Phase 200V. 50 / 60 Hz

Condition: good (used), Paper cutting guillotine Ideal 4850-95 EP Machine in very good condition. Not used in production. Technical data: working width: 475mm stack height: 80mm minimum remnant: 35mm max distance of saddle from knife: 450mm 230V power supply Basic features: The machine has an EP programmer with the function of moving to a given dimension and saving individual steps to the device’s memory. After calling the program, the machine moves to the given and next step from memory. electromechanical knife, clamp and saddle drive automatic clamp synchronized with the knife cutting movement electronically controlled saddle adjustment knob with adjustable travel speed Djdpfxjwt Srls Ag Roul transparent covers on the front and rear tables two-handed cutting start, electronically controlled automatic knife return from any position optical cutting indicator Additional equipment: tapping block, cutting stick, knife replacement tools, documentation.

Condition: used, Spectro Type: SpectroMaxX LMD08 / LMX08 Date: 24.07.2020 Full analysis with the stationary spark spectrometer SpectroMaxX: With the help of the spark spectrometer, the alloy contents and accompanying elements of macroscopic solid samples can be can be determined with high precision down to the ppm range. Different analysis methods are available for the base materials iron, aluminum, magnesium, copper, nickel, titanium and lead, measuring methods adapted to the relevant alloy families are available. Advantages: Fast analysis within a few seconds Highly accurate spectral analysis including C and N Dodpfxju S Ahqs Ag Reul Compact design (table-top device) Areas of use / application: Testing the chemical composition of 31 ferrous and non-ferrous metals Composition of 31 ferrous and non-ferrous metals metals, nitrogen and other elements Description of the system: Open spark stand for high sample throughput Wide range of sample geometries possible Simple change of base The following elements are available as a base: Al, Cu, Fe, Mg, Ni, Ti, Pb The analyzable elements and concentration levels depend on the methods available for the respective base element Usable wavelength range 170-670 nm Output of measured values in concentrations or intensities Selectable output units (%, ppm) Output of statistical characteristic values (mean value, RSD) SPECTROMAXx LMX08 Technical specifications: CCD optics: High-resolution CCD multi-detectors Stabilized against temperature fluctuations Effective wavelength range: 140-670 nm, the applicable and configured wavelength range is wavelength range depends on the customer's application requirements. Automated profiling Analysis modules: Freely selectable analysis modules Optimized to customer requirements Expansion with additional modules possible on site Spark stand: Open spark stand for high samples Throughput and various sample geometries Minimized argon consumption thanks to argon saving module Optimized argon flow Reduced cleaning intervals Spark stand plate can be easily replaced Temperature-absorbing design without water cooling Integrated shutter system for optimum plasma view Excitation system: Fully digitized plasma generator with digital discharge definition, digital pulse generation and digital offline pulse control 32 MHz microcontroller Max. Spark duration: 4000 µs Max. Spark power 4 kW Display system: Separate microcontroller for each CCD Serial source interface Spectrometer: External, state-of-the-art computer PC system with Windows operating system Keyboard and mouse Monitoring Software: Spark Analyzer Pro MAX software for analytical operation and calibration Continuous automatic hardware diagnostics in the background Automatic verification and identification of alloy/quality Results Manager Online maintenance scheduler Ambient conditions: Room temperature: 10-30°C Conditions: (10-30°C) Relative humidity:

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: AC, throughput speed: 2,000 mm/s, Equipment: documentation/manual, Built in 2008 Size max 320 x 430 x 70 mm min 105 x 140 x 2 mm Book block thickness max 70 mm min 2 mm Cover size max 435 x 650 mm min 140 x 208 mm Speed max 2.000 c/h Duedpfxsuyx Avs Ag Rjl Length 3.700 mm Width 1.400 mm Height 1.300 mm Equipment milling station • dust extraction • PUR gluing unit • premelter for PUR glue • gauzing/- back stripping station • pile cover feeder • cover pressing station • belt delivery • packer stack delivery standards • 1 set of operator manuals • 1 set of standard tools • information: • condition: cleaned in very good working condition • location: Germany Helmstedt

Condition: excellent (used), Here we offer Polychromix Phazir NIR spectrometer. Portable Near Infrared Analyzer Model: 1624 Specifications Spectral range: 1600-2400 nm. Pixel pitch 8nm Optical resolution 11nm Dedpfjn Arm Tsx Ag Rjul Scattered light

Condition: ready for operation (used), Size: max 750 x 1.050 mm min 40 x 75 mm section height: max 165 mm Stroke height :1.300 mm lifting capacity: 200 kg Power requirements: 3,1 kW (220/380V, 50Hz) Width: 1.425 mm Depth: 2.970 mm Dujdpfsd N D Nvsx Ag Rsl Weight: 850 kg (approx.)

Condition: new, Year of construction: 2024, Guowei 52 - available immediately on stock in Europe Cutting width CM 52 Max.cutting height without assistance pressing plate CM 7.5 Max.cutting depth CM 52 Min cutting depth without assistance pressing plate CM 2 Extended length of working table CM 47.5 Height of working table CM 87-90 Duodpeu Nxd Sefx Ag Rjl Machine width including side working table CM 79 Total length of working table CM 120 Cutting speed R/MIN 15 Manx. Paper pressure N 7000 Power of main motor KW 2.2 Motor for paper feeding KW 0.2 Machine weight KG 370 Overall dimension CM 137*92*146