Run press

TRUMPF TruBend 5085

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 23,390 h, controller model: TASC 6000, overall weight: 8,600 kg, pressing force: 85 t, operating pressure: 300 bar, TECHNICAL DETAILS Pressing force: 85 t Pressing force: 850 kN Hedpfjz Hxtdox Airsw Operating pressure: 300 bar MACHINE DETAILS Control system: TASC 6000 Control voltage: 24 V Follow-up time: 95 ms Follow-up distance at 220 mm/s: 10 mm Follow-up distance at 160 mm/s: 8.5 mm Safety distance: 190 mm Voltage: 3 × 400 V Rated current: 24.0 A Frequency: 50 Hz Connected power: 17.0 kVA Compressed air connection: 6 bar Dimensions & Weight Dimensions (L × W × H): 2,500 × 1,500 × 2,000 mm Machine weight: 8,600 kg Operating hours, hydraulics: 23,390 h

Condition: defective spare-parts repository (used), Year of construction: 1997, machine/vehicle number: 885258, Defective hydraulic CNC press brake Offer 25514 Technical data: - max. working length 3060 mm - distance between uprights 2690 mm - max. pressing force 1300 kN - max. distance table / ram 370 mm - upright overhang 410 mm Hsdpfx Aex Ew Dqsirow - ram stroke 215 mm - stroke speeds - downward speed, no load max. 200 mm/sec - upward speed 135 mm/sec - downward pressing speed 1 to 11 mm/sec - total drive power 18 kW - pneumatic connection 6 bar - space requirement approx. W 3800 x H 2400 x D 2400 mm - weight approx. 11500 kg - includes: - with 6-axis CNC control DELEM - two-hand control panel with foot switch - crowning device - controlled back gauge with height adjustment 5 - 860 mm - hydraulic upper and lower tool clamping - die table movement pneumatically assisted - Machine does not reference because 2 axes on the right side of the back gauge are not functioning; control module may be defective.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, stroke length: 445 mm, overall weight: 8,600 kg, pressing force: 85 t, operating pressure: 300 bar, control voltage: 24 V, TECHNICAL DETAILS Control system: TASC 6000 Pressing force: 850 kN Stroke: 445 mm Operating pressure: 300 bar Follow-up time: 95 ms Follow-up travel at 220 mm/s: 10 mm Follow-up travel at 160 mm/s: 8.5 mm Hjdozlc Ryjpfx Airjw Equipment: 4-axis rear stop, bending aid MACHINE DETAILS Safety clearance: 190 mm Voltage: 3 x 400 V Rated current: 24.0 A Frequency: 50 Hz Connected power: 17.0 kVA Control voltage: 24 V Compressed air connection: 6 bar Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,500 x 2,000 mm Machine weight: 8,600 kg Note: The operating hours can be found in the last image.

Condition: as good as new (ex-display), Year of construction: 1988, machine/vehicle number: 1116/87, MANUFACTURER: ELTERMA/IPSEN MODEL: VDFC-413 DESCRIPTION: Vacuum tempering furnace Hsdpfsm E Tvhox Airow YEAR OF PRODUCTION: 1988 STATUS: New unused, need revamping of the obsolete parts ( Cabinets ) Max Load Dimensions: 610x900x500mm Max Load Weight: 500 kg Working temperature: 150-750⁰C Approximate warm-up time of the vacuum chamber at 550 ° C for 30 minutes

Condition: good (used), Year of construction: 2019, operating hours: 5,800 h, functionality: fully functional, Timesavers 42 Series WRBW (Belt Sander / Rotary Brushes / Belt Sander) Year of manufacture: 2019 Only 5,800 operating hours! Hjdpfjz A Ucmsx Airew Includes an ATEX exhaust system from Ulmatec. Inspection is also possible.

Year of construction: 1990, condition: used, machine/vehicle number: 9072492, nominal capacity: 100 kVA throat: 500 mm spark plug air gap: 330 - 500 mm electrical connection: 400 V kW Hedpfx Aijz H Dysrsw space needed: 700 x 1420 x 2000 mm weight: 750 kg

Condition: excellent (used), throat depth: 1,100 mm, nominal power at 50% duty cycle: 96 kVA, short-circuit current: 31,500 A, input voltage: 400 V, type of cooling: water, overall weight: 830 kg, Equipment: type plate available, Spot welding machine, type PMS 11-4 G3, 3-phase DC version - specifically designed for welding aluminum sheets - rarely used, completely inspected and cleaned - fully functional, ready for demonstration - rated voltage 400V/50Hz - rated power 96 kVA - welding current 23 kA - connection cable cross-section 10 sq mm/phase - fuse rating 63A - arm reach 1050 mm (!!) - electrode arm diameter 60 mm - electrode holder diameter 30 mm - electrode force 600 daN - stroke 65+25 mm - electrode cone MK2 Hedpfxoh N Sc Ee Airsw - control unit MPS 8043/1 from Harms & Wende with current ramp-up and pulse function - with operating manual - 2-stage foot switch according to UVV standards - main machine switch - pneumatic maintenance unit - weight approx. 830 kg - complete documentation with wiring diagram, compressed air circuit diagram, and cooling water circuit - VAT can be shown separately - delivery from warehouse in Dresden approx. 4 days within Germany - export may take longer! On-site commissioning is subject to a charge and will be billed according to the actual effort involved. The machine is located in Dresden, near the A17 highway, and can be inspected and demonstrated by appointment.

Year of construction: 1982, condition: used, In Good Condition Hedpfxedq Ug Io Airew

Condition: like new (used), Year of construction: 2017, functionality: fully functional, operating hours: 11,700 h, power: 8.9 kW (12.10 HP), travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 27,000 rpm, The machine is used for fine machining of small pieces. (Al, steel) Hjdpfsq N Ayfex Airew

Condition: excellent (used), functionality: fully functional, Timesavers Series 22-1050-WMDMD Hedpjznlxrofx Airsw The Series 22-1050-WMDMD, with a working width of 1050 mm and a table opening of 0.8-100 mm, is ideally suited for processing laser-cut, stamped, water jet-cut, or plasma-cut parts, thanks to its 3 stations. The belt grinding station allows for the removal of burrs and protruding edges. Subsequently, the edge burrs are removed and the edges are slightly rounded using the disc brushes. To achieve a uniform result, we have incorporated two oscillating brush stations in which the disc brushes rotate alternately to the left and right. Thanks to the quick-change system for belts and brushes, the machine can be reconfigured in just a few steps. The conveyor belt, as well as all other stations, are frequency-controlled, allowing for stepless speed adjustment.