Press brake + loading robot

TRUMPF TruBend Cell 5000

Condition: used, Year of construction: 2018, controller model: , _____ Description: Year of manuf. : 2018 Control : Technical data Year of manufacture:2018 Pressing force approx.:3200 kN Folding length approx.:4420 mm Control system:TASC 6000 Projection:420 mm Free upright clearance approx.:3680 mm Usable installation height approx.:615 mm Machine weight approx.:23400 kg Equipment :- Sturdy machine frame :- Press beam, stress relieved with high bending strength :- Spherical bearing of the press beam (inclined position) :- Electro-hydraulic top drive with 4-cylinder technology :- Optical set-up and positioning aid :- Generous edge clearance :- Flat front covers :- Block hydraulics :- Electronic pressure compensator :- Measuring system with glass scale and deflection compensation :- Hydraulic oil in the machine (lifetime lubrication) :- Oil cooler :- Control cabinet cooling via air-to-air heat exchanger :- Modern machine design Extended equipment :- 6-axis backgauge system :- Hydraulic upper tool clamping :- CNC crowning :- Work area lighting front and rear BendMaster (150) :- Sturdy base body and manipulator in cast aluminium construction :- Load capacity 150 kg, plate plus gripper :- Low floor track in welded construction :- Sheet sensor for contour detection :- Rotary feed-through for easy gripper change :- Gripper coupling on BendMaster :- Sensors for 4-axis backgauge system :- Electric drives :- Double sheet detection :- Regripping station NC Ijdpoyy Hgqjfx An Detf :- Vacuum generation for suction gripper :- Platform (300 mm) for the bending press Extended BendMaster equipment :Extended BendMaster equipment - Track extension to 12 m :- Sensor system for 6-axis back gauge :- Gripper changing console :- Vacuum gripper, undefined :- Modular vacuum gripper with separation (material for 3 grippers) :- Gripper coupling :- Tong gripper :- Sheet removal station with linear axis :- Side door on right for safety fence

Condition: used, Year of construction: 2004, pressure 80 t chamfer lenght 2550 mm distance between columns 2050 mm Stroke beam 350 mm max. opening beam/table 620 mm Iodjxyzzaspfx An Dstf C-recess 420 mm traveldistance X1+X2 cnc programmable 700 mm Z1+Z2 axes controlled by cnc 0-2000 mm max. distance R-axes 200 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 24000 h length 3380 mm width 1800 mm height 2750 mm weight 6100 kg total power requirement 9 kW dimensions of the machine ca. 3x2x2,5 m All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 61,469 h, controller manufacturer: TRUMPF, controller model: TASC 6000, This TRUBEND Cell 5000 with TruBend 5085 extended version (2720 mm x 850 kN) and BendMaster 60 was manufactured in 2015. World's first bending automation with image recognition for maximum flexibility. Sheet metal parts up to 40 kg, 6-axis backgauge sensor technology. Maximum repeat accuracy thanks to angle sensor technology (ACB) in automated operation. It features a stable all-steel frame, electro-hydraulic top drive, and a modern block hydraulic system. The control unit is a TRUMPF TASC 6000 with a 15-inch touchscreen and network capabilities. Ideal for precise bending operations, consider the opportunity to buy this TRUMPF TruBend Cell 500 press brake. Contact us for more information about this machine. • Machine: TruBend 5085 (2720 mm x 850 kN) with BendMaster 60 • Stable all-steel machine frame • Press beam with spherical bearing and tilt adjustment • Electro-hydraulic top drive with 4-cylinder technology • Generous edge clearance • Flat front covers • Modern block hydraulics • Electronic pressure balance • Measuring system with glass scale and spring compensation • Hydraulic oil in the machine (lifetime lubrication) • Oil cooler • Control cabinet cooling via air-to-air heat exchanger • Modern machine design • Stop/Backgauge • Stop system Ijdpfex Imqljx An Djtf • Backgauge system: 2 axes (X and R) • Tool clamping • Upper tool holder, manual clamping, hardened • Lower tool holder, hydraulic clamping, hardened • Lower tool shift, 2 positions, pneumatic • Crowning • Manual crowning • Control • TRUMPF TASC 6000 • Graphical workshop programming • Windows XPe (embedded), Pentium 4, 2.8 GHz • 2 GB RAM • 15-inch touchscreen • Network-enabled • Teleservice via modem • Operation • Control panel with LCD keypad and foot switch • Communication rail • Safety • Standard safety devices • BendGuard safety device for upper tools up to 390 mm • CE marking Additional equipment • TRUMPF BendMaster automation (standard features) • Robot/Handling • Stable base and manipulator in die-cast aluminum • Load capacity 60 kg (workpiece plus gripper) • Low-profile welded floor track • Sheet metal sensor for contour detection • Rotary feedthrough for easy gripper change • Gripper coupling on the BendMaster • Sensors for 4-axis backgauge system • Electric drives • Double sheet detection • NC gripper transfer station • Vacuum generation for suction grippers • Control • TRUMPF PC control with operator terminal • Teleservice via modem • Operation via screen, mouse, and keyboard • Safety • Safety fence with access doorWorld's first bending automation with image recognition for maximum flexibility Sheet metal parts up to 40 kg, 6-axis backgauge sensor technologyMaximum repeat accuracy thanks to angle sensor technology (ACB) in automated operationTruBend 5085 (2720 mm x 850 kN) with BendMaster 60

Condition: good (used), Year of construction: 2009, functionality: fully functional, operating hours: 14,367 h, stroke length: 445 mm, throat depth: 420 mm, travel distance X-axis: 860 mm, controller model: TASC 6000, working width: 4,420 mm, bending force (max.): 320 t, distance between stands: 3,680 mm, installation height: 615 mm, control type: CNC control, degree of automation: automatic, back gauge adjustment: CNC-controlled, number of axes: 6, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, angle measuring system, documentation/manual, foot remote control, safety light barrier, TruBend Cell 5000 – Robotic Bending Cell 320t Complete Service History - 6-axis backgauge system with control cabinet air conditioning - Sensors for 6-axis backgauge - Hydraulic upper tool clamping Iodpfx Anjylanko Djtf - CNC crowning - Preparation for ACB - MobileControl - Rear work area lighting - Front work area lighting - Operator comfort package with screen, mouse, and keyboard - BendGuard - BendMaster 150 - Track extension 16,000 mm - NC grip re-orientation station - Double sheet detection - Right-hand side door for safety fence - Vacuum gripper - 3x pneumatic gripper couplings - Robust machine frame in full-steel construction, ram stress-relieved annealed - 4-cylinder upper drive - Block hydraulic system with low-noise double pump - Backgauge with CNC-controlled X and R axes - Hydraulic upper tool clamping - Hydraulic lower tool clamping - Control cabinet cooling via air-to-air heat exchanger - Machine control network connection Control - TRUMPF TASC 6000 Safety - Standard safety equipment

Condition: used, Used 3D Printer EOSINT M 270 low operating hours (4910) Itodowd Ulvspfx An Djf

Condition: excellent (used), Year of construction: 2017, operating hours: 3,200 h, pressing force: 130 t, Space requirement: 11,500 mm x 10,000 mm + Increased installation height/lift + 230 mm + 4-axis backgauge system + Rear work area lighting + Front work area lighting - TruBend documentation Automation BendMaster (60) Standard equipment: BendMaster - Sturdy base frame and manipulator made of cast aluminum construction - Load capacity 60 kg, sheet plus gripper - Low-level floor track in welded construction - Sheet sensor for contour detection - Rotary feedthrough for quick gripper change Gripper coupling on the BendMaster - Sensor system for 4-axis backgauge system - Electric drives - Double sheet detection - NC regrip station - Vacuum generation for suction grippers Iedpfx Aoxayl Den Dstf Control - TRUMPF PC control with operator terminal - Teleservice via internet - Convenient operation: screen, mouse, keyboard Safety - Safety fence with access door Special equipment + Track extension to 10 m + Gripper change console + Modular vacuum gripper without separation (materials for 3 grippers) + Modular vacuum gripper with separation (materials for 3 grippers) + Clamp gripper with rotary axis + Sheet removal station with linear axis + Additional pallet for sheet removal station + Right-hand side door for safety fence (or left-hand side in combination with ToolMaster) Machine - Robust machine frame entirely in steel construction - Press beam - Spherical mounting of pressure beam with inclined position - Electro-hydraulic upper drive system with 4-cylinder technology - Optical set-up and positioning assist with control valves - Generous free space for bending - Flat front covers - Block hydraulic system - Electronic pressure gauge - Measuring system with glass scale and spring-back compensation - Hydraulic oil in machine (lifetime lubrication) - Oil cooler - Electrical cabinet cooling via air-to-air heat exchanger - Modern machine design Backgauge System - 2-axis backgauge system, X and R axes Tool Clamping - Hydraulic upper tool clamping - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - CNC crowning Control - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15-inch touch screen - Network capability - Teleservice via internet Operation - Control panel with LCD keypad and foot switch - Communication rail - MobilControl Safety - Standard safety equipment - CE marking

Condition: good (used), Year of construction: 1997, TBT ML 200-2-850 deep hole drilling machine TECHNICAL DATA Type: M200-2-850 Number of spindles: 2 Drill carriage stroke: 850 mm Iedpfx Aovca Rcen Dotf Drilling method: Single-lip drilling Drilling depth with: Submersible spindle: 120 mm Sealing housing: 400 mm Sealing housing with bezel: 350 mm Spindle drive Power: 2 / 3.5 / 1.5 kW Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Feed - own drive Feed speed: 20 - 500 mm/min Rapid traverse speed NC operation: 12 m/min Feed force: 1.5 kN Motor power: 2.2 Nm at 3000 rpm Clamping tailstock Motor power: 0.75 kW at 1000 rpm Spindle speed: 500 rpm Stroke max: 200 mm Main dimensions L x W x H: 4600 x 2500 x 2100 mm Transport weight: 3200 kg Control: Sinumerik 805 M No liability is assumed for the correctness, completeness and up-to-dateness of the information provided

Condition: excellent (used), Year of construction: 2018, laser wavelength: 1,030 nm, power: 5 kW (6.80 HP), Manufacturer: Trumpf Model: TruDisk 5001(6C) Year of manufacture: 2018 Laser power: 5 kW Wavelength: 1030 nm Beam quality: < 100 µm Central sensor interface: yes OEM laser: yes Output power 1: 100% Output power 2: 100% Output power 4: 100% Beam quality output 1: ≥ 4mm x mrad, ≥ 100µm NA01 Beam quality output 2: ≥ 4mm x mrad, ≥ 100µm NA01 Beam quality output 4: ≥ 4mm x mrad, ≥ 100µm NA01 Active laser power control: yes Live power display: yes Panel computer: yes Processing optics cooling: yes Water connection set: yes Itodpjr Izwmsfx An Dof Ethernet in user area: multiple Number of occupied fiber links (LLK): 4 Number of intelligent optics: 4 Number of active couplings: 4 Number of couplings: 4 LLK coding (ILN): yes LLK type: LLK-D TLS number: 20-10-03-A105 Additional interfaces: no Parallel interface: yes Interface output 1: Profinet Interface output 2: Profinet Interface output 3: Profinet OPC UA interface: yes VisionLine preparation: yes Number of VisionLine Basic: 2 Number of VisionLine Detect: 0 Number of VisionLine Interface: 1 Number of VisionLine Project: 0 I-PFO preparation: no PFO Smart Teach App: no TLS machine: no TruControl Module Cutassist: no CE/UKCA declaration: Installation declaration with annex

Condition: used, Year of construction: 2007, machine/vehicle number: 001669, Lg 33121 Single side decoiler ARKU AH 3000/ST-M year of manufacture 1995 belt width max. 600 mm load capacity max. 3.000 kg coil outer diameter max. 1.800 mm Spreading hydraulic Pressing arm hydraulic Decoiler with auxiliary drive and brake Itedpfx Ashigmbsn Def coiler chair fixed + reel traversing device with: Lg 33221 High performance belt leveler LORENZ BRM 50/620.9 year of manufacture 2007 Machine no. 001669 passage width max. 620 mm number of straightening rolls 9 Straightening roll diameter 50 mm Material density 0.7 to 6.0 mm Straightening rolls supported several times against deflection All rolls driven by transfer gearboxes and cardan shafts. cardan shafts. Used, in as-is condition from stock, available immediately. On request with overhaul. Delivery time by agreement. Further data shortly or on request.

Condition: used, Year of construction: 2007, TECHNICAL DATA Travel X 760 mm Travel Y 510 mm Iodpfxowud Afe An Dstf Travel Z 610 mm Table clamping surface 1020 x 510 mm T-slots / table 5 x 18 mm x 100 mm Distance spindle to table min./max. 150/762 mm Spindle taper steep taper DIN 69871 ISO 40 Spindle speeds 10–10000 rpm Drive power (30 min/continuous duty) 11 kW Max. torque 236 Nm Constant power from 500 rpm Coolant tank 190 l Linear guides with ball bearings in X, Y, Z axes Rapid traverse X/Y/Z 30 / 30 / 20 m/min Feedrates programmable 3.0–7600 mm/min Positioning accuracy ±0.01 mm Repeatability ±0.005 mm Automatic tool changer (double-arm) 24 positions Internal cooling Chip conveyor