Press brake

TRUMPF TrumaBend V130

Condition: good (used), Year of construction: 2000, functionality: fully functional, CNC press brake, 6 axes - Pressing force: 1,300 kN - Bending length: 3,060 mm Itsdpfx Aqex S H Uxopeg - Number of axes: 6 programmable (X1, X2, R1, R2, Z1, Z2) - Y-axis rapid traverse: 200 mm/s - Y-axis working speed: 11 mm/s - Y-axis return: 135 mm/s - Travel speeds: X - 500 mm/s, R - 300 mm/s, Z - 1,000 mm/s - X-axis travel: 600 mm - Max. back gauge range X: 860 mm - R-axis travel: 250 mm - Y-axis stroke: 365 mm - Installation height: 535 mm - Y-axis tilt: ±10 mm - Bending length: 3,060 mm - Clear distance between uprights: 2,690 mm - Throat depth: 410 mm - Table width: 120 mm - Working height: 1,050 mm - Oil capacity: 250 l Dimensions: Width: 3,640 mm, Depth: 2,210 mm, Height: 2,885 mm Weight: 12,950 kg The machine can be inspected under power!

Condition: used, Year of construction: 2008, sheet width 3100 mm plate thickness 6 mm rear stop 1000 mm cutting angle 1,2 ° Itjdpfxsvuz Tpe Aqpeg down holder 14 Stk no. of strokes 18 Hub/min oil volume 150 l total power requirement 11 kW dimensions of the machine ca. 3900 x 1900 x 1600 mm weight 5500 kg Equipment: - Hydraulic swing cut shears - ELGO control system - Electric backgauge 1000 mm - Manual cutting gap adjustment - Cutting length limitation - Ball rollers in the table - 2x front support arms - 1x front side stop with scale - Front finger guard, hinged - Rear safety device (protective grille + light barrier) - Foot switch - Operating instructions

Condition: excellent (used), Year of construction: 2000, Technical specifications: Working length: 3050 mm Distance between columns: 2690 mm Press force: 130 t CNC control: DELEM DA65 2 D graphic Adjustable backgauge Controlled axes: Y1 / Y2; X; R; I CNC table bending compensation: Wila Moducrown Hydr. Tool clamping at the top and bottom Pneumatic tool shifting Number of bending aids: 2 Installation height: 535 mm Stroke: 220 mm Thrust: 410 mm Motor power: 12.5 kW CE mark Dimensions (length x width x height): approx. 3800 x 2350 x 3150 mm Weight: approx. 14 tons Accessories: Isdowimvwepfx Aqpotg 1 set of standard tools Condition: Good condition, tools in mint condition The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2001, pressure 130 t chamfer lenght 3060 mm distance between columns 2690 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec table width 120 mm table height 1050 mm tiltable up to +/- 10.0 mm Number of working hours ca. 31.800 h compressed air 5.0 - 7.0 bar oil volume 250 l operating pressure 340 bar voltage 400 V total power requirement 23.0 KVA weight of the machine ca. 12950 kg range L-W-H 3660 x 2310 x 2900 mm Equipment: - CNC electro-hydraulic folding/die bending press - DELEM CNC control - swiveling front left * High-resolution graphic screen * Clear, concise menus in the operator's language * Large tools and products library * Graphical 2D programming * automatic bending sequence calculation and collision detection * EMERGENCY stop button at the front - CNC axis adjustment: * Y1 - Y2 - X - R axis CNC crowning * Manual adjustment of the 2x stop fingers, from the front (Z axes) - CNC electro-motorized table crowning - CNC electro-pneumatic die displacement (I axis) - WILA / TRUMPF upper tool clamping - hydraulic Iedpsyn R Hvefx Aqpetg - WILA / TRUMPF lower tool clamping - hydraulic - 2x front, robust support arms - movable - 1x freely movable 2-hand/foot control - 1x free-moving foot switch - Lateral safety device (hinged doors) - rear safety device (sliding doors) - original operating instructions ( french )

Condition: ready for operation (used), Year of construction: 2014, operating hours: 23,915 h, pressing force: 255 t, total height: 3,000 mm, overall weight: 15,000 kg, travel distance X-axis: 600 mm, travel distance Z-axis: 1,900 mm, product length (max.): 4,100 mm, number of axes: 5, This 5-axis Bystronic Xpert 250/3100 press brake was manufactured in 2014. It features a press force of 2500 kN, bending length of 3100 mm, and a throat depth of 400 mm. The machine includes a robust 22 kW main motor and operates with high precision. If you are looking to get high-quality bending capabilities, consider the Bystronic Xpert 250/3100 machine we have for sale. Contact us for more information about this machine. • Units available: 2x similar units • Standard stroke [S]: 265 mm • Open height [D]: 550 mm • Distance between side frames: 2750 mm • Throat depth [T]: 400 mm • Table width: 60 mm • Max. backgauge range in X (2/4/5 axes): 1050 mm • X-axis speed (2/4/5 axes): 650 mm/s • X-axis accuracy (2/4/5 axes): +/- 0.04 mm • R-axis travel (2/4/5 axes): 250 mm • R-axis speed (2/4/5 axes): 200 mm/s • R-axis accuracy (2/4/5 axes): +/- 0.1 mm • Z-axis speed (4/5 axes): 1500 mm/s • Z-axis speed (6 axes): 1200 mm/s • Z-axis accuracy (4/5 axes): +/- 0.1 mm • Approx. max. Y-rapid traverse: 200 mm/s • Approx. max. Y-rapid traverse in High Speed*: 220 mm/s • Max. Y-working speed: 10 mm/s • Approx. max. Y-working speed in High Speed*: 20 mm/s • Approx. max. Y-working speed in High Speed for robot operation*: 20 mm/s • Y-axis accuracy: 0.004 mm • Oil capacity: 445 l • Main motor power: 22 kW • Weight: 15 t • Machine width [W]: 2050 mm Technical Specification Bending Length 3100 mm Itjdpfxjx D Dw Ss Aqpog

Condition: used, Year of construction: 1996, pressure 130 t chamfer lenght 3060 mm distance between columns 2690 mm column arm 410 mm stroke 215 mm dayligth 385 mm ajustment speed 200 mm/sec working feed 1-10 mm/sec return speed 135 mm/sec table width 120 mm table height 1050 mm tiltable up to +/- 10 mm Number of working hours 53.820 h compressed air 5.0 - 7.0 bar oil volume 250 l operating pressure 340 bar voltage 400 V total power requirement 16.0 KVA weight of the machine ca. 11250 kg range L-W-H 3640 x 2210 x 2375 mm - in checked condition - machine video - ?v=23IbxRaZ2KA Equipment: - CNC electro-hydraulic press brake - including DELEM CNC control model DA 65 * swiveling control panel, front left * 2D graphic programming & product display * tool & program library * including new TFT-LCD industrial monitor - CNC controlled axes: Y1 + Y2 / X / R - CNC electro-motor / controlled back stop (X axis) - CNC electro-motor / controlled height adjustment (R axis) - manual adjustment of the 2x stop fingers, from the front (Z axes) - manual adjustment of the die displacement, from the front (I axis) - WILA manual table crowning, including analog value display - TRUMPF hydraulic upper tool clamp - TRUMPF manual lower tool clamp - 1x freely movable 2 hand / foot control - Safety device at the rear (sliding door) - Safety device at the side (swinging door) - Original operating instructions + CE declaration + circuit diagram Iodpfxoxabqbs Aqpstg

Condition: used, Year of construction: 1997, pressure 130 t chamfer lenght 3060 mm distance between columns 2690 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec table width 120 mm table height 1050 mm tiltable up to +/- 10.0 mm Number of working hours ca. 31.800 h compressed air 5.0 - 7.0 bar oil volume 250 l operating pressure 340 bar voltage 400 V total power requirement 23.0 KVA weight of the machine ca. 12950 kg range L-W-H 3660 x 2310 x 2900 mm Machine in a well-maintained condition (!!) with only approx. 31.800 operating hours - in checked condition - machine video - ?v=PBV-MDtZnlE Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model DA 65 * swiveling control panel, front left * 2D graphic programming & product display * Tool & program library * USB keyboard and mouse interface - CNC controlled axes: Y1 + Y2 / X1 + X2 / R1 + R2 / Z1 + Z2 / I axis - CNC controlled back stop (X1 + X2 axis) - CNC controlled height adjustment of the back stop (R1 + R2 axis) - CNC controlled adjustment of the stop fingers (Z1 + Z2 axis) - CNC controlled, pneumatic die displacement (I axis) - CNC WILA electro-motoric table crowning - TRUMPF hydraulic upper tool clamping - TRUMPF manuel Lower tool clamp - 1x freely movable 2-hand / foot control - Safety device at the rear (sliding door) Iedsxacfmspfx Aqpetg - Safety device at the side (swinging door) - Original operating instructions + spare parts list

Year of construction: 2007, condition: ready for operation (used), A Beyeler press brake, today Bystronic, is available. Working length: 4100mm, press force: 2250kN, max. stroke: 400mm, throat depth: 250mm, installation height: 917mm, rapid traverse down/up: 150mm/s, working speed: 10mm/s, hydraulic pressure: 315bar, oil volume: 815l, max. oil temperature: 65°C, power: 30kW, max. upper tool weight: 400kg, max. workpiece weight: 13kg. Machine dimensions X/Y/Z: approx. 5500mm/2300mm/3350mm, weight: approx. 22000kg, operating hours: approx. 35000h. Including numerous upper tools, blades and lower tools. Documentation available. On-site inspection is possible. Itedpfxox U Dwpe Aqpog

Condition: excellent (used), Year of construction: 1999, Technical Data: Working length: 3050 mm Distance between uprights: 2690 mm Pressing force: 130 t CNC control: DELEM Adjustable backgauge Controlled axes: Z1 / Z2; X; R Ijdpfxsw Tcncj Aqpotg CNC-controlled crowning Installation height: 535 mm Stroke: 365 mm Throat depth: 410 mm Hydraulic tool clamping top and bottom Ram position measuring system with spring-back compensation via glass scales Program-controlled lower tool shifting (I-axis) for 2 positions Motor power: 12.5 kW Number of backgauge fingers: 2 CE mark Dimensions (L x W x H): approx. 3800 x 2350 x 3150 mm Weight: approx. 14 tonnes Condition: Good condition The seller is not liable for typing or data transmission errors. The machine's appearance, technical condition and wear correspond to its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 1997, machine/vehicle number: 885258, Offer 25514 Technical Data: - Max. working length: 3060 mm - Frame opening: 2690 mm - Max. pressing force: 1300 kN - Max. distance table/ram: 535 mm - Throat depth: 410 mm - Ram stroke: 215 mm - Stroke speeds: - Downward idle speed: max. 200 mm/sec - Upward speed: 135 mm/sec - Pressing speed (downward): 1 to 11 mm/sec - Total drive power: 18 kW - Pneumatic connection: 6 bar - Required space: approx. W 3800 x H 2700 x D 2400 mm - Weight: approx. 11,500 kg Features: - 6-axis CNC control system DELEM - Two-hand control panel with foot pedal Ijdpfsx Ew Dqsx Aqpstg - Crowning system - CNC-controlled backgauge with height adjustment 5 - 860 mm - Hydraulic upper and lower tool clamping - Pneumatically assisted die table shifting

Year of construction: 2004, condition: ready for operation (used), - USED - 8-AXIS SYNCHRONIZED CNC PRESS BRAKE WITH HYDRAULIC CROWNING AXIS: Y1 - Y2 - X1 - X2 - R1 - R2 - Z1 - Z2 BENDING LENGTH: 3100 mm TONNAGE: 150 ton THROAT DEPTH: 400 mm DISTANCE BETWEEN UPRIGHTS: 2750 mm OPEN HEIGHT: 500 mm UPPER BEAM TRAVEL: 215 mm APPROACH SPEED: 200 mm/sec RETURN SPEED: 150 mm/sec WORKING SPEED: 1-10 mm/sec MOTOR POWER: 11 kW CONTROL UNIT: CYBELEC ModEva 10S WEIGHT: 10000 Kg Isdowqibrspfx Aqpetg OVERALL DIMENSIONS: 4100 x 2050 x 2600 mm

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 885669, functionality: fully functional, stroke length: 365 mm, throat depth: 410 mm, clearance between the columns: 2,800 mm, working width: 3,050 mm, bending force (max.): 130 t, TECHNICAL DETAILS Pressing force: 130.0 t Working area Working width: max. 3,050 mm Max. stroke: 365 mm Throat depth: 410 mm Distance between columns: 2,800 mm Isdpfjw Dqckex Aqpetg Number of axes: 6 Control Control: CNC Control type: Delem DA65 Controlled axes: Y1-Y2 + X-R-Z1-Z2 + I + crowning MACHINE DETAILS Dimensions and Weight Overall length: 3,500 mm Overall width: 2,200 mm Overall height: 2,400 mm Weight: 11,000 kg EQUIPMENT WILA hydraulic clamping Angle measurement system Documentation CE marking