Steam turbine

Turboden 10HR Split ORC Turbogenerator

Condition: used, turning diameter over bed 2400 mm turning diameter over slide rest 2200 mm turning length 10000 mm power capacity 185 kW faceplate diameter 1650 mm turning speeds 1,5 -150 U/min max. workpiece weight 70000 kg Gsdpfx Ahexddvne Hsbg clamping diameter 1400 mm Technical data Working range Maximum turning diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in the headstock faceplate: 300 - 1,600 mm with special jaws up to 2,050 mm Clamping diameter in the tailstock faceplate: 300 - 1,400 mm Maximum workpiece weight: 70000 kg Main drive, faceplate Faceplate diameter: 2000 mm Faceplate speeds, continuously adjustable in 4 stages: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Drive power of main motor: 185 kW Flange centre point angle: 70° Supports Travel of the plunge slide: 500 mm Travel of the face slide: 1400 mm Quick adjustment, longitudinal: 2000 mm/min Quick adjustment, face: 800 mm/min Infinitely variable feed, longitudinal: 0.6 - 300 mm/min Infinitely variable feed, face: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange centre point angle: 70° Quick adjustment: 1250 mm/min Special equipment Copying device for first support Copying length 8500 mm Max. copying depth in one pass 500 mm Boring device: Boring bar 460 x 390 mm Drilling diameter 600 - 1000 mm Maximum drilling depth in one pass 2700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at a projection of 1000 mm Reduced chip cross-section with increasing drilling depth A guide ruler for cone turning, adjustment angle up to 8° and a maximum cone length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide ruler for cone turning, adjustment angle up to 15° and a maximum cone length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle box.

Condition: new, Year of construction: 2025, total width: 10,000 mm, total height: 2,700 mm, working range: 2,500 mm, total length: 10,000 mm, compressed air connection: 10 bar, type of input current: three-phase, warranty duration: 12 months, overall weight: 4 kg, input current: 18 A, working width: 1,700 mm, working height: 180 mm, feed length X-axis: 2,500 mm, feed length Y-axis: 1,700 mm, power: 11 kW (14.96 HP), 1 Operator pallet production equipment is designed to produce standard and non-standard pallets up to 2500 mm long. The boards are loaded into the pallet template manually. Pallets are easily programmed and saved in the Windows operating system. Automatic pallet unloading make the operator's work easier, there is no need to unload pallets manually. After setting the number of pallets to be loaded, the ABB Robot will unload the pallets automatically. Godpfx Ajwm Ihcjh Hebg Installation capacity per 1 shift: 300 – 500 pallets.

Condition: used, Year of construction: 2018, System: Decanter Type: Flottweg C4E-4/454 Complete dewatering system in container Year of construction: 2018 Sludge throughput: approx. 0-40m3/h Solids capacity: max. 1.2 TS/h Equipment: front double door, side entrance door, fan heater, lighting, sockets, etc. Rotor: max. speed 3650 min-1 Drum diameter: 470 mm System: Container system Interchangeable bridge system for accommodating the downstream system components. Piped and wired ready for operation as a functioning unit. Container system design: Stand construction, clad with sandwich panels and holders for transportation with interchangeable bridge systems. Accessories: FHM preparation station PolyMix 4000SP, measuring equipment, switchgear Feed pump: Seepex BN 52-6LS Discharge conveyor: SS D320 double trough spiral conveyor Dimensions: L 7820mm x W 2500 mm x H 3880 mm Empty weight: 14500 kg Weight in operation: 15000kg Voltage: 400V Power consumption: 142 A Power consumption max.: 70kW Fuse protection: 250 A Frequency: 50 Hz Gbodpfx Asu R Icmsh Hsg Sludge inlet: DN 100 Centrate drain: DN200 Solids discharge: Spiral conveyor Further information: see photos

Condition: excellent (used), Heating boiler Loos UT 5200Kw.incl.oil burner Gbedpfx Aemn Hpyoh Hjg

Year of construction: 1990, condition: good (used), machine/vehicle number: 92041, table mounting size: 410 x 900 mm movements x/y/z: 560/410/380 mm spindle taper: SK 40 spindle turning speed range: 22 - 6000 rpm carriages: x/z until 10000, y until 240 mm/min space needed: 2600 x 2000 x 2300 mm Gbjdpfx Ahjdhhpro Hsg weight: 3500 kg

Year of construction: 2020, condition: refurbished (used), LINCK CSM 120/6 Gbodpfx Ajvtc D Toh Heg 5 STILLIG WARIABEL GENERALLY OVERHAULD AFTER OVERHAUL MACHINE STILL 2+132 KW 6 MOVING SAWS HIGH PERFORMANCE MACHINE NEW FAULT UNDER POWER OPPORTUNITY MORE INFO, PICTURES BY E-MAIL..

Condition: new, with planing spindle Type R-R-RP1300 Working width 1300 mm Min. working length 538 mm Working thickness 3-110 mm Feeding speed 6-30 m/min Total motor power 77,12 kW Gbodped H Sc Eefx Ah Heg Motor for first unit 22 kW Motor for second unit 30 kW Motor for third unit 18,5 kW Abrasive belt size 1330x2200 mm Working air pressure 0,55mpa Volume of dust collection device 12000 m3/h Transport dimensions 3090x2020x2260 mm Weight 4700 kg

Condition: excellent (used), Year of construction: 2006, Vecoplan VAZ 1300 shredder Hopper inlet 2.26 m x 1.65 m Gbedowu Nwhopfx Ah Hjg

Condition: good (used), functionality: fully functional, Complete plywood manufacturing line including: 1 BUERKLE compounding line year 1991 with BUERKLE roller gluer length 3400 mm + 1 OLM long-wire sender + 1 OLM cross-wire sender + 1 assembly table. 1 press loading basket with 10 positions. 1 BVH 10-stage press with thermal oil heating platens. - Platen size: 3700 x 1900 - Platen thickness: 40 mm - Opening between platens: 75mm - 1 central cylinder D700 mm, max. hydraulic pressure 315 Kg/cm². Gedpfx Ahjul Uizs Hjbg 1 press unloading basket with lateral evacuation pushers on lifting table. Line currently in operation, available second half of 2025.

Condition: new, Year of construction: 2010, Make Voith Model: RWW11 E5 Windrive planetary gear Year of manufacturing: 2010, Unused Dimensions LxWxH (mm) 2400 x 1450 x 1700 Weight (kg) ca 6900 Total quantity in stock 3 Country of origin Germany Comments Unused mindmill planetary gear, 3400 Kw power supply needed, n1: 476 rpm / n2: 1500 rpm Gjdpfx Ahotub Dzj Hebg