Chuck flange

unbekannt Ø 200 mm

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck, face turning chuck Prodpfx Aboxuflfj Ijd -Faceplate: Chuck size Ø 200 mm -Mount: Short cone 4 / Cone Ø 61-63 mm Short cone flange with camlock fastening -Bolt circle: Ø 82 mm -Through hole: Ø 41 mm -Dimensions: Ø 200 x 125 mm -Weight: 9.5 kg

Condition: used, Unused methane fed 1025 kW Caterpillar 3516 STD generator set made in 1993 with only 12 hours of use in factory tests. Rated 1025kW, 1281 kVA, 1500 RPM, 50 Hz. Psdpfxow U A Hzj Ab Ijrd

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 200 mm -Bolt circle: Ø134 mm -Hole: short cone 6, cone Ø 101 - 106 mm -Dimensions total Ø 200 x 145 mm Pjdpfxoxrk T Nj Ab Isrd -Weight: 7.6 kg

Condition: good (used), Four-jaw chuck, 4-jaw chuck -Four-jaw chuck: chuck size Ø 200 mm -Passage: Ø 60 mm -Bolt circle: Ø 175 mm -Weight: 13.8kg Predpfxjmxpvbj Ab Iod

Condition: used, Hydraulic scissor lift table GRUSE type ELS 0.5-8-1-G-SO Make No.: 124984 Year of construction 2017 lifting capacity 300 kg platform size 1250 x 800 mm Prsdpfx Absixq Hnj Ied useful stroke max. 785 mm Overall height - table bottom 345 mm Overall height - table top 1130 mm Motor power 0,8 kW Mains connection 400 Volt, 50 Hz - foot switch for up and down, with emergency stop and key switch for control on - single shear with one lifting cylinder - revolving safety contact strip with limit switches under the upper frame - adjustable limit switch for the upper lifting restriction - Table top with sturdy wooden worktop and airliner rails with lashing eyes - hydraulic power unit with tank mounted under the table - feet under the table corners, mobile with lift truck own weight 250 kg very good condition, almost as new

Condition: good (used), Heavy-duty castors, heavy-duty wheels, tires, tires with rims, heavy-duty tires, forklift tires -Heavy-duty castors: 4 pieces, from electric forklift -Tires: Ø 200 x 80 mm -Hub: Ø 65 x 45 mm / Dimensions see photos -Shipping/Price: complete -Dimensions each: Ø 200 x 170 mm Pedsxbyltepfx Ab Ierd -Weight: 10.5 kg/piece

Condition: used, Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm Prsdsd I Ucyjpfx Ab Iod -Throughout: Ø 60 mm -Weight: 14.5 kg

Condition: used, Drilling machine, column drilling machine, pillar drilling machine, pillar drilling machine, multi-spindle head, multi-spindle drilling head, drilling gear -with two-spindle drilling head Manufacturer Sigloch Schrieder Type: V602 -Drive power: 1.02/0.88 kW Pedpfxsc Rpnne Ab Isrd -Drill distance adjustable: 18-110 mm -Max. Drill: 2x Ø 6 mm -Table size: 275 mm -Spindle mount: MK3 -Projection: 220 mm -Speeds: 100-2900 rpm -Columns: Ø 100 mm -Spindle stroke: 75 mm -Transmission -Dimensions: 900/400/H1910 mm -Weight: 230kg

Condition: good (used), 4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck Predpfev Uwqkox Ab Ijd -Power chuck: chuck size Ø 200 mm -Type: LK 200 A72-2163-132 -Thread: M20 -Bolt circle: Ø 140 x 17 mm -Jaw width: 23 mm -Passage: Ø 32 mm -Dimensions: Ø 200 x 170 mm -Weight: 18.8 kg

Condition: used, Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 200 mm Podpfxsd N Uy To Ab Ierd -Hole circle: Ø 132/M16 -Price: per piece -Number: 3 pieces -Dimensions: Ø 200/H51 mm -Weight: 7.9 kg

Condition: used, Year of construction: 2011, operating hours: 24,300 h, Equipment: all wheel drive, German Machine Technical Specifications – Caterpillar 988H (approx. 2012) Below is a comprehensive overview of the key specifications: Engine & Performance Predpfx Aboxar Hyo Isd * Engine model: Cat C18 ACERT, 6-cylinder, turbocharged * Displacement: approx. 1104.5 cu in (18.1 l) * Rated power (net): 501 hp (374 kW) according to ISO 9249 or EEC 80/1269 * Gross power: approx. 555 hp (414 kW) * Additional info: ISO 14396 Net: 540 hp; ISO 3046-2 Gross: 520 hp Weight & Capacities * Operating weight: approx. 128,328 lb (58,209 kg) * Rated payload: approx. 27,558 lb (12,500 kg) * Maximum bucket capacity: approx. 10 yd³ (8 m³) heaped; 8 yd³ (6 m³) struck; 6.9 yd³ (5.3 m³) Dimensions & Volumes * Length with bucket on ground: approx. 40.08 ft (12.2 m) * Width over tires: approx. 11.75 ft (3.58 m) * Cab height: approx. 13.42 ft (4.13 m) * Maximum hinge pin height: approx. 19.18 ft (5.85 m) * Clearance at full lift: approx. 6.66 ft (2 m) * Ground clearance: approx. 1.67 ft (0.55 m)

Condition: used, Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 200 mm Prsded Rakrepfx Ab Ijd -Hole circle: Ø 120/Ø 12 mm -Dimensions: Ø 200/H37 mm -Weight: 7.5 kg

Condition: used, Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 200/142 mm -Height: 20 mm Pedped Ta Nyjfx Ab Isrd -Hole circle: Ø 171/7 mm -Delivery of: steel/stainless steel cover plates possible -Number: 192x pillows available -Price: per piece -Weight: 0.3 kg/piece

Condition: used, Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: milling machine table -Table surface: 600 x 220 mm -Y-axis: 130 mm movable, hand crank with fine adjustment, see photos -T grooves: groove width 12 mm, groove spacing 45 mm Prsdpfxeqddi Uj Ab Ijd -Total dimensions: 690/490/H300 mm -Weight: 72 kg

Condition: used, Chuck flange, flange mount, lathe chuck flange, driving flange Prodpfsd Rakhex Ab Iod -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 200 mm -Hole circle: Ø 176/Ø 11 mm -Hole circle: Ø 114/4 x M10 -Dimensions: Ø 200/H20 mm -Weight: 3.4 kg