Container turning device 60 ton

unbekannt Achsmaß 1920 mm

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg Ihsdpfeqt Dmyex Adwst - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Year of construction: 2021, condition: new, Complete solution for the transport of bulk materials and demetalization of magnetic metal contaminants. Ihodpehh A Iyefx Adwjt Aluminum ascending conveyor belt including substructure Incline start area level ground (adjustable) Discharge height 1800mm (adjustable) Construction: height adjustable Construction for suspending the overband magnetic separator DMPM1200 included Conveyor belt width 500mm (adjustable) We deliver our conveyor belts in PVC, PU or rubber. PVC conveyor belt including carrier and corrugated edge Drive: Motor 0.25KW (adjustable), speed 0.3m / sec Connection 220 / 240V, 50Hz, protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Wave edge: 40x35mm T-20 studs - 400mm pitch 2-ply particularly cross-stable Our core competence lies in delivering exactly what the customer really needs. We work together with our customers to develop customer-specific, individual solutions and deliver corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyors, magnetic separators, overbelt magnetic separators, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnets, magnetic belt separators, lifting magnets, filter rods, magnetic grids, magnetic grids, metal separators, block magnets, filter systems

Year of construction: 2009, condition: good (used), Load capacity: 30 t Ihjdeqiz N Repfx Adwst Fine lift Lifting height 9 meters

Condition: good (used), functionality: fully functional, Equipment: type plate available, 100,000 liter tank, used, double-walled, good condition, ready for immediate use, cleaned - certificate from specialist company available Length: 15.74 m Diameter: 2.90 m Height: 3.10 m - Transport height - Access ladder - Platform with railing - Firmly welded saddle feet Ihsdpfx Ajuzvyuedwot - Ventilation - Limit value transmitter - Dipstick - leak detector Loading and transportation can be offered. Only serious and serious inquiries will be answered: Name, e-mail address and telephone number.

Condition: new, table diameter 2500 mm table load 20,0 t swivelling range 0 - 135 Grad turning speeds 0,04 - 0,4 U/min max. torque on the faceplate 40000 Nm table pass 200 mm welding current 1000 Ampere total power requirement 5,5 + 11,0 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. Iodpsfv Axmjfx Adwsht • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, functionality: fully functional, machine/vehicle number: 0684, maximum load weight: 40,000 kg, overall weight: 44,500 kg, loading space length: 4,000 mm, loading space width: 2,200 mm, loading space height: 780 mm, tire size: 405x260, tire condition: 100 %, Year of construction: 2025, Transport Cart TPW 40 AL-PA-AW Type: TPW 40 AL-PA-AW Serial No.: 0684 Year of manufacture: 2025 Payload: 40,000 kg on 60% of the loading area at 6 km/h Dimensions: Loading area length: 4000 mm Width: 2200 mm Height: approx. 760 mm Steering: All-wheel steering with oscillating axle and axle rocker Ihjdpfx Aofxgxnjdwjt Tyres: 16 heavy-duty wheels 405-260 Towing drawbar: Drawbar length 1800 mm with safety latch and towing eye according to DIN for 40 mm pin Paint finish: RAL 2000 Transport floor: 50 mm Douglas fir/larch, countersunk and bolted into the frame #HeavyDutyTransport #In-plantTransportSystems #HeavyDutyTrailer6-100Ton #HeavyDutyTrailer3to100Ton #HeavyDutyTransportPlatformCart #PlatformHeavyDutyTrailer #AllWheelSteering #TransportCart

Year of construction: 2026, condition: new, To sieve dry material: like flour-, grainy-, and granule-shaped material. Sizes from: wide 500-1500mm / length 1200-2400mm Iodpfx Adschb Ryowjht Sieve layers: 2 - 4 layers, granulation 0,1-18mm freely selectable.

Year of construction: 2007, condition: ready for operation (used), Working diameter: 1500-6000mm, working length: 1200-3000mm, wall thickness: 20-70mm. Ihedpfjnvfduox Adwst

Condition: good (used), Year of construction: 2015, Metal cutting Tooling TOS - HUR 50 MACH-ID 2923 Make: TOS Ihodjwvht Repfx Adwot Type: HUR 50 Year: 2015

Condition: good (used), Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dollies, roll/cargo trailers, roll trailers, cargo trailers -Heavy-duty transport wagon: industrial trailer -Platform: 17470/2545/H850 mm -Load capacity: approx. 85 t Iedpfel Ab D Hjx Adwoht -Tires: Solid rubber -Quantity: 1 piece available -Empty weight: 8000 kg