Roller conveyor 2.49 m

unbekannt Rollenbreite 1160 mm

Condition: used, Year of construction: 2005, - Fagor 8055 CNC control - Additional tank for internal spindle cooling (15 bar) 400 liters - Year of construction 2005 Technical data: - Travel X/Y/Z: 610 / 455 / 520 mm - Rapid traverse: 24 m/min - Working spindle speed: 8000 rpm - Tool holder: BT40 Ndodstvf Htspfx Aiysa - Table size: 762 x 363 mm - Maximum table load: 350 kg - Motor power: 18 kW - Operating voltage: 400 V - Weight: 3140 kg

Condition: good (used), Year of construction: 2000, functionality: fully functional, CNC lathe, HITACHI SEIKI, type HT 23-RIII, year 2000 SEICOS L MULTI DIALOG control system. Maximum turning diameter: 450 mm Maximum turning length: 630 mm Tool turret with 12 positions VDI 40 Chuck diameter: 250 mm Spindle bore: 78 mm Spindle speeds: 30-4000 rpm Rapid traverse: X and Z 30 m/min Chip conveyor. For further information, see data sheets. The machine is in good condition and can be demonstrated under power. Njdev T Un Depfx Aiyeda Machine documentation is available.

Condition: used, table length 400 mm table width 300 mm x-travel 300 mm y-travel 250 mm z-travel 250 mm Ndodpfx Aovwgq Soiyoa weight of the machine ca. 1,2 t dimensions of the machine ca. 2000 x 1200 x 2500 mm The machine is supplied with a wide range of accessories

Condition: ready for operation (used), functionality: fully functional, mileage: 27,600 km, power: 735.5 kW (1,000.00 HP), first registration: 06/2008, fuel type: diesel, overall weight: 32,000 kg, axle configuration: 8x8, next inspection (TÜV): 03/2027, fuel: diesel, color: red, gearing type: automatic, emission class: euro3, total length: 12,300 mm, total width: 3,000 mm, total height: 4,000 mm, Year of construction: 2008, operating hours: 600 h, Equipment: air conditioning, parking heater, trailer coupling, Airport fire engine ready for operation – TÜV valid until 03-2027 Ndsdpfxsx Rdyvo Aiyoa PANTHER Rosenbauer on a MAN chassis, with a 1000 hp engine and an Allison 6-speed torque converter transmission. In excellent condition – Rosenbauer maintenance performed.

Condition: excellent (used), bore depth 500 mm Ndsdpfjxx A D Tex Aiyja spindle speed: 1

Year of construction: 2006, condition: good (used), 5-axis vertical machining center fully equipped with direct-drive technology. Ndedpspkyn Rofx Aiyja Machine equipped with 30,000 rpm spindle, 60-place tool magazine and Heidenhain TNC 530 CNC

Condition: excellent (used), Year of construction: 2008, CNC Lathe with c-axis MAZAK - QUICKTURN NEXUS 250-IIM MACH-ID 9490 Make: MAZAK Type: QUICKTURN NEXUS 250-IIM Control: Mazatrol Matrix Nexus Year: 2008 Nsdpfx Ajyz Stljiyoda Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2000, High-performance CNC vertical machining center with SIEMENS 840 D, dual pallet changer, internal coolant system, linear guides, and 30-tool automatic tool changer. Table size: 2 x 1000 x 450 mm Tool holder DIN 69871: ISO 40 Travel ranges: X-axis: 1100 mm Y-axis: 500 mm Z-axis: 640 mm Spindle speed range: 50 – 10,000 rpm Table load: 600 kg Feed rate range, X/Y/Z, stepless: -10,000 mm/min Rapid traverse in all axes: 30 m/min Drive power: 18.5 kW Machine dimensions L x W x H: approx. 3605 x 3041 x 3220 mm Weight: approx. 6700 kg Accessories / Special features: • CNC control system SIEMENS 840 D • Dual pallet changer • 30-tool automatic tool changer • Full enclosure with safety doors, electrically secured • High spindle speed up to 10,000 rpm and drive power of 18.5 kW • Linear guides with double roller recirculating bearing, allowing high torques to be absorbed evenly in all directions • Ball screws in all 3 axes • The entire machine bed is made of Meehanite cast iron, ensuring precision, rigidity, and vibration damping • Tool holder DIN 69871, ISO 40 • Chip conveyor with integrated coolant system • 4th axis pre-configured • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel Nsdpfx Ajd I R E Njiyeda

Condition: like new (used), All parts are for sale, complet. Ndedpfohi Tvbjx Aiyoa

Condition: good (used), Tailstock Taper size: MK 2 Njdpfjdlp Txox Aiyeda Quill travel: 30 mm Height-adjustable Center height of 250 - 285 mm Tiltable from -5 degrees to +15 degrees Base area: 230 x 155 mm Weight: 27 kg