Shelving for Pallets

unbekannt unbekannt

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 3700/116 rpm -Power: 0.18 kW 24 V. Gsdpfxod I Hixo Al Asud -Diameter shaft: 17 mm -Length: 45 mm -Weight: 6 kg -Dimensions: 215/170/H420 mm -Weight: 17.3 kg/piece

Condition: new, Year of construction: 2026, Drilling and milling machine Kudu with CNC control and tool changer (3-axis) drilling and milling machine with movable processing unit - the table remains stationary, the drill head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The data can be transferred to the machine control using the file formats DXF./DWG. be carried out via a programming station. Alternatively, the system can also be programmed directly on the machine control. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Stable machine base • Drilling head speed: up to 2500 rpm (standard version), is supplied with the right speed for your application. Gjdofu Ivzepfx Al Aoud • Tool holder: SK 40 • Drive of the X, Y and Z-axes via servomotors • Rapid traverse in the X-axis: 20 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance from upper edge of table to lower edge of tool holder 400 mm • Table width 480 mm • Working height: 1050 mm • Drilling diameter: 3 to 30 mm in St. 50 (depending on the tool) • Tapping: M4 - M30 (with compensating chuck) • Machining path in the Y axis: 300 mm • Tolerance in the X axis: + - 0.1 mm • Tolerance in the Y-axis: 0.06 mm • Tolerance in the Z-axis: 0.06 mm • Drill head drive motor: 5.5 kW • System weight: 2300 kg • System dimensions: 8050 mm x 3000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Control touch screen panel 21.5", reinforced front glass • Easy programming on the Machine • Milling of long holes and circles • Lubrication takes place using a minimum quantity spray system • without material vices • Remote maintenance possible using Teamviewer (LAN interface) • Tool memory for drilling tools, with dimensions, speed • Simulation of work processes • Digital hand wheel Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming & operation • Minimum quantity spray system (standard) • Programming errors are prevented by CAD /CAM excluded

Condition: used, Gearboxes, pinion gears, angular gears, transmission gears -Translation: 41:1 -Drive shaft: Ø 18 x 25 mm -Hollow shaft: Ø 40 x 130 mm -Price: per piece Gedpfx Ajd Rzc Esl Ajud -Number: 2 pieces -Dimensions: 300/150/H260 mm -Weight: 12.5 kg/piece

Year of construction: 1975, condition: used, functionality: fully functional, We are offering this used, unidentified pastry forming machine, manufactured in 1975, for sale. Manufacturer: Model: Year of manufacture: 1975 Condition: used Category ID: 9 Machine type: Pastry forming machine Godpjzh N A Iefx Al Aoud In addition, 5-6 trolleys including matching trays for the pastry forming machine are included. Furthermore, there are 6 different rollers in excellent condition. The machine is very old, but as you can see in the video, it runs perfectly. It is ideal for a small bakery that wants to produce some excellent baked goods very efficiently. If you have any questions or need more information, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 205 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 560 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 828D, number of axes: 4, This 4-axis DOOSAN LYNX 2100 LSY was manufactured in 2019. It features a Y-axis for multi-tasking operations, a 12-station turret with live tooling, and a hydraulic 3-jaw chuck. The machine is equipped with a bar feeder system, allowing for efficient serial production. If you are looking to get high-quality turning and milling capabilities, consider the DOOSAN LYNX 2100 LSY turn-mill centre we have for sale. Contact us for further details. Gsdpfx Alsy Epi As Aoud • Main features: • Main spindle + sub-spindle • Y-axis for multi-tasking operations • 12-station turret (24 indexing positions) • Live tooling (driven tools) • Tool interface: BMT45 • Workholding/Capacity (on machine): • Hydraulic 3-jaw chuck: 170 mm • Key advantages: • Y-axis + sub-spindle → full machining capability • Live tooling → turning and milling in one setup • Bar feeder → ideal for serial production • Automated part handling → increased productivity Additional equipment • Bar feeder: Top Automazioni Fusion 350 (Ø20–50 mm, up to 3200 mm length) • Additional 3-jaw chuck: 135 mm • Collet system, capacity 5–65 mm • Chip conveyor (belt type, side discharge) • Parts catcher for sub-spindle • Oil skimmer • High-pressure coolant system (5–7 bar, 20 µm filtration) • Automatic tool measurement • Spindle and axis load monitoring system • 3-color signal light • Parts handling arm (for sub-spindle unloading) • Tooling package: • 2x straight driven tool holders • 2x angular driven tool holders • 1x extended angular holder • 1x set of turning tool holders Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, 24 pieces available Gjdpodc A Rpofx Al Aoud

Condition: used, Technical details: band width: 135 mm conveying height: 1020 control voltage: 380 V weight of the machine approx.: 165 kg dimension machine xH: 3,3 x 0,5 x 1,5 m Scraper belt conveyor made of sheet steel construction Further technical details: Gjdpfxju Nuque Al Ajud -profile height (B1) 160mm -Profile width (F) 300mm -Chip inlet width (F1) 160mm -Chip length (A) 1700mm -Bottom clearance (I) 20mm -Discharge length (D) 200mm -Discharge height above floor (C) 1020mm -Discharge width 200mm -Insertion length/underfeed length (A) approx. 2000mm -Insertion height (B) 180mm Operation via manual switch Rotating scraper brushes at the discharge and on the left/right side of the infeed beam *

Condition: new, Year of construction: 2022, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 15 m/min, overall weight: 7,400 kg, spindle speed (min.): 4,000 rpm, spindle speed (max.): 10 rpm, travel distance Y-axis: 1,500 mm, power: 22 kW (29.91 HP), DYAS Plate Drilling Center - DYAS PDC-1500 Gujdpfx Asgbfaxjl Aod Number of Drilling Units 1 Vertical Motor Power 22 kW Spindle Torque 280 Nm Spindle Speed 10-4000 RPM Automatic Tool Changing (ATC) 16 Units Maximum material weight 760 kg Max. Max. Drilling Capacity (mm) Ø40 mm

Condition: used, Technical details: table load: 3 t table diameter: 1280 mm Guedpfx Alexz E Exs Ajd table rotating: 0-180 Grad table - inclinable: nein / no Grad machine weight approx.: 1,376 kg dimensions LxWxH: 1,4 x 1,7 x 0,18 m positioning rotary table Load capacity tested up to 3 tons. Currently operates in 2 positions at 180 degrees. Can be modified up to a maximum of 270°. *

Condition: used, I am offering a sand processing plant for sale, sourced from a company liquidation. Includes control system. The machine is currently still connected and was operational until the company closed. For self-dismantling. Additional photos and details, as well as a viewing appointment, are available upon request. Please feel free to contact me with your price offer. For self-dismantling. Dismantling can be arranged for an additional fee. Guodpfjzb Ef Hjx Al Ajd Sale is ONLY to businesses. An invoice with VAT will be issued. Sold without warranty or guarantee.

Condition: good (used), Year of construction: 2017, conveyor belt length: 7,100 mm, conveyor belt width: 2,500 mm, Double steering Gjdpfewq N Sdsx Al Asud Wheel diameter Platform size 7100 x 2500 mm Inspection valid 11.2025 Length:7100mm Width:2500mm Height:900mm

Condition: good (used), functionality: fully functional, Gitterbox emptying, pneumatic, for gitterboxes 1200 x 800 mm Dimensions: 2200 x 1700 x 2250 mm (LxWxH) Weight approx. 1500 kg Guedpfjv Nhk Dex Al Aod Note: The machine is in good condition. It was checked and tested by us in 28816 Stuhr. You can find the video above in the pictures, or on our website or our YouTube channel. Inspections, even under power, are possible at any time by arrangement. Video calls are possible on request. We are happy to answer questions about the machine by phone from Monday to Thursday from 8 a.m. to 2 p.m. On Friday we are there for you from 8 a.m. to 1 p.m. Please note: All technical data refers to information provided by the manufacturer. We accept no liability for the information provided or any errors. The offers are non-binding, subject to prior sale and can be revoked at any time. Viewings are possible by arrangement. The sale takes place ex location, without warranty or guarantee. Our payment terms are 100% advance payment.

Condition: good (used), Approx. 24 table trolleys – used – : Unit price ex location: €69 (net, excluding VAT)! Minimum purchase: 3 units = 1 pallet Gujdpfsw Db Scsx Al Aed Manufacturer: unknown (to be provided) Model: unknown (to be provided) Year of manufacture: unknown (to be provided) Dimensions: unknown (to be provided) Width estimated at 40–50 cm, length estimated at 0.70 m Load capacity: unknown (to be provided) Condition: good – very good Available: immediately Location: Rhine/Main area, later warehouse in Frankenberg / Saxony

Condition: excellent (used), Year of construction: 2007, STAR ECAS 12 CNC Swiss-type lathe TECHNICAL DATA Gujdpowf Aclefx Al Aed Maximum machining diameter: 13mm Max. headstock stroke: 205 mm Maximum drilling capability: Stationary tool: 10 mm Power driven tool: 8 mm Maximum tapping capability: Stationary tool: M8 x P 1.25 Power driven tool: M6 X P1.0 Maximum milling capability: 10mm Maximum die cutting capability: M8 x P1.25 Maximum slotting capability: 1.5 x 4 mm Feed rate: Z1, X1, Y1, Z2, X2, Z3, X3, Y3: 18,000 mm/min C1, C2: 194,400°/min Maximum turning feed rate: Z1, X1, Y1, Z2, X2, Z3, X3, Y3: 18,000 mm/min C1, C2: 194,400°/min Minimum input increment: X1, X2, X3: 0.001 mm Z1, Z2, Z3, Y1, Y3: 0.001 mm C1, C2: 0.001° Spindle speed: 12,000 rpm Indexing angle: 0.01° Dimensions: 2588 x 1150 x 1765 mm Center height: 1040 mm Weight: 3500 kg SCOPE OF OFFER INCLUDES (list not exhaustive): Star Ecas 12 CNC lathe Coolant tank / pump High-pressure system Transformer Operating documentation Exact scope of offer as shown in the photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information.

Condition: good (used), Approx. 14 order picking trolleys with compartment dividers – used - : Gedpfx Alex Dk Dxo Ajud Price per unit: €195 (net), ex location! Minimum purchase: 5 units! Type 2 Manufacturer: unknown Model: unknown Year of manufacture: unknown Height: 237 cm Length: 233 cm Width: 74 cm Condition: good Available: immediately Location: Euskirchen