Chipper with horizontal feed

Vecoplan 350

Condition: excellent (used), Vecoplan 350/140 Chipper / Shredder Catalogue No. 7742 TECHNICAL DATA - Infeed width: 350 mm - Infeed height: 140 mm - Shaft width: 345 mm - Shaft diameter: 290 mm - Number of knives: 2 pcs - Screen size: 55x55 mm - Toothed feed shaft from above and below - Shaft motors: 2×1.5 kW - Electric auto-reverse (adjustable) - With vibrating chute - Vibrating chute length/width: 3750×355 mm - Full vibrating chute dimensions: 3750x620x1210 mm - Discharge with conveyor belt: 2970x340 mm - Conveyor belt dimensions: 3000x630x750 mm - Main motor: 22 kW - Dimensions (L/W/H): 3000x1100x1500 mm - Weight: approx. 2500 kg Kjdpfx Adoxcx S Iowoll ADVANTAGES – German-made – with vibrating chute – With discharge conveyor – Auto-reverse – Used chipper, in very good condition Net price: 47,900 PLN Net price: 11,400 EUR depending on the exchange rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Double edger and trim circular saw with electronic control, consisting of: RET alignment and infeed table. Chain bed in front of the machine with liftable and lowerable pressure roller. Laser unit. DK 90 L 1000: Passage width 1000 mm. Cutting height 125 mm. Feed speed frequency-controlled up to 100 m/min. Automatic roller height adjustment with roller pressure. Width adjustment hydraulically, electronic positioning control with the following setting options: Continuously variable, cm indexing, and switchable to 2 cm indexing. Cutting width between flanges 24 - 440 mm. 10 adjustable fixed dimensions, direct input in mm. Constant dimension allowance, shrinkage allowance (percentage). Splitter wedge pair: 1 x zero line, 1 x independently hydraulically adjustable with electronic positioning control. Splitter wedge opening 48 - 600 mm. Chain bed on the outfeed side. Motor 90 kW with power belt drive. Hydraulic unit. Chip separator ASV DK II with 2 separating lamellae. Klsdpewn D Izefx Adwol Electrical cabinet with power section and PLC control. Control panel. Lath clamping sleeve 403 mm clamping length. Adjustment and zero sleeve. Professionally dismantled and loaded onto truck, free of charge.

Year of construction: 2003, condition: ready for operation (used), Used drum dryer manufactured by SAFEM, extracted from a line of gluten-free products. Fluid: Steam Design pressure: 12 bar Kedpfxjq Nmuwe Adwoll Maximum operating pressure: 9,5 bar Test pressure: 24 bar Maximum operating temperature: 192ºC Volume: 4.55 m3 Pressure x Volume: 54.6 bar x m3

Condition: excellent (used), functionality: fully functional, machine/vehicle number: Deilman S, Second hand but fully renovated dipping tank for wood treatment. 6,5m long, 1,35m wide and 1,5m high with loading platform 6m. Automatic steering with 4 programs of dipping. Ready for work. Can dipp packets 1,2 x 1,2m - ideal for pallet boards Kjdpoudwdwjfx Adwsll

Condition: good (used), functionality: fully functional, power: 22 kW (29.91 HP), overall weight: 2,600 kg, Year of construction: 2006, Eric Schomberg ES 60/120 Shredder in good condition for sale year of manufacture: 2006 Cutter width 600 mm Cutter length 1200 mm Cutter shaft center distance 250 mm Cutter shaft speed approx. 16 rpm Cutter shaft torque approx. 17,000 Nm Kedpfxetzbvyj Adwsll Filling hopper 1,200 mm x 2,400 mm Drive power 2 x 11 kW Total drive power 22 kW Weight 2,600 kg

Year of construction: 1971, condition: ready for operation (used), machine/vehicle number: 713406, -KOM 105- Offered here is a grinding machine from the company Kehren & Co with a filter system from the company FAUDI. This is a segment grinding machine with vertical grinding spindle. The machine has 2 grinding tables/magnetic plates for pendulum machining. Technical data: Grinding machine: Manufacturer: Kehren & Co Type: D7B Kledpfx Adsg Nt A Eswsl Year of manufacture: 1971 Make No: 713406 2 grinding tables/ magnetic plates with 700mm diameter. Grinding method: segment grinding Control: Marposs weight: 6.600kg Filter system: Manufacturer: Faudi - Filtersystems Type: AFB 1,3 / 1001 Year of manufacture: 1992

Condition: new, with planing spindle Type R-R-RP1300 Working width 1300 mm Min. working length 538 mm Working thickness 3-110 mm Feeding speed 6-30 m/min Total motor power 77,12 kW Koded H Sc Eopfx Adwsll Motor for first unit 22 kW Motor for second unit 30 kW Motor for third unit 18,5 kW Abrasive belt size 1330x2200 mm Working air pressure 0,55mpa Volume of dust collection device 12000 m3/h Transport dimensions 3090x2020x2260 mm Weight 4700 kg

Year of construction: 1997, condition: refurbished (used), 2 pieces volute casing pump in process design 1 piece completely overhauled, new ball bearings for pump and motor. Mechanical seal overhauled by specialist company. All seals new. Flow rate: 6 m³/h Delivery head: 25 m Pump speed: 1440 1/min Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277mm Bearing type: roller bearing Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication type drive end oil Lubricant monitoring Oil level controller Materials: Pump housing: Duplex steel Noridur 1.4593 (9.4460) Wear plate: Duplex steel Noridur 1.4593 (9.4460) Pressure cover: Duplex steel Noridur 1.4593 (9.4460) Shaft: Heat-treated steel C45+N Impeller: Duplex steel Noridur 1.4593 (9.4460) Bearing bracket lantern: Cast iron EN-GJL-250 Shaft sleeve: Duplex steel 1.4462 Nominal size of suction nozzle: DN 80 Discharge connection Nominal diameter: DN 40 Nominal pressure suction PN 10 Nominal pressure pressure PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with intermediate sleeve Base plate: gray cast iron Kedpfxoiuznus Adwoll Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 1/min Frequency: 50 Hz Rated voltage: 400 V Rated motor power: P2 7.50 kW Thermal class: F Motor protection class: IP55 Cosphi: 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg The material 1.4593 Noridur is very well suited for - Chemical and process engineering industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and extraction - Flue gas desulphurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Waste water treatment/sewage treatment plants - Offshore and marine technology

Year of construction: 2024, condition: new, Overview - of the different variants *Not every position is required: Optional: -Bale shredder MHB from 24.990 € net -MHZ straw mill from € 7,980 net -Special hopper 970 € net -Cyclone from € 3,750 net -Sheet metal silo demonstrator with discharge (only sketched in the picture) *optional, if you want to load with the wheel loader Unit price net from € 14,750 - Demonstrator -Dedusting auger - length approx. 4 m 4 sieves are mounted on the underside, which are extracted. Unit price net from: 9.750 € - Extraction parts / hoses flat rate 945 € net - Complete control system Net unit price: € 2,750 -Demonstrator extraction unit MMJET 160 Demonstrator, with cleaning Connection 160, fan 2,2kw air capacity 1850m³ /400 V Automatic compressed air cleaning Unit price net from: 6.950 € -Baler B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour with + - 20 kg from 59.995 € net *A reference system (baler) is located in zip code: 64579 Gernsheim Technical data: Bale size (WxDxH): 400 x 400 x 800 (height can be adjusted on request) Bale weight +/- 20 KG (depending on material) Capacity: approx. 30 bales per hour Storage container approx. 0.7m³ capacity Filling level sensors for min./max. filling level in the container Hydraulic pre-compressor Hydraulic compression ram Hydraulic unit, valve block with oil tank Pump 18.5 KW / 50 liters Rollers in the bale chamber for easy bale push-off Dimensions (l x w x h) 3105x2830x2455 mm Weight approx. 1500 KG mütek baling presses / wrapping machines are designed for the production of bales from a wide variety of materials such as shredded micanthus or elephant grass, wood chips, sawdust and shredded straw. straw. The machine is characterized by a robust design that guarantees consistent quality in continuous operation. quality in continuous operation. The baler compacts the material filled into the storage container without the addition of binding agents and packs the material into plastic bags. The volume of the material can be considerably with the baling press. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18 % Atro. The container of the mütek baler can be fed automatically or manually and has a volume of approx. 0.7 m³. volume of approx. 0.7 m³. Containers with a larger volume or with an attached suction and filter system as a complete disposal unit are also available. In addition to automatic filling via deduster, mütek also offers filling by means of screw conveyors. With both variants, automatic automatic dedusting is possible. mütek baling presses are equipped with a control cabinet for the control system. In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adapted to your requirements on request. The following advantages arise in the production of bales: - simple and safe storage Kodpfx Asff Sbisdwell - No loose dust - Minimization of the storage volume - Low transport volume *Requirements for source material: - dry (max. 30 % ATRO) - Maximum length 35 mm

Condition: reconditioned (used), Totally renovated Log Haul Conveyor 8 Meters long Klsdpfsncft Uox Adwol