Two-armed drill

VEM DGB 32

Condition: used, pressure 160 t passage width / mm Dsdpfsiulkqex Ai Secn stroke / mm Working height 800 mm total power requirement 15 kW weight of the machine ca. 11,8 t - Table size: 1000x1000mm - Distance table/ram, large stroke above, gain. above: 800mm extra information Removable table

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, REX HOMS-310-K Four-sided Planer Year of manufacture: 1980 Serial number: 18.568 Power: 91.69 kW It has not been used since 2021. The machine was stored in a closed production hall for the entire period and is fully functional. After purchasing the machine, the electrical cables were replaced with new ones. We rate the technical condition as very good - visually there are visible traces of use, but technically everything works properly. The reason for the sale is the end of glued wood production. Maximum working width: 305 mm Minimum working width: 50 mm Maximum workpiece height on 2 sides: 310 mm Maximum workpiece height on 4 sides: 160 mm Minimum workpiece height: 17 mm driven upper and lower feed rollers Dcodpfswfqh Aex Ai Ssn

Condition: new, Year of construction: 2024, pressure 60 t stroke 400 mm table surface area 800 x 500 mm feed down 4,03 mm/sec feed up 5,82 mm/sec column daylight 820 mm oil pressure max. in the work cylinder 400 bar oil volume 26 l voltage 400 V / 50 Hz total power requirement 3 kW weight of the machine ca. 0,55 t dimensions of the machine ca. 1,5 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, Dcedpfx Aijvcrmvs Sjn • Pressure cylinder moveable horizontally, • Working table hydraulical adjustable, • Cylinder Ø 150 mm, piston base Ø 85 mm.

Year of construction: 1994, condition: excellent (used), TECHNICAL DATA: LENGTH OF WORKING ARM: 1600 mm MAX. CUTTING THICKNESS with 130 mm blade: 45 mm MAX. CUTTING THICKNESS with 160 mm blade: 70 mm MOTOR POWER: 0.75 kW – 380 V / 50 Hz NEON LAMP VOLTAGE: 220 V BLOWING DEVICE TO CLEAN THE WORKING AREA: ELECTRONIC, 220 V WORKING TABLE: 1000 x 2000 mm DIMENSIONS: 2400 x 1000 x 1700 mm Dcsdpfx Aer Hmtkji Son WEIGHT: 230 kg

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 680 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,642 mm, fuel type: diesel, mast type: triplex, construction height: 2,400 mm, power: 37 kW (50.31 HP), fork length: 1,200 mm, empty load weight: 4,780 kg, total length: 3,189 mm, drive type: Diesel, construction width: 1,350 mm, Rough terrain forklift Dcedovuck Nepfx Ai Son Load centre: 500 Fork width: 120 mm Fork thickness: 45 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: very good Front tyre type: Pneumatic Front tyre condition: 80 - 100% Rear tyre type: Pneumatic Rear tyre condition: 80 - 100% Sideshift, 3rd valve, rear work light, front work light, heating, full cabin, beacon,

Condition: used, machine/vehicle number: 1380A, mileage: 20,481 km, power: 179 kW (243.37 HP), first registration: 07/1984, fuel type: diesel, overall weight: 16,388 kg, axle configuration: 3 axles, color: green, gearing type: automatic, Equipment: ABS, all wheel drive, compressor, crane, trailer coupling, TUV is made NEW!!! So-KFZ registration , The AM General in a good condition directly from the Army , Well maintained and maintained, the body is in good condition (vehicle from the reserve) therefore the paint is bad and partially flaked , The M936W / W is equipped with: All-wheel drive, 5-speed automatic gearbox, transfer case with stowage and off-road gear, power steering (super smooth), air brakes with ABS, 3 front seats, the body is a 5-ton telescopic crane with an extension. The vehicle is equipped with: front thread, heavy rear thread, tractive force 12474kg, mountain support (these can be attached to the front, rear and side, 4-point support can be extended laterally, various accessories, the km are miles, driving license class 2 (truck), tire size 11.00R20 (very good condition), top speed 90 km / h, displacement 14011cm? , , 24Volt power supply , The M936 has not only Tuv, but also drives reliably :-) can also be insured cheaply as a young timerr AM Generalist drives really great makes a lot of fun . - ATTENTION ! ! the DEALER PRICE is as the vehicle is, without TUV and so on.... - All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 le Gru?e Euer Philipp aus dem Hanfbachtal - Dedpsqx S Adsfx Ai Secn

Condition: used, Combined disc + vertical belt sander Disc diameter: 600 mm Dedpfx Aolagdwsi Sjcn Encumbrance: 110 x 80 cm, height 160

Condition: reconditioned (used), Year of construction: 2001, , Basic information Manufacturer TOS SVITAVY Type PKSN 32 B Category Multiripsaws Shipping Delivery to be agreed Terms Technical parameters Maximum Working Width #### mm 400 Machine with simultaneous transport and processing of the element The machine is CE marked Used machine Minimum Working Length #### mm 330 Engine power #### kW 55 Supply voltage #### V 380-400 Safety Guards Completely renovated Electrically Controlled Adjustments Technically efficient Perfect condition Shank Diameter #### mm 70 With one tool spindle With noise reduction housing Cast iron body Feed Speed #### m / min 36 Spindle Lock Maximum cutting height #### mm 160 New Electricity New Mechanics New Pneumatics New Painting Noise Level #### Db 70 Right and Left Rotation Automatic adjustment Very good condition Cutting width #### mm 400 Machine width #### mm 1800 Machining Width Dedpfshixkhox Ai Sjcn Saw blade diameter #### mm 400 Machine weight #### kg 3500 Machine dimensions #### x #### x #### mm 1600x1800x2500 Cutting Height Machining height #### mm 160 With freely adjustable speed With the transport of the element in the machine

Condition: new, Hydraulic winch for log splitters, cranes, mini excavators, tractors, agricultural vehicles, viticulture, horticulture, and many other applications. The hydraulic auxiliary winch can simplify many tasks: - Pulling and positioning firewood to the log splitter - Pulling logs onto trailers - Pulling out tree stumps and trees - As an auxiliary winch on forestry cranes and small excavators - As a winch for small tractors and narrow-track tractors A robust steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes offers many possibilities for attaching the winch (the threads are cut and painted. They must be re-tapped with a tap before use due to the rust protection). A 20 m long and 6 mm thick steel cable is installed. Large cable pulley for long service life of the steel cable. We install hydraulic motors from 50 to 630 ccm (standard = 400 ccm), depending on the required speed and pulling force. Maximum working pressure: 225 bar peak Continuous operation pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 L/min hydraulic oil Color: red Dcodpfx Aedf Ufdei Sen Dimensions: Length: 500 mm Length with swivel: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm The winch is available for mounting or welding. This version includes an electric hydraulic valve and hoses to the motor. Article number: HAW1700-EV NOTE: Figures 2, 3, and 4 are mounting examples!

Condition: new, functionality: fully functional, The Brugger Grip 130 logging tongs with 3-ton rotator is the ideal solution for efficient logging and handling. logging and handling. These forwarding tongs offer an opening width of 130 cm and are equipped with a powerful rotator that enables precise control and rotation. rotation. The versatile attachment option makes the Grip 130 extremely flexible. It can be easily attached to the rear attachment with three-point linkage or on the front loader with Eur linkage. Djdorbidvopfx Ai Socn This adaptability enables effective wood processing in various application areas. areas of application. - Opening width 130cm - 3T rotator can be rotated through 360 - Two double-acting circles are required - Suitable for three-point linkage KAT 2 + 3 - Suitable for Euro mount front loader The robust construction and high-quality workmanship guarantee durability and reliability reliability even under demanding conditions. The Brugger Grip 130 is the perfect choice for farmers, foresters and anyone who needs a reliable grapple for their woodwork. timber work.