Meat processing machine

WEIGHING AND BAGGING SYSTEM

Year of construction: 1983, condition: refurbished (used), Baader 185 file + skin machine for whitefish is suitable for large & medium-sized cod, Haddock, Gråsej, Merluza etc. Capacity 24-32 fish / minute, Fedeifpz Iopfx Ag Rsft Year mod 1983. Dimensions 690 x 185 cm H 180 cm.

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 403, THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool: Ffsdpfxen D Ew Io Ag Rst Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Vending machine cup capacity/capacity/contenance=223ml 593 // 460 // 8 // Coffee-to-go / thermo mug / thermo cup Filling capacity / Capacity / Contenance=300ml / 12 oz 509 // 452 // 6 // Ice cream cup: filled to the brim=140ml / Filling capacity with headspace 6mm: 120 ml 591 // 459 // 10 // Thermo mug ⌀ 81/180ml 740 // - // - // Standard cup with sealing edge ⌀ 75-120ml 3589 // 458 // 12 // Coffee-to-go / thermo mug / thermo cup: Filling capacity / Capacity / Contenance=80ml 595 // 456 // 10 // Vending cup / Gobelet pour automate: Filling capacity / Capacity / Contenance=150ml 210 // - // - // Baking case / technical part / plate or tray 8000 // 455 // - // Granule cup 180 ml / technical part with flat sealing edge

Condition: used, Year of construction: 1989, operating hours: 18,000 h, Used Linear Filling machine Tetra Pak® TBA 8 for sale Ffodpsvguymsfx Ag Rjt Ask for more details regarding our special offer for this Used Linear Tetra Pak® TBA 8 Filler. This excellent second hand aseptic linear filling machine has been revised in 2016.  It has a production capacity of 6,000 bottles per hour and was in production for 18,000 hours. It is set up for 1000 ml bottles. The filler is currently stored away and so can not be dry run for demonstration purposes. The filling machine is on sale as-is.

Year of construction: 2015, operating hours: 2,450 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 222837, We are selling a T 700 XS from a vegetarian production as good as new. Enclosed 4 tools incl. tool change trolley. Vario 1, tray 171 x 127 mm, 3-use (1-track, 3-row) Vario 2, tray 187 x 137 mm, 3-use (1-track, 3-row) Vario 3, tray 122 x 96 mm, 4-use (1-track, 4-row) Fodpjq Umumsfx Ag Rjft Vario 4, tray 227 x 178 mm, 2-use (1-track, 2-row) See detail in PDF

Condition: like new (used), Year of construction: 2009, functionality: fully functional, ITU evaluation unit Sheet Scale Citizen 910 printer PIO signal output - designed for use with paper joggers - scale must be zeroed with specific jogger Ffedogz Imuopfx Ag Rst

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, input current: 238 A, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Fedpfx Agevf E Ave Roft Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Foldingmachine for 8 pages ! Make: HEIDELBERG-Stahlfolder Type: TI 52-4 - 4 - RD Format: 520 mm built: 2010 Mach.-Nr.: 1224431350 - Continuus feeder - double infeed-suction-wheels - 1. fold-station 52 cm, 4 buckles - 2. fold-station 52 cm, 4 buckles - anti-noise-hood - center control-station for all functions - standard delivery - compressor Ffsdpsw I S Eyjfx Ag Rst - tools, technical documentation Price on request ,-- / FCA ex DK Availability: Immediately ! Please ask for further detailed pictures ! Video available !

Year of construction: 2025, condition: new, From linear to combination scales Application: Dosing free-flowing products in accurate quantities. Ffsdpfoq T R Sbsx Ag Rjt Features of the weigher - Simple operation - Quick and easy cleaning - Low maintenance requirements - Tool-free (dis)assembly of all format parts in contact with the product - Low maintenance effort - Stainless steel design (1.4301) - Control system fully integrated in the machine housing - Infinitely variable vibration system for optimum production flow - High accuracy due to combination Technical data - Number of weighing heads: 10 - Weighing container: 2.5l - Weighing range: 10 - 1000g / 2,500g - Accuracy: ±0.2-1.5g - Speed: 60 bags/min (depending on product) - Control panel: 7" touch screen display - Power: 1kW / 230V / 50Hz - Dimensions (LxWxH): 1620mm x 1100mm x 1110mm - Machine weight: 380kg

Condition: excellent (used), Year of construction: 2018, Baader 588 Filleting Machine The BAADER 588 is a unique and user-friendly filleting machine for small and medium-sized whitefish – fresh or defrosted. The consistent running of fish through the machine guarantees a higher throughput. Centralized mechanical adjustments of cutting parameters allows for different species and precise cutting. The BAADER 588 produces fillets of outstanding quality – even from soft fish. It has been specifically designed to allow for easy and efficient cleaning and servicing. The BAADER 588 significantly reduces subsequent trim work downstream. B’Logic® is our dedicated software solution for performance monitoring and yield control. Benefits For fresh or defrosted raw material Continuous and stable operation Simple to use Precise cutting tools minimize ‘giveaway’ Technical Data Working range (approx.) Cod: 400–2,500 g / 35–70 cm Haddock: 400–2,300 g / 35–65 cm Saithe: 400–2,000 g / 35–62 cm Hake: 160–800 g / 20–47 cm Alaska Pollack (h+g): 150–450 g Throughput Up to 35 fish/min. Up to 40 fish/min. (Alaska pollack) ‍ Features Simple operation and maintenance Rapid changeover for to different species Easy to access, maintain and clean Best fillet quality Active cutting tools Smooth surface as a result of reduced fillet stress during processing No gaping No blood spotting No black belly skin White membrane on Flexible Suitable for a wide range of species Fresh or defrosted raw material Small machine footprint Direct fillet transfer to BAADER 59 Skinner possible for consistent product flow Fedpfstu Uu Djx Ag Rsft Hygienic, open and flexible design Open design for easy access and supervision Open design allows for easy cleaning Quick and easy to remove conveyor belt system

Condition: good (used), Year of construction: 1999, PCI -NF MEMBRANE FILTRATION PLANT Item: M-2199-PCI-NF Plant This plant is membrane filtration plant used for remove water and / or very low molecular weight substances from liquid dairy products. The low molecular weight substances that are typically removed with NF membranes are monovalent ions such as K ions and Na ions. With APV Rannie-High Press Pump Good condition, Not used last two years!. Year of Production: 1999. Dimension: L 4.000 MM W 1200 mm H 1900 mm Ffsdpehqhw Ijfx Ag Rjt Press: Medium pressure 20 bar Retentat flow: 1200 l/h