Lathe

Weiler Condor VS-2/Praktikant W

Condition: good (used), Year of construction: 1988, Weiler lathe Type Condor B 2-axis digital readout Center height 165 mm Center distance 750 mm Rotation over bed 330 mm Rotation over cross slide 185 mm Spindle bore 40 mm Gedovgmbvopfx Abhjip Connected load 3 kw Speed 22-2800 rpm Tailstock MK 3 Coolant pump (not connected) work light Automatic longitudinal and planar feed spindle brake - Folding jaw chuck guard - splash guard Weight approx. 1040 kg 3 jaw lathe chuck Multifix B Rotating center point

Condition: ready for operation (used), turning length 800 mm turning diameter over bed 330 mm turning diameter over slide rest 170 mm turning speed range 24 - 1900 U/min spindle bore 38.0 mm centre height 165 mm total power requirement 3.5 kW weight of the machine ca. 850 kg. dimensions of the machine ca. 1850 x 800 x 1700 mm from a vocational school - in good condition (!!) particularly suitable for medium-precision turned parts - in checked conditions - machinenvideo - ?v=GDoJ0Z7Dckw Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 770” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - TRIPAN steel holder with 3x inserts - Sliding tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - EMERGENCY stop button Gsdpfxsxmakto Abhoip - Operating instructions

Year of construction: 1977, condition: ready for operation (used), A Weiler precision lathe, overhauled by Mammut in 2004, is available. Center height: 125mm, max. swing over bed/cross slide: 260mm/140mm, distance between centers: 500mm, spindle bore: 28mm, clamping range: 1mm-26mm, drilling diameter: 22mm, cutting edge height: 22mm, tailstock quill diameter: 80mm, tailstock quill travel: 80mm, tailstock offset: 450mm. Documentation available. An on-site inspection is possible. Gjdpfx Aboxqqmtjhsip

Condition: new, diameter 200 mm height 105/265 mm Gisdpfjupxd Rsx Abhjp centre height 105 mm weight of the machine ca. 41 kg dimensions of the machine ca. 400 x 330 x 310 m

Condition: good (used), Stock number: 2889 Manufacturer: Weiler Year of manufacture: 1969 Type / Model: FDU 260/38 Machine number: 11597/330 Control: conventional Center width: 400 mm Passage: 38 mm Tip height: 125 mm Turning diameter over bed: 250 mm over slide: 140 mm Speed range: 30 to 2,500 rpm Number of turret positions: 6 Power requirement: 0.9 kW Accessories/equipment: Various collets and turret inserts Condition: good Gjdpjugr Aaefx Abhoip Weight: approx. 0.5 t Dimensions: 1,300 x 700 x 1,200 mm

Condition: used, L + Z Lathe VOEST ALPINE - WEILER Type DA 210 / 1 Machine No. 1-004/2581 Year of manufacture: 1984 Centre distance: 1000 mm Swing over bed: 420 mm Centre height over bed: 210 mm Swing over cross slide: 240 mm Centre height over cross slide: 120 mm Spindle bore: 52 mm Spindle speed: 33 - 1500 rpm, 12 steps Godpeyah Rvofx Abhjip Chuck flange: short taper DIN 55027 size 6, 4x M12 Tailstock taper: MT 4 Motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle speeds via 12-step gearbox - 3-jaw scroll chuck AROWA Ø 200 mm (only one set of chuck jaws) - Multifix quick-change tool post, size B, with 3 tool holders - Automatic longitudinal and cross feed - Coolant system - Spindle brake - Emergency stop - Splash guard - Fixed steady rest Ø 160 mm - Machine lamp - Operating manual Space requirement (L x W x H): 2200 x 1200 x 1450 mm Weight: 1500 kg In very good condition

Condition: excellent (used), Year of construction: 2005, operating hours: 48,242 h, functionality: fully functional, machine/vehicle number: M253595-3634, This Harrison M250 lathe, serial number M253595-3634, is in fully functional condition. It comes with 3-jaw and 4-jaw chucks, coolant, work light, and a complete set of change gears for cutting metric threads. The machine has been used very little throughout its life, and the bed and carriage are in particularly good condition. It can be demonstrated using a phase converter, but I am not prepared to operate the machine with this device. Gsdsx Akc Ejpfx Abhjip

Condition: used, Year of construction: 2004, GILDEMEISTER - CTX 410 - 2004 - used condition as shown on photos - under power, can be tested Giodpfeyl Sr Uox Abhep - more photos available

Condition: excellent (used), functionality: fully functional, feed length X-axis: 300 mm, feed length Y-axis: 160 mm, feed length Z-axis: 320 mm, overall weight: 860 kg, Ruhla Type 58 Universal Toolroom Milling Machine Thiel Duplex 58 like Deckel FP1 Compact machine with drilling spindle and automatic feed in all 3 axes includes vice New digital display with 1 measuring rod included Swivel table +/- 0-30° Table 715 x 260mm X 300mm Y 160mm Z 320mm Dimensions (LxDxH) approx. 110 x 110 x 170cm Inspection and testing are welcome Gjdpfx Abjwf Agdjhoip

Condition: ready for operation (used), functionality: fully functional, spindle bore: 37 mm, spindle speed (max.): 1,000 rpm, spindle speed (min.): 45 rpm, overall weight: 650 kg, total height: 1,300 mm, total length: 1,700 mm, total width: 700 mm, 3 Phase 380V motor is running perfectly! Left & right rotation. Geared headstock, gears run in oil. 8 adjustable spindle speeds from 45 up to 1000 RPM. Spindle clutch allows speed changes while the motor is running. Metric lathe. Norton gearbox for easy thread cutting. Gedpoylxluofx Abhjip Thread cutting dial indicator. Power feed in both longitudinal and cross directions. MT3 tailstock taper. Gap bed for machining larger diameters. Distance between centers: 600mm Center height: 170mm Spindle bore: 37mm Turning diameter in gap bed: 560mm Overall dimensions: 170x70x130cm Made in the UK. Includes all accessories as shown in the images at the front of the machine. Contact us for shipping options! € 3,250.00