CO2 Cutting and Engraving Laser

WINTER LASERMAX RA 1325-150W

Condition: used, Year of construction: 2006, functionality: fully functional, Fisher+Rueckle EM-28 Edge strengthening and trimming device edgemaster, year 2006 for sale! Veneer strip length 420 - 2800 mm Veneer sheet width (cross grain) 400 - 4200 mm Veneer strip thickness (incl. trimming) 0,3 - 1,5 mm Veneer strip thickness 0,3 - 2,0 mm Production speed (continuous) 15 - 35 m/min. Cut-off each side 10 - 350 mm Kodoumrgaspfx Aayodk Tape (paper) width 6 mm Tape (paper) thickness 0,16 mm Type CP-99 Roll (core in- and outside) ∅ 75 mm, ∅ 325 mm Roll (width) 65 mm Tape running meter 3200 m Electric energy 1,1 kW Compressed air 6 bar Compressed air consumption 5 NL/min

Condition: new, Year of construction: 2026, Extraction capacity approx. 5200 m3/h Motor power 3.0 kW Rotational speed 3000 rpm Rated voltage 400 V, 50 Hz Extraction port 250/200 mm Ksdpfx Ajlkd Sdoayedk Extraction speed 28 m/sec. Number of filters 28 Negative pressure 2800Pa Filter category G Polyester filter material Sound level 80 dB without connection / 65 dB when connected through The pipe to the machine Filtration area 13.7 m2 Dimensions (L x W x H) 2000 x 750 x 1980 mm Weight 182 kg

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 65039, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 8,000 rpm, Traveling column machine Generally overhauled 2023 Work table clamping area mm 1500 x 1000 Table height mm 750 Number of T-slots 6 Size of T-slots DIN 650 mm 18 Travel paths X-axis mm 1500 Y-axis mm 1000 Z-axis mm 700 Distance table top edge - spindle bottom edge min/max. mm 150 / 850 Main spindle drive for speed 8000 min-1 AC motor, frequency controlled kW 16 at 44% ED Speed range: min -1 15 – 8000 Torque at 44% ED Nm 104 constant up to min -1 1500 Kdodswv Nl Uopfx Aaysk Feed drives X-axis AC servo motor kW 3.5 Y-axis AC servo motor kW 2.0 Z-axis AC servo motor kW 3.5 Rapid traverse speeds (X/Y/Z): m/min. 30/30/20 Indirect position measuring system. Accuracy Positioning accuracy X, Y axis to 1000 mm mm ± 0.0150 Repeatability X, Y axis mm ± 0.0075 Positioning accuracy Z axis mm ± 0.0150 Repeatability Z axis mm ± 0.0075 24-way tool magazine mounted on the right-hand side of the traveling column - Tool positions 24 - Tool shaft (DIN 69871 / 69872) SK 40 - Max. tool diameter mm 76 - Max. tool length mm 250 - Max. tool weight kg 8 Machine control Heidenhain iTNC530 optional 620

Condition: new, Year of construction: 2026, Extraction capacity approx. 6500 m3/h Motor power 5.5 kW Speed ​​3000 rpm Rated voltage 400 V, 50 Hz Extraction nozzle 280/200 mm Extraction speed 28 m/sec. Number of filters 37 Negative pressure 3000Pa Filter category G Polyester filter material Kdedpfxjv Dtl Ao Aaysk Noise level 80 dB without connection / 65 dB when connected to the machine via the pipe Filter area 17.1 m2 Dimensions (L x W x H) 2080 x 920 x 2100 mm Weight 248 kg

Condition: new, Year of construction: 2024, Suction nozzle diameter: 150 mm Kdodpeknyhhsfx Aayok Flow rate: 3000 m³/h Negative pressure: 3500 Pa Air velocity: 47 m/s Chip bag volume: 2 x 0.1426 m³ Filter area: 5 m² Filter cleaning: manual Motor power: 1.5 kW Dimensions: Weight:

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3500x2100x1300 mm Total power requirement 1500 kW Kedpfxov Uch Uo Aayjdk Weight 1200 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 920x2100x2150 mm Weight 300 kg Kdodsvz Erpepfx Aayek Total power requirement 5,5 kw

Condition: excellent (used), Year of construction: 1992, I sell the double knife veneer guillotine Josting ZFS 2800. Year 1992 / fully reconditioned 2007. Cutting length 2810mm. Kedpfx Aevxli Asayodk Cutting height 80mm. Cutting width 20-470mm. Very good condition. Available immediately.

Condition: ready for operation (used), A complete bending line for the production of flange rings is available. Workpiece dimensions X/Y: 440mm/350mm, max. cross-section (S355 NL): 65000mm², max. flat steel length: 22000mm, max. outer ring diameter: 7000mm, max. inner ring diameter: 2320mm, max. ring weight: 11t. 1) Preheating furnace holes, machine dimensions X/Y/Z: approx. 1500mm/500mm/22000mm. 2) Faccin conveyor belt, length: 22000mm. 3) Ring bending machine Faccin Giotto 3000. 4) Flash butt welding machine Asdorfer HY 1500, power: 1500kVA. 5) Faccin handling system, max. ring diameter: 6500mm. Documentation available. On-site inspection is possible. Kdodpfx Aajvr Edaoyek

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1180x860x710 mm Weight 175 kg Kedpfx Aasvz Emgeyedk Total power requirement 3,7 kw