Drawer cabinets

WMT 8 - 72/100

Condition: new, 8 St. range L-W-H 720 x 580 x 1000 mm weight 128 kg 100Kg je Lade Stable tool cabinet with 8 drawers, lockable. 2 x 75, 4 x 100, 1 x 150 and 1 x 200mm Internal dimensions: 620x450 mm. Maximum load per drawer 100kg!!! Lsdpeu Imptofx Ag Aoaf Furnishings: 32x boxes 75 x75 mm. 16x boxes 75 x 150 mm. 8x boxes 150 x 150 mm. 12x dividers long 32x short dividers 1x stacking tray

Condition: used, Year of construction: 1987, pressure 160 t chamfer lenght 4000 mm distance between columns 3060 mm control FORTRON CNC 10 H 4 throat 280 mm stroke 250 mm dayligth 500 mm table length 4050 mm table width 280 mm feed down 70 mm/sec feed up 68,4 mm/sec working feed 9 / 3,5 mm/sec operating pressure max. 205 bar oil volume 400 l total power requirement 19,5 kW weight of the machine ca. 20,8 t Total weight including accessories 22 t Lodpfx Agstqqr Ro Aoaf dimensions of machine L x W x H 4,8 x 1,88 x 2,93 m dimensions of switch cabinet 1,6 x 0,5 x 2,25 m - 3-axis machine - Acc.: programmable back gauge, upper and lower dies, table extensions

Year of construction: 2016, condition: reconditioned (used), For sale is 1 hood-type dishwasher from Meiko, model DV 80.2, manufactured in 2015/16. Condition: Good, has been used partially with soft water. No dosing unit included! These machines are former lease units. Various configurations are available, potentially with internal salt softener, with GIO module, or completely without softener. Please let us know how you would like your package to be assembled. The quoted price is a base price depending on the equipment—request your individual offer! Comes with a 6-month spare parts warranty. Preventive maintenance with replacement of several wear parts has been performed regularly. Inspection and test run on site is possible and encouraged. Technical Data: Lsdpop Ebn Defx Ag Aeaf Output: up to 60/40/17 racks (equals approx. 1080/720/306 plates or e.g. 2160/1440/612 glasses) per hour Program cycle times: 60/90/210 seconds Rack size (mm): 500 x 500 Entry height: 440 mm Tank capacity: 22 L Water consumption per rack: 2.6 L Tank heating: 1.3 kW Boiler: 7.5 kW (cold water) Boiler: 9.0 kW (hot water) Material: Stainless steel Connected load: 400 V / 11.2 kW (cold water), 9.7 kW (hot water) Dimensions: W 635 x D 750 x H 1470/2050 mm Electrical Installation: Electrical connection: 3-phase current, 3 NPE, 400 V, 50 Hz. The electrical setup complies with VDE regulations. Water Installation: The dishwashers can be connected directly to the mains water supply without additional safety fittings. Minimum flow pressure 0.6 bar, maximum pressure 5 bar. Installation regulation EN 1717 must be observed. Drain: ¾". On-site wall drain max. 700 mm height. Length of connection hoses approx. 1.8 m from machine. Collection of the machines is preferred. Shipping via freight company is possible at buyer’s expense.

Year of construction: 1980, condition: good (used), A used, very well-maintained cycle-controlled lathe from Weisser Heilbronn with a SIEMENS control system. Distance between centers 2000 mm Center height 295 mm Swinging diameter over bed 600 mm Swinging diameter over cross slide 260 mm Swinging diameter in the crotch 800 mm Total length of the crotch 375 mm Bed width 450 mm Ljdjgyy I Aopfx Ag Aeaf Travel of X-axis 350 mm Travel of Z-axis 1850 mm Spindle nose DIN 55022, size 8 Spindle speed, number 18, 14 – 1400 rpm Spindle bore 71.5 mm Diameter of front bearing 110 mm Feed range 0.01 – 40.95 mm/rev Rapid traverse 8 m/min DC drive 15 kW 400V 50Hz Max. permissible torque on the spindle 2500 Nm Tailstock quill 80 mm Quill stroke 250 mm Internal taper in quill MK 5 Length x width x height Machine weight 5500 kg Accessories: Tailstock Pneumatic three-jaw chuck with replaceable jaws, 315 mm Quick-change tool holder "MULTIFIX" in front of the center, size "C" Four-position turret behind the center Tool holder Coolant system Follow rest, pneumatically actuated Technical data and dimensions: Subject to change without notice. Video conference via WhatsApp possible after scheduling an appointment.

Condition: excellent (used), Year of construction: 2011, *The video is just an example of how this cell can be prepared. Grinding cell with Kuka KR 180 grinding robot Berger grinding cell 2012 (external grinding A1) - Total weight approx. 6300 kg - Cell dimensions: approx. 4650 x 2400 x 3100 mm 6-axis robot Kuka KR 180 R2500 Extra - Year of manufacture 2011 - KRC 4 controller - Additional axis (7th axis) BSS10 belt grinding station - Max. belt dimensions 3500 x 30 mm - Max. contact wheel diameter 200 mm - Motor power 4 kW 2 x polishing stations - Polishing wheel diameter 350 - 600 mm - Power 5.5 kW Tool changer cabinet Interoll Automation GmbH belt conveyor - Total length approx. 2000 mm Laodpeg Saqvofx Ag Asf - Belt width approx. 440 mm We have 4 such cells.

Condition: good (used), Year of construction: 2006, Controll: NC4 Clamping force: 250 tons Distance between tie bars: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Dylight max: 1505 mm Screw diameter: 50 mm Shot volume: 530 cm3 Shot weight: 482 g Injection pressure: 2426 bar Cores- 2 Hot runners- 12 + Robot Demag ergotech W733-0174 Lajdsrgw Exspfx Ag Aef Year of manufacture: 2006 Handling capacity: 10 kg Number of axes: 3 Max range: 1000 mm X- 900 mm Y-1400 mm Z- 2500 mm

Condition: like new (used), Year of construction: 2010, functionality: fully functional, spindle bore: 50 mm, turning diameter: 400 mm, turning diameter over bed slide: 400 mm, turning diameter over top slide: 250 mm, center height: 200 mm, center width: 1,000 mm, turning length: 1,000 mm, quill stroke: 120 mm, quill diameter: 50 mm, total length: 1,950 mm, total width: 1,060 mm, total height: 1,635 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 40 rpm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 40 rpm, center height over cross slide: 200 mm, overall weight: 865 kg, spindle mount: MK 3, spindle motor power: 5,300 W, Equipment: documentation/manual, rotational speed infinitely variable, type plate available, EMCO EMCOMAT-20 D universal lathe in very good condition, complete with tool cabinet and various quick-change tool holders, collets, and 3 RÖHM chucks. Manufacturer: EMCO Model: EMCOMAT-20 D Year of manufacture: 2010 Condition: very good, fully functional Location: Graz (Austria) Highlights at a glance: - Center distance 1000 mm – ideal for longer workpieces - Stepless speed control up to 3000 rpm - Robust, induction-hardened machine bed - Hardened and ground guides & gears - Electromechanical spindle brake - Very stable design – 865 kg machine weight - Safety monitoring via electrical limit switches - Equipped with a modern 3-axis digital display Technical data: - Center distance: 1000 mm - Center height: 200 mm - Turning diameter: 400 mm - Spindle bore: 50 mm - Speed: 40 to 3000 rpm - Spindle connection: DIN 55029 size 5 Lodpfxoyxvqvs Ag Aeaf - Drive power: 5.3 kW - Tailstock diameter: 50 mm - Arbor: MK3 - Stroke: 120 mm - Dimensions (LxWxH): 1950 x 1060 x 1635 mm - Weight: approx. 865 kg Optional equipment: - Coolant system - 3-axis positioning display with 0.001 mm accuracy Scope of delivery: - 1 x EMCO EMCOMAT-20 D - 1 x Drawer cabinet with various tools, collets, etc. (see pictures) - 2 x RÖHM chucks (3 and 4-jaw chucks) - 6 x Quick-change tool holders (see pictures) - 1 x Complete manufacturer documentation (operating manual, wiring diagram, etc.) Quality & Safety: The machine impresses with the typical EMCO quality “Made in Austria”: Are you interested? Please contact us to arrange a viewing appointment or to request a quote.

Condition: good (used), Year of construction: 2005, operating hours: 32,870 h, functionality: fully functional, machine/vehicle number: 6030578, turning diameter: 32 mm, spindle speed (max.): 8,000 rpm, bar diameter (max.): 32 mm, We offer for sale Traub TNL26K automatic cnc lathe. Machine is connected to power and can be inpected every time by prior appointment. Year of built: 2005 Spindle passage 32mm Main spindle: 6.7/10.7kW; 8000rpm Counter spindle: 6.7/10.7kW; 8000rpm Upper turret: 12pos. 12x12/16x16, driven tools 2/5.5kW, 0-6000 rpm, 6.4/21 Nm Lower turret: 12pos. 12x12/16x16, driven tools 2/5.5kW, 0-6000 rpm, 6.4/21 Nm Connected load: 24kW Barfeeder: FMB Turbo 5-42/4200mm Swarf conweyor: Knoll 240 S1/100 Laodevldx Ajpfx Ag Ajf Coolant Kompaktbandfilter: Resy Machine is sold with a lot of toolholders not driven and driven - list on attached photo.

Condition: used, Year of construction: 1993, functionality: fully functional, machine/vehicle number: 52334, travel distance X-axis: 2,750 mm, travel distance Y-axis: 1,060 mm, travel distance Z-axis: 1,550 mm, feed length X-axis: 3,000 mm, feed length Y-axis: 1,060 mm, feed length Z-axis: 1,600 mm, rapid traverse X-axis: 7,000 m/min, rapid traverse Y-axis: 7,000 m/min, rapid traverse Z-axis: 7,000 m/min, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, spindle speed (max.): 1,600 rpm, spindle speed (min.): 5 rpm, table width: 900 mm, table load: 8,000 kg, table length: 3,000 mm, mount diameter: 1,200 mm, table height: 600 mm, total height: 2,850 mm, total width: 2,450 mm, total length: 4,900 mm, type of input current: three-phase, rotational speed (max.): 1,600 rpm, rotational speed (min.): 5 rpm, workpiece weight (max.): 8,000 kg, overall weight: 16,000 kg, Equipment: rotational speed infinitely variable, ZAYER BF3 3000 HEIDENHAIN TNC150 ZAYER BF3 3000 HEIDENHAIN TNC 155 ZAYER BF3 3000 HEIDENHAIN TNC 155 ZAYER BF3 3000 HEIDENHAIN TNC 355 4 fully functional machines can be demonstrated under power Ledpfsyn Ir Asx Ag Asaf Price of machine with TNC150 Magnetic tables not included

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg Lajdpfxszdk E No Ag Aef 8 St. Tool trolley filled Contents and equipment see pictures