Shelving systems

WMT Typ 24

Condition: excellent (used), IMM 72780 Double-sided polishing machine Mint condition, the machine has hardly been used. TECHNICAL DATA Polishing wheel: 100 - 500 mm shafts: 35 mm Spindle speed: 1500 rpm Bjdpfsu Hanyex Ag Necw Voltage: 400 V, 50 Hz Weight of basic machine: Approx. 400 kg No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Year of construction: 2007, condition: ready for operation (used), An Amada CNC turret punching machine for medium format sheets including an MP300 M loading unit, Wilson X-Sharp grinding machine and numerous standard and special punching tools are available. 1) CNC turret punching machine Amada, year of manufacture: 2007, punching force: 300kN, max. sheet dimensions X/Y: 3000mm/1500mm, max. sheet thickness: 6.35mm, stroke rate: 600 strokes/min, simultaneous positioning speed: 128m/min, repeat accuracy: +/-0.1mm, machine dimensions X/Y/Z: approx. 5100mm/3200mm/2300mm, weight: approx. 18000kg. 2) Automatic sheet loading and unloading system Amada MP 300 M, max. sheet dimensions X/Y: 3000mm/1500mm, min. sheet dimensions X/Y: 1000mm/300mm, sheet thickness range: 0.8mm-6mm, max. load capacity per pallet: 3000kg, max. stacking height: 400mm, max. sheet weight: 170kg, max. pallets: 9, pallet change time: 25s, sheet loading time: 18s, weight: approx. 4900kg. 3) Wilson X-Sharp tool grinding machine. Documentation available. On-site inspection is possible. Bsdpfx Ajwhp N Deg Nscw

Condition: as good as new (ex-display), functionality: fully functional, type of cooling: water, FRONIUS TPS 5000 ✅ Scope of delivery: ➤Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤Fronius FK 4000 ➤Fronius VR 4000 wire feeder unit ➤Fronius standard intermediate hose package from 1.5m ➤Fronius trolley ➤Fronius hose package ➤Ground cable 3-4m ➤Pressure regulator This device can weld almost all materials, including aluminum, steel, and V2A. It features touch wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options and applications: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. We also offer the optional RCU 5000i control panel, which allows you to create and import characteristic curves to further expand the functions of the TPS device. ---- IMMEDIATELY AVAILABLE PROPER INVOICE A viewing is possible in Austria in Vienna, 1230! ✔ Insured shipping on a pallet is no problem! ✔ Bcjdpfx Ajwbh Ifsg Nsw ✅Questions✅Questions✅Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? To explain, we buy like-new used devices, disassemble them, check everything, replace wear parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You are buying an item from us that is also worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when we purchase from you? Yes, we provide a proper invoice. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Advance payment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set well packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately do not have the flexibility to offer a warranty. You are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.

Condition: new, Steel structure measuring 7 m x 32 m (extendable), column heights: 4.176 m (higher) and 3.338 m (lower). In other listings, we offer structures with higher columns: 5 m (higher) and 4.17 m (lower), as well as in various lengths, in versions with or without wall purlin brackets. All materials are available for immediate delivery, allowing customers to inspect them prior to purchase and begin construction quickly without the risk of advance payments. Bjdpfx Agoychpwo Nscw Our structures are hot-dip galvanized, providing the best possible corrosion protection.

Condition: used, number of spindles 4 Bcsdpfx Aot Hw U Nsg New bore capacity in steel (diameter) 23 mm bore stroke 150 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Year of construction: 2013, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER and LOADING/UNLOADING SYSTEM X-AXIS TRAVEL: 3270 mm Y-AXIS TRAVEL: 1550 mm Z-AXIS TRAVEL: 100 mm WORKING AREA: 3070 x 1550 mm ADMITTED LOAD ON TABLE: 920 Kg SOURCE: AJ2000 Fiber ; 2000 W CONTROL UNIT: AMADA AMNC3i WEIGHT: 11200 Kg Bodsvhc S Hopfx Ag Necw OVERALL DIMENSIONS: 10028 x 2900 x 2000 mm NOTE: WITH LOADING/UNLOADING SYSTEM LKI 3015FLC-AJ YOM 2013; AUTOMATIC NOZZLE CHANGE

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 540 mm, travel distance Y-axis: 240 mm, spindle speed (max.): 1,650 rpm, spindle speed (min.): 45 rpm, spindle mount: MK 4, throat depth: 350 mm, quill stroke: 130 mm, total length: 1,250 mm, total height: 1,900 mm, table width: 225 mm, total width: 1,100 mm, table length: 800 mm, drilling capacity: 40 mm, spindle nose: MK-4, nominal power: 2.2 kW (2.99 HP), Milling-/Drilling Machine, drilling capacity Ø 40 mm, motor 1,9 /2,2 KW, table size 800x225 mm, spindle speed 45-1650 rpm stepless, MT-4, el. table arising device, automatic spindle feed, coolant device, dimensions 1250x1100x1900 mm, weight ca. 600 kg Bcodpfxewt Swzo Ag Nsw

Condition: like new (used), Year of construction: 2013, cutting length 1060 mm cutting angle 2 ° no. of strokes 50 Hub/min engine output 4,0 kW weight of the machine ca. 0,67 t Motorised guillotine shears type 165.03 Technical data: Working width (cutting length): 1060 mm Max. sheet thickness to be cut: 2.5 mm at 400 N/mm² Machine stroke rate approx.: 50/min Cutting angle: 2° Opening width hold-down device: 5 mm Factory setting cutting gap 0.1 mm - Digital display for backgauge - Front table support - Operating instructions available Bsdpfx Agoua Iulo Necw

Condition: refurbished (used), Year of construction: 2002, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: 350523, Equipment: CE marking, Voltage: 380V Net weight: 1400 kg Customs tariff number: 8458.1120 Dimensions: 180x128x172 cm TECHNICAL SPECIFICATIONS CAPACITIES Maximum turning diameter: 270 mm Maximum diameter above cross slide: 115 mm Height of center above cross slide: 60 mm Turning length B32: 265 mm Center height above floor: 1,162 mm SPINDLE A2-4 / Camlock D1-3’’ Spindle for Schaublin collets: Hainbuch / F38 / B32 Spindle speed: 50–5,000 rpm AC motor drive: continuous/intermittent power: 5.5 / 7.5 kW AC motor drive: continuous/intermittent torque: 42 / 58 Nm Spindle bore (without clamping key): 39 mm Maximum bar capacity with collet: 32 mm Maximum bar capacity with automatic chuck: 32 mm PNEUMATIC CLAMPING Adjustable axial clamping force, force at 5 bars: 1,150 daN CROSS SLIDE Cross travel, X-axis: 190 mm Resolution, X-axis (radius): 0.0005 mm AC motor drive: continuous/intermittent torque: 4 / 14 Nm Ball screw, diameter x pitch: Ø 20 x 5 mm Longitudinal travel, Z-axis: 390 mm Resolution, Z-axis: 0.001 mm AC motor drive: continuous/intermittent torque: 4 / 14 Nm Ball screw, diameter x pitch: Ø 32 x 5 mm FEED RATES Working feed rates, X and Z axes, stepless: 0–5 m/min Rapid traverse, X and Z axes: 8 m/min TURRET TOOL SYSTEM Standardized toolholder mounting: VDI 20 Number of fixed/tool stations: 8 / - Maximum tool section: 16x16 mm Integrated coolant and bi-directional indexing: yes COOLANT SYSTEM Tank capacity: 55 L Pump flow rate: 10 L/min Pump pressure: 1.7 bar PNEUMATIC TAILSTOCK Bodpfx Agox Upugo Nscw Quill taper: MT3 Outside diameter of quill: 45 mm Quill stroke: 70 mm Adjustable tailstock pressure: 25–260 daN Subject to errors or omissions, all technical details are provided without commitment. Completely overhauled: Mechanics, geometry, hydraulics, and electrical parts checked and/or replaced Headstock Disassembly, parts cleaning, replacement of worn and defective parts, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, adjustment. New paint. Turret Disassembly, cleaning, replacement of worn/defective parts. New paint and face resurfacing. Tailstock Disassembled, inspected, and serviced. New paint. Hydraulic and pneumatic circuits Disassembled, motor inspected, hoses, defective and worn parts replaced. X-Axis Disassembly, replacement of worn parts such as O-rings, seals, rings. New ball screw and new sliding block. Z-Axis Disassembly, replacement of worn parts such as O-rings, seals, rings. New ball screw and new sliding block. Electrical cabinet Complete inspection, various relays replaced. Paintwork Colors: White RAL 9003 and grey RAL 7011 Geometry according to manufacturer's protocol. Various accessories checked and cleaned Year: 2002

Condition: as good as new (ex-display), FRONIUS TPS 5000 ✅ Scope of delivery: ➤Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤Fronius FK 4000 ➤Fronius VR 4000 wire feeder unit ➤Fronius intermediate hose package standard from 1.5m ➤Fronius trolley ➤Fronius hose package ➤Ground cable 3-4m ➤Pressure regulator This device can weld almost all materials, including aluminum, steel, and V2A. It features touch wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options and applications: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. We also offer the optional RCU 5000i control panel, which allows you to create and import characteristic curves to further expand the functions of the TPS device. ---- IMMEDIATELY AVAILABLE PROPER INVOICE A viewing is possible in Austria in Vienna, 1230! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? To explain, we buy like-new used devices, disassemble them, check everything, replace wear parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You are buying an item from us that is also worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when we purchase from you? Bodpfxewbknbo Ag Nocw Yes, we provide a proper invoice. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Advance payment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set well packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately do not have the flexibility to offer a warranty. You are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.