Hydraulic power chucks

WMW Niles DKRD Ø 160 mm

Condition: excellent (used), thread dia. 5 - 200 mm grinding length 500 mm thread pitch 0,25 - 6 mm clamping length max. 850 mm grinding wheel diameter 350 mm centre height 105 mm thread M2 - M149 Hsdpswvl H Uofx Aa Soff thread - inch 3/32 - 4 inch. inclination li/re +/-10 ° total power requirement 6 kW weight of the machine ca. 3,2 t dimensions of the machine ca. 2,5 x 1,7 x 1,5 m

Condition: good (used), NHH lathe Turning diameter bed: 260 mm Turning diameter support: 160 mm Spindle bore: 26 mm Turning lenght: 600 mm Heidenhain digital measurement Diameter faceplate: 155 mm Speed: 2000 RPM Hfsdpfx Aaomw Ukcj Sof Dimensions: 150x85x155 cm LxWxH

Year of construction: 1990, condition: good (used), machine/vehicle number: 3-201065, Material passage in the supply pipe max .: 65 mm for material lengths up to: 3000 mm Feed force infinitely adjustable up to max .: 550 N. Charging time approx .: 30 s Hjdpfxedlm Dho Aa Sjff elec. Connection / power requirement: 380 V / 1.5 kW Space requirement: 5810 x 920 x 1515 mm Weight: 1200 kg

Condition: used, color: yellow, first registration: 01/1995, * Manufacturer: HYSTER,* Type: H2.50XM,* Serial No.: D177B22181S,* Attachment: S/S 2.00-1.50 1067 mm,* Year of manufacture: 1995,* Drive: Diesel,* Operating hours: 18151.8 h,* Unladen weight: 4265 kg,* Reverse tilt: 6 degrees,* Tire size: 7.0 x 12 (front). 6.0 x 9 (rear),* Tire pressure: 0 (front / rear),* Track width: 1125 mm,* Lifting capacity with vertical mast and additional equipment as specified above,* Lifting height: 5550 mm,* Load capacity: 2040 kg at 500 mm, 1860 kg at 600 mm, 1710 kg at 700 mm, subject to alterations, prior sale and errors excepted. Hfsdoi Tfapopfx Aa Sef

Condition: excellent (used), Year of construction: 1995, Centre height: 330 mm Centre distance: 2000 mm Working area: Max. turning diameter over bed cover: 650 mm Max. turning diameter over cross slide: 360 mm Main spindle: Spindle diameter in front bearing: 140 mm Spindle bore: 107 mm Main drive: 58.5 kW 2-stage speed range: 4 – 750 rpm / 750 – 3060 rpm Feed drive: Rapid traverse X/Z axis: 10/10 m/min Turret: Number of tool stations: 12 Of which driven tool stations: 6 Tool shank holder: VDI 50 mm Dimensions / Weight: Hfodsx Sx Htjpfx Aa Sjf Required floor space (L x W x H): approx. 6400 x 2150 x 2000 mm Weight: 9400 kg Accessories / Special Features: • CNC path control HEIDENHAIN TurnPlus EP 90 with color display • Spindle orientation, C-axis • 12-position turret, VDI 50, including 6 driven tool stations in turret, manufacturer SAUTER, DIN 5482 B 20x17, max. speed 3000 rpm • Hydraulic 3-jaw chuck Ø 315 mm with various clamping jaws • Hydraulic tailstock with drag device • Hydraulic quill actuation • Extraction unit, manufacturer LTA • Various tool holders VDI 50 • CE-compliant In 08/2025, GILDEMEISTER service replaced the following parts: 1 servo motor, 1 AC servo controller inverter power module for 2 axes, 1 Simodrive power module, 1 line-commutated return module, 1 control insert for 1 axis, 1 controller module for 2 axes inverter servo drive, 1 Simodrive power module for 1 axis motor. Total repair cost: EUR 17,000.00 net Important note: On this very well-maintained CNC turning and milling center GILDEMEISTER CTX 600-2000 (year 1995), the positioning of the C-axis does not function and the driven milling unit rotates but does not engage. Otherwise, the machine is in perfect condition. A demonstration under power is possible at any time by prior appointment. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 1985, CNC Lathe GILDEMEISTER Type: N.E.F. 1020 Year 1985 Control EPL 2 Turning diameter over bed : 1020 mm Hfsdpfx Aeqc Ul Asa Sof Turning diameter over face plates : 600 mm Turning length : 3000 mm Spindle speed : 5 - 1120 rpm Motorl.30 KW Spindle bore : 128 mm Tool turret Parat size : 4 with 10 holders Faceplate : 900 mm, steady rest, drill stand, chip conveyor, complete machine documentation and parameters available. Machine disassembled in stock. Complete weight approx. 12 000 KG. Further data see data sheets .

Condition: good (used), Year of construction: 2007, 1 x loading magazine LNS Sprint 555 Year of manufacture: 2007 Bar processing D: 5 - 55 mm Bar length: 3,200 mm Previously attached to a Goodway CNC lathe. The loading magazine can be viewed at any time at our warehouse in Reichenbach Hfedpfx Aevt N Dyea Sof

Condition: used, TECHNICAL DETAILS - Max. diameter : 68 [mm] - Tubes number : 6 - Max. bar length : 4400 [mm] Hjdpfouhbkcox Aa Ssff EQUIPMENT - Hydraulic tank

Condition: good (used), Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Double miter saw: Saw unit right and left -Saw unit: swivels 45° -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: Ø 420 x 30 mm -Price/Fee: complete -Overall dimensions: 1200/800/H690 mm -Total weight: 234 kg Hfodpfx Aaegylq Ij Sjf

Condition: used, TECHNICAL DETAILS - Mini/maxi diameter : 5 - 42 [mm] - Bar length : 3 200 [mm] - Stroller diameter : 14 [mm] - Channel diameter : 15 [mm] - Supply : 3x400 V, 50 [Hz] Hsdpfouhbilsx Aa Ssff