Bolster plate

WMW AP 7200x2300x330

Condition: good (used), grinding diameter: 1,600 mm, grinding length: 6,000 mm, Manufacturer: CINCINNATI Type: 60 x 216 Year of manufacture: 1970 Covex and Concave grinding 6 steady rest included 2 steady rest hydrostatic Coolant system with magnetic filter Measuring system with 5 arms caliber: Arm 1: Working area 1300 to 1600 mm Arm 2: Working area 1000 to 1300 mm Arm 3: Working area 700 to 1000 mm Arm 4: Working area 400 to 700 mm Specifications Metric US Standard Center height 787 mm Grinding diameter Ø Njdpfx Asvvvw Eea Dswb 1574 mm Grinding length 5800 mm Grinding stone dimensions 914 x 101.6 x 304.50 mm Grinding stone speed 1800 rpm Dimensions (estimate) Length 15100 mm Width 5500 mm Height 3550 mm Weight 120000 kg Please note: The information on this page is correct to the best of our knowledge and belief and, where possible, has been obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: good (used), Year of construction: 2009, Ref. -No.: 10616 Manufacturer: DMG Type: DMU 210 P Year of construction: 2009 Type of control: CNC Control: Heidenhain ITNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 257XXXX X-Travel: 1800 mm Y-Travel: 2100 mm Z-Travel: 1250 mm B-Axis: -30 / +180 ° C-Axis: 360 ° Table Load: 8000 kg Clamping Area: 1.700 mm Tool Taper: SK 50 Spindle Speed: 10.000 RPM Max. Torque: 288 Nm Total Power Requirement: 38 kW No. Of Working Stations: 60 Internal cooling: 40 bar Holding torque: 22.700 Nm Further information: Nwodpfx Aaox R R Hcj Dsb - The DMG DMU 210 P 5-axis machining center is suitable for high-precision machining of large, heavy workpieces. The machine can be viewed under power.

Condition: used, functionality: fully functional, power: 27 kW (36.71 HP), total length: 1,680 mm, total width: 1,250 mm, total height: 1,390 mm, Year of construction: 2013, operating hours: 577 h, input frequency: 50 Hz, shaft diameter: 105 mm, feed length X-axis: 265 mm, type of input current: three-phase, Equipment: emergency stop, rotational speed infinitely variable, The PBT25 with automatic radius measurement—the absolute all-rounder in our product range. This powerful and precise bending machine impresses with maximum flexibility and ergonomics. The infinitely adjustable front roller spacing from 200 mm allows for the smallest radii with perfect transitions. Thanks to the PC300 software, re-bending becomes effortless. Three powerful, low-noise electric motors drive the rollers at up to 22 rpm, ensuring the highest precision. Standard roller supports on all three shafts provide optimal stability. For more information, visit the official PBT AG website. Nwsdowm N Epepfx Aa Dsb

Year of construction: 2016, condition: reconditioned (used), functionality: fully functional, overhauled, delivery time by end of January 2026, 12-month warranty - Max. temperature 200°C; temperature can be increased to 250°C upon request - Internal dimensions: W 1000 x D 1000 x H 1500 mm - External dimensions: W 1765 x D 1425 x H 2300 mm - Equipped with Jumo Dicon Touch controller - Loading rails for charging the oven Nedpfxsvk Navo Aa Dowb - Heating capacity: 36 kW - Net weight: 780 kg - Exhaust nozzle; exhaust fan and electric damper can be retrofitted upon request - Charging trolley available on request (see photo) - Documentation, CE declaration We are happy to offer installation and commissioning as an additional service. Inspection by appointment in our warehouse. Oven, ovens, drying oven, kiln, heat oven, heating cabinet, industrial oven, tempering oven, pre-heating oven, tempering oven, drying cabinet, chamber kiln, curing oven, recirculating drying cabinet, recirculating oven

Condition: good (used), Drying oven for uv line Nodet Ag Uqopfx Aa Dewb

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. Nsdel Dw D Espfx Aa Dewb The first station of the SER600 consists of a grinding unit. The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Condition: used, 5tSWF Krantechnik GmbH Nodpfx Asdc A R Tja Dewb

Condition: new, Year of construction: 2024, pressure: 8 bar, Miter setting horizontally 15°- 90°15° infinitely variable saw motor 5.50 KW (400 volts) saw blade 600 mm traversing range rear stop 180 mm working height 940 to 1000 mm adjustable via feet 2 x suction nozzles (above in the hood and below) net weight 600 kg WxDxH 135x140x150 cm RAL 9007 gray aluminum rotary plate polished nickel steel Saw head with recirculating ball guides designed with high accuracy and long service life and high rigidity. Sawing material can be preloaded with low pressure when the hood is open. Hydropneumatic sheet feed Chip flow towards the extraction hood. Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system Othgf Nwsdegwt S Tepfx Aa Dob • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 230 mm Hxdcvds7y • Saw blade 600mm • Saw blade not included! Our NC pusher system ensures that your machining parts are positioned at the desired machining position on our UK 600 HA 90°. A gripper clamps the material, the NC control positions the material automatically. The tension and the sawing process are then triggered. The positions are previously programmed into the program control. Once the machine tool has completed your machining, it automatically moves to the next sawing position. Depending on the processing part, several parts can also be clamped on top of each other/next to each other and positioned at the same time. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Year of construction: 1985, condition: used, workpiece diameter 25-90 mm Nsdpfxstzdyze Aa Djwb threading length 3000 mm thread pitch 2-16 mm total power requirement 25 kW weight of the machine ca. 10,5 t dimensions of the machine ca. m

Condition: used, plate width 2510 mm plate depth 5135 mm plate height 345 mm weight ca. 10 t Nwodshpvavspfx Aa Djb required space 2,5 x 5,1 x 0,38 m