20-29-551 Brush sanding machine

WOODLAND MACHINERY DTW-120A

Condition: not inspected (used), Working length max. 400 mm Working width max. 150 mm Wood thickness max. 25 mm Hydraulic motor 2,2 kW Fedpjk Tyrwsfx Ag Rsft 2 milling motors à 2,2 kW Spindle speed 12.000 rpm. Frequency converter 8 kVA, 200 Hz Weight ab. 1200 kg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Fully working UniControl 12 year 2006 from Norway - for exact technical specification please open attached document in PDF below. Cross section UniTec 12: - saw unit - edge round cutter from bottom - Hubspindel no.1 - Hubspindel no.2 - Hubspindel no.3 Long , profile section UniVar 12: - Profil cutter - Profil cutter - Profil cutter horizontal - Profil cutter - Profil cutter - Profil cutter Total el power 114 kw 400 V AC Need for suction 270 m3/min Need of compressed air 1000 L/ minMachine was in use until 15.08.2023 Payment: Prior to loading Delivery: ex. factory Rendalen - Norway Machine is located in Norway ( near to Trondheim) Ffsdpfxomgc I Ne Ag Rst The machine is now disconnected, stored in dry and warm wearhouse, and are ready to be shipped. Rekman Maskin & Service - service of woodworking machines since 1986.

Condition: good (used), Year of construction: 2013, Panel saw Felder K 975 Cutting length: 3200 mm Cutting width: 1350 mm Max. cutting height: 130 mm (saw blade diameter: 400 mm) Saw blade and scorer tilting: 0-45° digital Ffodpfxoxl Dw Ue Ag Ret Saw blade and scorer height adjustment: digital Manual adjustable rip fence Activation of main saw blade and scorer from control panel and/or machine table Main motor for panel saw: 5.5 kW (7.5 HP) (adjustable 3500/4500/5500 rpm) Scorer motor for panel saw

Condition: not inspected (used), Year of construction: 1984, Turning length max. 1200 mm turning Ø max. 250 mm 2 hydraulic scanning supports Ffjdpfxsp Dt Twj Ag Rot spindle motor 5,5 kW hydraulic motor 2,2 kW

Year of construction: 2003, condition: excellent (used), machine/vehicle number: MBUT136, ! bargain price ! Price from 1150 euros R. Stahl 1-girder suspension crane, bridge crane, crane track, indoor crane, gantry crane Payload 250KG 7 cranes available: 4: Steel suspension crane NL 250KG, width 6.35m, track width 5.6m 5: Steel suspension crane NL 250KG, width 2.65m, track width 1.9m 6: Steel suspension crane NL 250KG, width 4.85m, track width 4.35m 7: Steel suspension crane NL 250KG, width 2.90m, track width 2.35m 9: Steel suspension crane NL 250KG, width 6.0m, track width 5.5m 10: Steel suspension crane NL 250KG, width 1.03m, track width 0.74m (1150 euros) 11: Steel suspension crane NL 250KG, width 1.65m, track width 1.25m Track width can be changed, end carriers are screwed with 8 screws. Tracks (IPE 200 - not available) Undercarriages can be adjusted to the carrier dimensions. incl. complete control, floor operation by means of a control bottle All cranes can be moved electrically in all 3 axes Lifting height/hook path approx. 4m Connection to 400V 16A, year of construction 2003 Very good condition, systems were only used for maintenance - hardly used Shipping by courier, collection preferred Ffedpfx Asigl R Rjg Ret Location 75053 Gondelsheim Please ask for shipping prices according to zip code, we will make you a non-binding offer immediately!

Condition: new, Year of construction: 2024, pressure: 8 bar, Miter setting horizontally 15°- 90°15° infinitely variable saw motor 5.50 KW (400 volts) saw blade 600 mm traversing range rear stop 180 mm working height 940 to 1000 mm adjustable via feet 2 x suction nozzles (above in the hood and below) net weight 600 kg WxDxH 135x140x150 cm RAL 9007 gray aluminum rotary plate polished nickel steel Saw head with recirculating ball guides designed with high accuracy and long service life and high rigidity. Sawing material can be preloaded with low pressure when the hood is open. Hydropneumatic sheet feed Chip flow towards the extraction hood. Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system Othgf • Mist spray device for air-oil cooling • Air gun with spiral hose Fjdegwt S Tspfx Ag Rjft • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 230 mm Hxdcvds7y • Saw blade 600mm • Saw blade not included! Our NC pusher system ensures that your machining parts are positioned at the desired machining position on our UK 600 HA 90°. A gripper clamps the material, the NC control positions the material automatically. The tension and the sawing process are then triggered. The positions are previously programmed into the program control. Once the machine tool has completed your machining, it automatically moves to the next sawing position. Depending on the processing part, several parts can also be clamped on top of each other/next to each other and positioned at the same time. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Year of construction: 2006, condition: good (used), Power generator, emergency power generator, generator, power generator, power generator, emergency power generator Fedpfxecgan Ao Ag Rjft -Soundproofed -Power: 7.0 kVA 50 Hz -Petrol engine: Honda -2x: Schuko 230 Volt -1x: 380 Volt power outlet -1x: Charging cable, 12-volt socket -Dimensions of unit: 590/780/H750 mm -Weight: 136 kg

Condition: excellent (used), Line for door jambs (frames), with END-CUTTING, ROUTERING for COUNTER-PLATE and HINGE INSERTION (Anuba). Composed of: X10030A) Loading Conveyor X10030B) Transfer Conveyor Fjdpfxsqwycls Ag Rsft X10030C) Double-end cutting and drilling machine "AMS" - Left-side Cutting 45° - Drilling - Cutting 90° - Right-side Cutting 45° - Drilling X10030D) Angular Conveyor (90°) X10030E) Anuba Inserting Machine "MASTERWOOD" Mod. MULTITEC X10030F) Strike Plate Routering Machine "MASTERWOOD" Mod. Teknomat 3000

Condition: as good as new (ex-display), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: Fodpedt Rgvefx Ag Rsft VZ0200A) Gantry-portal Loader (Double pick-up station) "BARGSTEDT" Mod. TBH 500/D/30/12 VZ0200B) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 525/8/A3/15 VZ0200C) In-feeding Rollerway "HOMAG" Mod. TDL 310/30/12 with 90° Turning device (from lenghtwise to crosswise) with double cone system VZ0200D) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 526/10/A3/30 VZ0200E) In-feeding Rollerway "HOMAG" Mod. TDL 510/25/12 with 90° Turning device (from crosswise to lenghtwise) with double cone system VZ0200F) Cleaning machine "WANDRES" VZ0200G) Gantry-portal Stacker (Double pick-up station) "BARGSTEDT" Mod. TSP 410/D/25/12

Condition: excellent (used), UNLOADER (SINGLE-CAGE) Fedpfxscggy So Ag Rjft - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 10