CUTTING PLOTTER

ZÜND P-1200 PLUS

Condition: used, Year of construction: 1991, HEIDELBERG GTO 52-2 ZPN Numbering preparation 1991 vintage , numbering preparation, good cylinders, no damage, Fjdsrllcispfx Addogk documentation, tools.

Condition: used, Year of construction: 2024, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Fjdpfx Asif Ek Roddjgk Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Max speed: 8,000 sheets/hour Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons Fjdpfx Adewypp Iodsgk - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline System - Micrometric system - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste - Sheet deceleration device - Tab insertion device

Condition: new, machine/vehicle number: 280270 0001, ADVANTAGES: compact table machine simple operability 3-axis stepper motor control with path operation Ball screws 2-phase stepper motors CNC control software included ICP series - with stepper motor drive and path control GENERAL CNC machines of the ICP series are further developments of the proven CPM series. The introduction of a sliding door means that the machines can now be operated from a seated position, which results in shorter cycle times for hood opening, among other things. The chassis is completely bolted together instead of welded as in the predecessors. This results in greater precision when setting up the machine, as well as improved serviceability. Furthermore, the resonance and vibration behavior has been optimized, resulting in lower noise levels. X = 400mm Y = 300 mm Z = 140 mm Diffuser = 200 mm -in use for over 40 years!!! -over 20,000 systems sold. HIGHLIGHTS compact table machine simple operability Fedpolkbpzofx Addegk 3-axis stepper motor control with path operation Ball screws 2-phase stepper motors CNC control software included Mosaic Safety Circle POPULAR MATERIAL Foam Plastics ACCESSORIES Length gauge Spindles (iFM1000ER, iFM1000WS) Quick clamping system Spannzangen Suction device

Condition: new, Year of construction: 2025, HEAD AND TAIL BAND MACHINE Fsdpeh S Uv Ejfx Addegk MAGRAF KV-10 PLUS

Condition: excellent (used), Volt: 220-240VAC // Amps. 1.8 // Hz: 50/60 // Ph: 1 // Kw: 0.4 WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap. The Stenz Feeder is thus not restricted in throughput - A minimum of wearing parts for extremely long service life - Already approved in thousands of different print machines - A Swiss quality product - Designed by printers for printers. Specifications: Speed: Limited by print machine Length: 115 cm Width: 50 cm Height: adjustable between Max. format size: 36.5 x 35 cm Max. pass-through width: 36.5 cm Fedpjh Eibaofx Addogk Electrical: 230 V, 50 Hz

Condition: like new (used), Year of construction: 1995, machine/vehicle number: 110951103061440, Thieme semi-automatic 1010, built in 1995 reconditioned machine, very good condition, like new! Thieme squeegee unit Fsdpfxevrzv So Addsgk Print height: max. 50 mm Print format max. 500 x 560 mm Outside frame: 1000 x 1100 mm Print table: 800 x 1000 mm 23Hgnqhag Performance: 1350 pcs./h Electric/compressed air: 400/230 V / 12 A, 50 Hz / 6 bar Dimensions 1.7m X 2.3m H=1.6m 1200 kg

Year of construction: 2024, condition: new, In set 1. duplex rewind 3”. 2. rotary shear knife slitting. 3. Unwind diameter 600mm. (Also available with Max. unwinding diameter - 1000 mm) 450 is a automatic slitting machine is mainly designed for slitting label rolls and other materials. It also could slit general paper and film rolls. 1. The machine has features of compact structure, high speed, high efficiency, easy operation and steadily running. 2. Main motor with France Schneider frequency converter to control step-less speed. 3. The machine adopts Japan and Taiwan pneumatic technique. Fjdpjg I Dq Tsfx Addjgk 4. EPC with two photoelectric sensors, guarantee driving in high precision. 5. Magnetic powder brake for unwinding tension control and clutch for rewinding tension control. 6. It has function of meter-reached auto stop and quantity-reached auto stop function. Specifications: Max. web width - 450 mm Max. unwinding diameter - 600 mm (Also available with Max. unwinding diameter - 1000 mm) Unwinding tension control - Magnetic powder brake Web guiding system - Photoelectric eye sensor (2 pcs)EPC Slitting technique - Circular knife (10 pieces) Min. slitting width - 25 mm Slitting speed - ≤120 m/min Trim disposal - Trim reject fan (0.75kw) Precision of slitting - ±0,10 mm Max. rewinding diameter - 480 mm Rewinding tension control - Magnetic powder clutch (2 pcs) Rewinding inner core diameter - 76 (3”) (other size is optional) Power supply - 220V/1ph/50Hz Main motor power - 2,5 kw Net weight - 600 kg Overall dimension - 1100 x 1030 x 1300 mm

Condition: excellent (used), Here we offer Mitsubishi industry 6 axis articulated arm robot. Mitsubishi Industry 6-Axis Articulated Arm Robot 6-axis jointed-arm robot RV-3SDB-S15 The RV-3SDB jointed-arm robot The RV-3SB robot is specially designed for handling loads up to 3.5 kg. suitable. The IP 65 standard encapsulation ensures that the robot can be used an operation under extreme conditions. Special features: Axis softness adjustment for Fsdpfxjd H E H Uj Addegk workpiece tolerance compensation Conveyor belt tracking sensorless collision detection encapsulated design adaptive speed optimization Feature/Function degree of freedom (number of axes) 6 Standard version (oil mist) Mounting: floor, wall or ceiling mounting possible (wall mounting with restriction in J1 axis) Construction: vertical articulated arm Drive system: AC servo (all axes with brake) Position detection: Absolute encoder Range of motion: degrees Body (J1) 340 (-170 to+170) Shoulder (J2) 225 (-90 to+135) Elbow (J3) 191 (-20 to+171) Forearm rotation (J4) 320 (-160 to+160) Wrist tilt (J5) 240 (-120 to+120) Wrist rotation (J6) 720 (-360 to+360) Movement speed:degrees/s Body (J1) 250 Shoulder (J2) 187 Elbow (J3) 250 Forearm rotation (J4) 412 Wrist tilt (J5) 412 Wrist rotation (J6) 660 Resulting maximum speed 5500 mm/s Lifting force Nominal value 3kg Maximum value 3.5kg Reach radius (to the pivot point of the J5 axis) 642mm Weight: 37kg Robot controller CR1DA-721-S15 (230V) Teachbox R46TB with color/touch display Technical data: Dimensions (W × H × D) 252 × 240 × 114 mm Weight 1.250 kg Connection type: Connection to robot controller with circular plug,cable length 7 m Interfaces: RS422 For connection to the robot control Display/Screen: Touch-sensitive 6.5" TFT monitor with backlighting and and 640 × 480 pixel resolution, the touch screen can be operated with fingers or stylus. touchscreen. Type: Mitsubishi Melfa RV-3SDB-S15 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: S36-0685, (engraving, cutting) With Rip and extraction system (S. No.: 01422-11122) Laser type: CO2 Fgodpsxcalvsfx Addsk Working area (W x D): 813 x 508 mm CO2 laser power: 80W, 120W Fiber laser power: 30W, 50W Max. engraving speed: 3.55 m/s Operating mode: Optimized modes, including raster, vector and combined