Shredder

ZERMA ZSS 850

Condition: new, Year of construction: 2021, operating hours: 4 h, functionality: fully functional, machine/vehicle number: ZSS8501604002, overall weight: 4,290 kg, rotor diameter: 387 mm, number of blades: 40, rotor length: 850 mm, rotor width: 457 mm, power: 40.75 kW (55.40 HP), type of input current: three-phase, rotational speed (max.): 80 rpm, rotational speed (min.): 74 rpm, year of last overhaul: 2025, sieve perforation: 60 mm, warranty duration: 6 months, input voltage: 400 V, Single-rotor shredder ZERMA ZSS 850-E 37 kW Hopper opening (mm): 1340 x 840 mm Usable cutting chamber: 690 x 730 mm Rotor diameter x width (mm): Ø 387 x 850 mm Rotor speed: 80 rpm Rotor model: E SEW oil-bath gearbox: Included Gujdpfx Aextp Dioh Dek Number and size of knives: 40 / 34x34x22 mm Knife holders with bolts: Included Number of counter-knives: 1 row of 3 IE3 motor power: 37 kW Screen perforations: > 40mm (to be specified) Hydraulic screen opening: Included Discharge height: 560 mm Connected electrical power: 400 V +/- 5% / 50 Hz Hydraulic pusher power: 3.6 kW Hydraulic pusher with 2 speeds: Included Adherent front plate (ram): Included Air/Oil heat exchanger mounted on hydraulic tank Overall length: 2085 mm - Overall width: 1940 mm - Height: 2435 mm Approximate weight (kg): 4400 kg Control cabinet with SIEMENS PLC and settings menus such as: Recipes, Maintenance, Alarms, etc. Cable length to control cabinet: 5 meters See technical datasheet and/or attached diagram for more details.

Condition: used, Year of construction: 1991, total length: 1,520 mm, total width: 720 mm, power: 30 kW (40.79 HP), Fully overhauled, lubricated, and ready for operation. Automatic two-shaft hydraulic shredder designed for crushing and disentangling metal chips, plastics, wood, electrical cables, and other materials. It is controlled by a PLC that monitors sensors, manages shaft rotation, and automatically activates the reverse function, if several blockages occur within a short period, the shredder shuts down. In addition, the unit automatically switches off after a set period when operating without load. Technical Highlights: Power 30 kW Max hydraulic pressure: 250 bar Torque: 11,780 Nm 2 crushing shafts with blades Hydraulic drive with gear transmission (Valmet BB 3150CC) Godpswk Egwofx Ah Deuk Automatic blade pressure adjustment (disc spring system)

Condition: ready for operation (used), Four-side planer constant table Planing width max. 605 mm Planing height two-sided: 200 mm Planing height four-sided: 170 mm Planing spindles with 6 knives For feed speeds up to 24 m/min, 3 knives are sufficient Gjdpfx Ahswg S Tvo Deuk 3 knives are in operation; 3 sharp knives are in standby position Additional unit: 5th working spindle, horizontal, 11 kW Extraction unit, roller width 350 mm Option: Pre-planer at machine infeed

Condition: used, Double-shaft shredder Drive 37.50 KW Gujdpfexgtcvjx Ah Dok

Condition: excellent (used), Dimensions: 5000x 360mm Gujdpfshink Dox Ah Dek Quantity: 1 piece Price/piece

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 5 h, functionality: fully functional, Brush sanding machine Manufacturer: Cosma Model: 300 H4 C Year of manufacture: 2023 (demonstration machine with warranty!) Brush machine for four-sided sanding of mouldings, scaffold boards, profile timbers, etc. Gedjwkqmpspfx Ah Dsuk Working height: 900 mm Working width for four-sided sanding: 300 mm 2 cylindrical brush units (top and bottom), each 2.2 kW, 1000 rpm. 2 lateral disc brush units, each 0.37 kW, 750 rpm, swiveling Manual height adjustment of the units Feed speed adjustable, approx. 2 - 10 m/min. Control panel: - Brush on/off - Feed speed control Product dimensions: Minimum product length: 800 mm Maximum product width: 300 mm Height: 20 - 100 mm

Condition: good (used), Year of construction: 1983, functionality: fully functional, max width of workpiece 180mm max height of workpiece 120mm 4 spindles: Guedpfx Aeqwg Ansh Dek 1) horizontal bottom 180mm 3,7kW 2) vertical right 120mm 4kW 3) vertical left 120mm 4kW 4) horizontal top 180mm 5,5kW diameter of spindles 30mm

Condition: used, Vacuum pump used for Homag/Weeke current supplier: Nash Elmo Gujdow I U Taspfx Ah Dsk function-tested Motor 3.85 kW Minimum suction pressure 30 mbar Speed 3850 rpm with enclosure Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 1996, functionality: fully functional, overall weight: 24,000 kg, rotor diameter: 620 mm, number of blades: 30, total length: 6,300 mm, total height: 2,430 mm, total width: 4,700 mm, rotor width: 2,491 mm, power: 200 kW (271.92 HP), type of input current: three-phase, rotational speed (min.): 150 rpm, filling opening width: 2,495 mm, filling opening length: 3,190 mm, input voltage: 380 V, Vecoplan VAZ 300/250 UNF This machine is still in operation and will be available on October 20th. For more information, please contact us. Guodpfx Asxlm Treh Dek

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, ASSEMBLY UNIT PROGRAMMABLE ASSEMBLY FENCE 0-5MM AUTOMATIC MAGAZINE FOR EDGE BANDING ROLLS AUTOMATIC MAGAZINE FOR SOLID EDGES CUT-OFF KNIFE FOR EDGE BANDING ROLLS PROGRAMMABLE PRESSURE ZONE WITH 1 PRE-PRESSURE AND 5 POST-PRESSURE ROLLERS GLUING UNIT, FLUSHABLE FOR PU ADHESIVE LINEAR CUTTING UNIT, SWIVELABLE FLUSH MILLING UNIT 2X1.9 KW RADIUS MILLING UNIT RADIUS SCRAPER COPY MILLING UNIT WITH 2 MOTORS Gusdpfx Aev I Saysh Dek SURFACE SCRAPERS TOUCHSCREEN CONTROL PANEL EDGE THICKNESS UP TO 20MM MACHINE LENGTH 7.90 M