Die-sinking edm

Zimmer & Kreim PEC 850

Condition: good (used), Year of construction: 1994, functionality: fully functional, Technical details table length 840 mm table width 600 mm ampere 60-120 A total power requirement 15-23 kVA weight of the machine ca. 2,75 t dimensions of the machine ca. 2760 x 1110 x 1840 m Additional information With controlled C-axis and 16-position tool changer. WORKTABLE Table size: 840 x 600 mm Dielectric above table: 360 mm Maximum workpiece weight: 1000 kg T-slots: 4 x 10 mm Distance table to quill without chuck (max / min): 595 / 180 mm WORKHEAD X - Y travel: 565 x 400 mm Z travel: 415 mm X - Y - Z resolution: 0.001 mm Chedpfoxzt Tdox Addsf C-axis resolution: 0.001 deg. Rapid traverse speed: 800 mm/min Max. electrode weight without rotation: 100 kg Max. electrode weight with rotation: 15 kg DIELECTRIC SUPPLY Tank volume: 400 liters Paper candle filters: 4 pieces GENERATOR Dimensions (height x width x depth): 1800 x 600 x 920 mm Weight: 300 kg Rated current: 60 – 120 A Power rating: 15 – 23 kVA Dimensions (height x width x depth): 2760 x 1110 x 1840 mm Weight: 2750 kg

Condition: excellent (used), Year of construction: 2023, Electrode changer: X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): CNC Type: Worktank length: Worktank width: Worktank height: Table length: Table width: Max. workpiece length: Max. workpiece width: Max. workpiece height: Max. workpiece weight (kg): Max. machining current (A): Cedpfewnfcgjx Addehf Length x width x height: Weight (kg): Worked power hours: The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change.

Condition: excellent (used), Year of construction: 1996, Control: CNC path control incl. screen ZIMMER + KREIM TECHNICAL DATA Traversing range X-axis 570 mm Y-axis 400 mm Z-axis 415 mm C-axis 360 Resolution X, Y, Z 0.001 mm C 0,001 angular degree table clamping area 840 x 600 mm Dielectric over table 360 mm 4 T-slots 10 mm table load max. 1000 kg Distance table - quill 620 mm Automatic electrode changer Number of electrodes 50 Cedpfx Adehq A T Aedshf Electrode weight - without rotation 100 kg Electrode weight - with rotation 15 kg Rapid traverse 800 mm/min EQUIPMENT/ACCESSORIES Pallet changer 6-fold Automatic electrode changer 50-fold C-axis ADAPTI MAT 04 - monitoring and regulation device PEG 90 - generator chuck EROWA IST with 3 receptacles Machine light Electronic handwheel Cooling unit for dielectric Automatic CO2 extinguishing system C-Box Zimmer + Kreim Purge distributor 14-fold Purge volume controller 15-fold 1 pallet pick-up system UPC 2 pallets Set-up elements Documentation

Condition: like new (used), functionality: fully functional, How do you do? Chedpfxjvby U Sj Addef We are offering used and compatible clamping devices from Erowa. These are suitable for die sinking and milling. Here are some of the available parts: ER-008617 Plug gauge ER-010723 Control mandrel ITS 50 ER-010561 Replacement probe pin ø 2mm ER-010560 Replacement probe pin ø 5mm ER-093992 Square 25 holder C F-Tool holder with square 25 ER-010592 Square 25 Alignment ruler ER-010495 Square 15 alignment ruler ER-129072 Uniplate Collet holder ø 72 ER16-ER50 Table probe with magnetic base 3D probe ø1-5 Steel pallet ø148mm All parts have been cleaned and checked by us. A functional test was also carried out. Spare parts are available. Do you have any questions? Then please do not hesitate to contact us.

Condition: used, Year of construction: 2008, operating hours: 5,900 h, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, Wire Diameter 0,1-0,3 mm Automatik Threading Working Hours 5900 Std Verfahrwege X 350 mm Y 220 mm Chedpfx Aowzyr Aoddsf Z 220 mm U 350 mm V 220 mm Year 2008

Condition: like new (used), Year of construction: 2006, operating hours: 33,107 h, functionality: fully functional, Top machine from clean room production (pharmacy) - with turntable 820 mm - with GEKU robot SR 500 ST x=600 y=1400 z=2500 mm - only 33,107 operating hours - Protective housing/ protective cage - Horizontal conveyor belt - hardly any paint damage / almost new condition - fully functional The machine can be inspected under power by arrangement Technical data Manufacturer Engel Type V 330H/80V/130 Combi Serial number 162036 Year of manufacture 2006 Operating hours 33107 h Dimensions L/W/H see drawing Weight 10600 kg Functionality full Condition excellent Cedpfx Adoub Umqjdohf Special Control unit CC 200 Screw ⌀ 25 / 22 mm Injection weight 72/ 35 gr. Injection pressure 2391/ 2066 bar Injection volume 79 / 38 ccm Clamping force 1300 kN/ 130 to. Tie bar spacing: tie barless Ejector stroke/force 61 kN/ 100 mm Hydraulic clamping unit Motor power follows Heating power follows Total output follows The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Extras Turntable (820 mm diameter) Geku Robot SR 500 ST Protective housing / protective cage CC 200 German English language GEKU Robot details SR 500 ST Simotion control X-axis: 600 mm Y-axis: 1400 mm vertical Z-axis: 2500 mm horizontal A-folding axis: SWM 45 C-axis : Servo Gripper: SWS16 B-axis: not available Guarantee Warranty until first commissioning Loading/shipping Free loading on the buyer's truck or free delivery against freight reimbursement from our warehouse in Hanover /Germany Financing - On request - Hire purchase option Price on request

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 530i, table width: 870 mm, table length: 3,500 mm, table load: 3,500 kg, rotary table diameter: 800 mm, overall weight: 24,000 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle motor power: 22 W, spindle nose: ISO 40, number of slots in tool magazine: 60, tool length: 300 mm, tool diameter: 76 mm, tool weight: 8 g, input voltage: 400 V, Equipment: documentation/manual, Used 5-axis universal traveling-column machining center with Heidenhain TNC-530 CNC, Cedpfxexixn Nj Addjhf swivel head, integrated rotary table.

Condition: used, table length 400 mm Chsdpfx Asvwgq Sjddsf table width 300 mm x-travel 300 mm y-travel 250 mm z-travel 250 mm weight of the machine ca. 1,2 t dimensions of the machine ca. 2000 x 1200 x 2500 mm

Year of construction: 1995, condition: good (used), ARD EDM diesinking machine offered. Type: M 50 F Control unit: ARD system Facile A X-travel: 310 mm Y-travel: 200 mm Z-travel: 200 mm Bed: 360 x 600 mm Power: 5,5 KVA Chodpfxehktttj Addsf Spindle type: System 3R Spindle stroke: 200 mm Year: 1995 Dimensions: 150x135x210 cm LxWxH For more information call us or send an e-mail.

Year of construction: 2012, condition: ready for operation (used), There are three Concept Laser M1 3D printers available, year of construction machine 1/ 2/ 3: 2009/ 2010/ 2012, operational hours counter machine 1/ 2/ 3: 82,046/ 93,781/ 68,167h, with Laser Rofin StarFiber 200, water cooling, screening machine and documentation, at machine 1 the laser is broken and the machine is without optics, machine 2 is fully functional, machine 3 is fully functional, but a machine software error occurs regularly, which has to be fixed, afterwards production can always be continued, an inspection is possible, Cjdpfsnr Nr Hjx Addshf