Tool presetter

ZOLLER H 320 Sk 30

Condition: used, Year of construction: 2014, power capacity 3 kW feed pressure 7 bar liter capacity / l weight 286 kg Chicago Pneumatic CPVR15 CE screw compressor - Year of manufacture 2014 The CPVR15 CE impresses with its robust design, long service life and low operating costs. Whether in workshops, workshops or industrial applications - this compressor reliably supplies you with the compressed air you need. Klsdpfjh A Sfdjx Adwel Drive power: 3 kW Delivery pressure: 7 bar Air output: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50-58 dB(A) Voltage/frequency: 415 V / 50 Hz Application: Workshops, craft businesses, industrial applications with medium compressed air requirements Included in delivery: 1x compressor - Chicago Pneumatic CPVR15 CE 1x refrigeration dryer - OMI ESD 108 - 0.70kW 1x Beko Öwamat 2 - oil-water separator Technical data was taken from publicly available sources

Condition: new, New hydraulic high speed press from min. 300t up to max. 2500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your needs. Give us your requirements and we will make an attractive offer with installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be official sales partner since 2020 and look forward to hearing from you. Klodpfxef Rt Irj Adwel

Condition: used, Tool presetter EZSET EZ400 Kljdeuhb Stepfx Adwol

Condition: used, Year of construction: 1994, functionality: fully functional, throat depth: 1,250 mm, Radial drilling machine Fab. Breda type. R 55-1250 Year of manufacture 1994 Technical details Make: BREDA Type: R 55-1250 Throat: 1250 mm Drilling capacity in steel: 55 mm Drilling capacity in cast iron: 70 mm Tapping capacity in steel: M 50 Tapping capacity in cast iron: M 65 Drill spindle mount: MT 5 Throat: 1250 mm Cross travel of headstock: 930 mm Minimum/largest distance from base plate: 5360 – 1375 mm Vertical travel of the boom: 705 mm Spindle stroke: 310 mm Number of spindle speeds: 12 Spindle speeds: 30 – 1200 rpm Number of feeds: 8 Feeds: 0.06 – 1.0 mm/rev Base plate 2070 x 910 mm Clamping area base plate 1325 x 910 mm Motor power 4.4 kW - 380 volts Dimensions (L x W x H) 2.1 x 1.0 x 2.5 m Weight 3 t Accessories Drilling table 750 x 600 x 550 mm Cooling Hydraulic clamping All information is subject to change. Klodpev Rpf Ssfx Adwel A demonstration is available at any time in our showroom.

Year of construction: 2009, condition: used, Technical details: tool taper: Ø 54 voltage: 3Ph AC 400V / 50-60 Hz V / Hz compressed air: Anschluß: 6 bar total power requirement: 11 kW Total weight, approx.: 120 kg dimensions L x W x H: 0,7 x 0,65 x 1,7 m Application: for secondary quick tool change through targeted inductive heating. Induction shrink fit unit with water cooling (tank 30 litres, built into the housing) Cooling medium: emulsion for Ø 3 - 50mm HM (carbide) and Ø 6 - 50 HSS tools Tool holder Ø 54mm Kedpewp I S Hsfx Adwoll Concentricity < 0,003mm ThermoGrip chuck Operation via control panel *

Condition: good (used), Year of construction: 1997, TBT ML 200-2-850 deep hole drilling machine TECHNICAL DATA Type: M200-2-850 Number of spindles: 2 Drill carriage stroke: 850 mm Drilling method: Single-lip drilling Drilling depth with: Submersible spindle: 120 mm Sealing housing: 400 mm Sealing housing with bezel: 350 mm Spindle drive Power: 2 / 3.5 / 1.5 kW Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Feed - own drive Feed speed: 20 - 500 mm/min Rapid traverse speed NC operation: 12 m/min Feed force: 1.5 kN Motor power: 2.2 Nm at 3000 rpm Clamping tailstock Motor power: 0.75 kW at 1000 rpm Spindle speed: 500 rpm Stroke max: 200 mm Main dimensions L x W x H: 4600 x 2500 x 2100 mm Transport weight: 3200 kg Klsdpfevca Rcex Adwel Control: Sinumerik 805 M No liability is assumed for the correctness, completeness and up-to-dateness of the information provided

Condition: ready for operation (used), Selfcentering 3-jaw-chuck 800mm Kedpfx Asv H T E Isdwoll

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Z-axis: 400 mm, incl. Image Controller for SK40 Kjdpfxewhdx Ts Adwsll

Condition: good (used), Year of construction: 1999, functionality: fully functional, CNC lathe tornado A90 after renovation in 2024 tool head VDI30 equipment bar feeder collet chuck on E173 The machine is working can be seen in production Klsdpswavqxjfx Adwol

Condition: good (used), Year of construction: 1999, Machine is in good condition. X 750 mm Kedpfx Aewx Rafodwell Y 400 mm Z 500 mm 10.000 rpm