Measuring mchines

ZOLLER Venturion 810C3

Condition: excellent (used), Year of construction: 2014, operating hours: 66,600 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer you the following: Technical Data: Control: Heidenhain iTNC 530 HSCI Travel distances: - X-axis: 600 mm - Y-axis: 500 mm - Z-axis: 500 mm Main spindle: - Speed range: 20 - 18,000 rpm NC Rotary Table: - Clamping surface: 600 x 500 mm - Load capacity: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool pockets: 210 positions Equipment and Accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC rotary/swivel table incl. table cooling - BLUM NT laser tool measurement - Calibration arbor with tool holder - Infrared probe, Heidenhain TS 649 - Preparation for 3D quickSET - Hinged belt chip conveyor - ICS, 40 bar, 600 l tank, incl. rotating viewing window, sealing air, linear measurement systems, bed flushing - Rinsing pistol - Mechanical oil and emulsion mist separator - Air blast through spindle center - Mode of operation 4 - Machine preparation for handling systems, consisting of: - Automatic, lateral loading door - Electrical interface for articulated arm robot - Pneumatic control and monitoring of the zero-point clamping system - Activation/deactivation of handling system via switch on machine operator panel - Additional rinsing in the machining area included - Preparation for job management included - Operator panel arrangement on the left included - Power supply to machine table incl. 2-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 - 240 bar, pressure adjustment via proportional valve technology - Extension of rotary union to 4 channels included On-time hours: approx. 66,600 h Nwjdexgnz Tjpfx Aa Deb Spindle hours: approx. 44,800 h The robot shown in the pictures is not included in the scope of delivery. The machine is expected to be available from October/November 2025. The ball screw drives and linear guides in the X and Z axes have been replaced. Accessories, depicted tools, and clamping equipment are only included if specifically mentioned in the additional information. Subject to changes and errors in the technical specifications and information. Prior sale reserved!

Condition: ready for operation (used), Year of construction: 2008, Walter MINI POWER Nwodpfx Aoxnkzfea Djb Loader Fanuc

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm Nwedehzbipopfx Aa Deb - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: excellent (used), Year of construction: 2003, Double end tenoner Celaschi 4+4 motors Opening side up to 3000 mm Nwjdpfx Aaovx Afnj Djb

Condition: like new (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, Drying paternoster for finger-jointed boards Consisting of: - Transfer chain to finger-jointing press (foldable) - Drying paternoster (approx. 7 m, board length up to 6 m) - Cutting and zero-cutting saw - Conveyor belt for waste wood disposal - Stacking machine - Strip magazine not for sale - Package cross conveyor The machine is in very good condition and has had very little use. Nwjdpfjwclkyjx Aa Dsb The machine is still assembled but available immediately.

Condition: new, Year of construction: 2024, functionality: fully functional, travel distance X-axis: 720 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: TNC 640, rotational speed (max.): 15,000 rpm, General Spindle :Direct drive Speed :15,000 rpm Power :34 kW Torque :180 Nm Tool holder :SK 40 Tool changer :90 stations Working range Travel X: 720 mm Travel Y :600 mm Travel Z :500 mm Rotary/swivel table :D= 700 mm Table load :350 kg C-axis resolution :0.001 degree Other features Rapid traverse X/Y/Z: 36 m/min Max. speed B-axis: 25 rpm Max. speed C-axis: 25 rpm Equipment Chip management : Chip conveyor Nodpfx Aetpm Niea Dswb Coolant supply : IKZ 40 bar Workpiece measurement : Renishaw OMP 40 Tool measurement : BLUM laser bridge Software : Kinematic Optimizer

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Z-axis: 500 mm, For sale is a Garant tool presetting device, model VG1. The measuring system is in very good condition and ready for immediate use. Technical data: Year of manufacture: 2010 Measuring range X-axis: 400 mm Measuring range Z-axis: 500 mm Measuring accuracy: 1 µm Tool holder: SK50 Nwsdpfx Aajxf T R Rj Dob Transport and loading can be organized across Europe upon request and for an additional charge. Prices are subject to VAT. Inspection is possible by appointment. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell your machine? For more information or contact options, please visit our website.

Condition: refurbished (used), DIFFERENT TYPE OF MOTOR AND SLIDE for CELASCHI DET Nwodpfx Aaedvlcyo Djb SECOND-HAND, FULLY RECONDITIONED

Condition: ready for operation (used), Year of construction: 2018, 5-AXIS Machining Centre Brand: DMG MORI Model: DMF DMU 50 3rd Year: 2018 (spindle hours: 4,900) Control: Siemens 840D CELOS Equipped with: Integrated rotary table dia. 600 x 500mm / 300kg Spindle 21 kW – 15,000 rpm Tool changer with 60 positions Probe TS 649 3D quickset Through-spindle coolant 40 bar Tool probe Coolant gun Chip conveyor Specifications: Table surface: 600 x 500 mm X-axis travel: 650 mm Y-axis travel: 520 mm Z-axis travel: 475 mm B-axis: -35/+110° C-axis: 360.000° Spindle speed: 20 - 15,000 rpm Nwsdpfeyb Drfjx Aa Djb Spindle power: 21 kW Spindle taper: SK 40 Rapid traverse XYZ: 42 m/min Machine dimensions with conveyor: 3440 x 2850 x H 2750 mm Approximate weight: 7,480 kg

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, warranty duration: 12 months, Equipment: cabin, Paint/spray booth Njdjia Taxjpfx Aa Dowb dimensions without fan and control Panel! Extraction surface - dimensions (mm): 4430(w)x1900(h) Overall dimension(mm): 4530(w)x2350(h)x1910(d) Technical data: - Fan power 4.4kW (ATEX) - Fan suction capacity: 24000 m³/h (max 1200Pa) - Lighting: 2 pcs 2x58W (ATEX) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us