Used beverage production for sale (1,112)

Condition: used, Year of construction: 2019, Semi- automatic labelling machine model S1/M – CONSOLE 230V, 50 Hz, Single phase Lodpfoz A Dgnsx Ab Uert Max approx 700 bph Console for labelling adjustment Paper web passage height H=150mm

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: A40 1438, DIMAC Packaging Star F30 USED DIMAC Star F30 packer & thermo tunnel used for bottle packaging (3x2, 3x3, 4x3) 2003 Year - Currently machine is stored in WH. Also for SALE LINKER CSW-30 & BTG-1M €19,000 PACKER SHRINK WRAPPER LINKER EUROPA SP z o.o. SERIAL SW-001/03/2007 YEAR 03/2007 CAPACITY 30 cases / minute Lrjdpfx Abetyu N Ej Ujt +Thermo tunnel for transparent & printed shrink foil THERMOTUNNEL MANUFACTURER TERMO-PAK MODEL BTG - 1M SERIAL 3755 YEAR 11/2016 CAPACITY up to 7200 bph

Condition: used, Year of construction: 2017, Overview This Jakü EGA-CARBO is a water deaeration and carbonation unit built in 2017. It removes dissolved oxygen from the water under vacuum and then carbonates it with CO2, with a capacity range of 120 to 12,000 l/h. The unit was used exclusively for table water production and for deaerated water in filtration, and has run approx. 1,500 operating hours. The unit is mounted on a stainless steel base frame with two vertical stainless steel vessels, pumps and a stainless steel control panel with push buttons, indicator lamps and digital displays. It processes two components, water and CO2. CO2 dosing is set manually; there is no Brix measurement. Technical data - Manufacturer: Jakü - Model: EGA-CARBO - Year of manufacture: 2017 - Machine type: deaeration and carbonation unit for water - Capacity: 120 - 12,000 l/h - Components: water, CO2 - Electrical supply: 400 V, 50 Hz - Installed power: 16 kW - Rated current: 50 A - Operating hours: approx. 1,500 h Lrjdpez A Dbrefx Ab Uot Equipment - Vacuum deaeration of the water - CO2 carbonation with manual CO2 dosing - Two vertical stainless steel vessels - Pumps on a stainless steel base frame with adjustable feet - Stainless steel control panel with push buttons, indicator lamps and digital displays Condition Used, approx. 1,500 operating hours. The unit is already out of service and ready for collection. Availability Available immediately. Location: Germany.

Condition: used, Year of construction: 2011, Overview Complete turnkey craft brewery built around a 4-vessel Newlands Systems (NSI) brewhouse with a 35 hl brew length, delivered from Canada and installed in 2011-2013. The plant covers the full process chain: malt intake and milling, brewhouse, fermentation and maturation, yeast handling, CIP, steam and glycol cooling. Fermentation capacity is 9 x 70 hl cylindroconical fermenters plus 2 x 70 hl pressure-rated bright beer tanks. The brewhouse runs on a Siemens Braumat control system. The brewery is still installed and under power and can be visited in operation. Technical data - Manufacturer: Newlands Systems (NSI), Canada - Year of manufacture: 2011-2016 - Machine type: complete turnkey brewery, 4-vessel brewhouse - Brew length: 35 hl - Brewhouse vessels: mash mixer 44 hl, lauter tun 69.85 hl, boil kettle 58 hl, whirlpool - Fermentation and maturation: 9 x 70 hl fermenters, 2 x 70 hl bright beer tanks - Steam: 750 kW electric steam boiler, operating pressure approx. 4 bar - Control system: Siemens Braumat - Power supply: 3 x 400 V / 50 Hz Scope of Delivery - Brewhouse | Newlands Systems | 4-vessel, 35 hl brew length | Mash mixer, lauter tun with rakes, boil kettle with internal calandria, whirlpool, wort heat exchanger, progressive cavity grain-out and spent grains pumps, post-whirlpool solids filter | 2011 - Control system | Siemens | Braumat | Brewhouse control panel and operator station | 2011 - Hot liquor tanks | Newlands Systems | 2 x 60 hl, stacked | External steam heat exchanger, pumps and valving, 316 stainless wetted surfaces, water treatment dosing bin | 2012 - Fermenters | Newlands Systems | 9 x 70 hl working volume | Cylindroconical, 60 degree cones, standpipes, cooling jackets | 2012-2013 - Bright beer tanks | Newlands Systems | 2 x 70 hl working volume | Pressure rated, carbonation stone assemblies | 2012-2013 - Yeast storage tank | Newlands Systems | 700 l | Conical, cooling jacket, mixer | 2013 - Yeast propagator | Newlands Systems | 240 l working volume | 300 l total volume, AISI 304 stainless steel | 2012 - CIP station | Newlands Systems | Steam heating and pump | 2012 - Malt silo | MAFA Sweden | UNB 70 | 30 t capacity, outdoor installation | 2012 - Auger system | MAFA Sweden | Silo and mill connections, flexible auger, specialty grains dump hopper | 2012 - Malt mill | Bühler | 4-roller | 3.0 kW drive, ATEX marked | 2012 - Grist hopper | Newlands Systems | 1,000 kg | On load cells | 2012 - Electric steam boiler | Pannpartner | 750 kW | 3 x 400 V / 50 Hz, design pressure 16 bar, empty weight 800 kg, CE marked | 2011 Lodpjzza Diefx Ab Uert - Glycol chiller | Daikin | Air-cooled water chiller, refrigerant R407C, 400 V | 2011 - Sterile air unit | Donaldson | 2016 - Pumps, fittings and accessories | 2012-2013 Condition Used - still installed and under power, available for inspection in production. Availability Immediately. Location: Norway. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: ready for operation (used), TETRA ALCIP 10 CIP WASHING UNIT YOM 2004 LOCATION - POLAND Lredpfoz Dpumox Ab Ust EXCELLENT CONDITION

Condition: used, Year of construction: 2012, Overview Complete Krones PET line from 2012 for carbonated water in non-returnable PET bottles of 0.5 L, 1.0 L and 1.5 L, rated at 16,000 bottles/h on the 1.5 L format. The line runs from preform feeding through a blow moulder-filler-capper bloc in a clean room, beverage treatment and CIP, inspection, drying, coding and wrap-around labelling, to shrink-film packing with handle application, palletizing and stretch wrapping. A separate sleeve section with sleeve labeller, steam shrink tunnel, inspection and two dryers is included. Technical data - Year of manufacture: 2012 - Output: 16,000 bottles/h (1.5 L) - Product: carbonated water - Bottles: PET, 0.5 L, 1.0 L and 1.5 L - Labeller: up to 20,000 bottles/h - Packer, palletizer and stretch wrapper: up to 24,000 bottles/h - Packs: shrink-film packs with carry handle, 3x2 and 4x3 - Pallets: 800 x 1200 mm and 1000 x 1200 mm - Electrical: 380/220 V, 3/N/PE, 50 Hz Scope of Delivery - Preform feed unit | Krones | CONTIFEED | with tilting device for the preform hopper | 2012 - Preform interior cleaning | Krones | PREJET | 2012 - Stretch blow moulder | Krones | CONTIFORM S8 | 16,000 bottles/h (1.5 L) | 2012 - Filler-capper | Krones | MODULFILL VFS | 60 filling valves, 16,000 bottles/h (1.5 L) | 2012 - Clean room | Krones | for the blow moulder-filler-capper bloc | 2012 - Closure conveyor | Krones | 2012 - Beverage treatment | Krones | CARBOFLOW | 2012 - CIP system | Krones | VARIOCLEAN | 30 m³/h | 2012 - Container conveyors | Krones | SYNCO | 2012 Lodpfx Abez Dw Uus Usrt - Inspection machine | Krones | CHECKMAT 707 | 2012 - Container dryer | Krones | LINADRY | 2012 - Container coding | Videojet | inkjet coder | 2012 - Labelling machine | Krones | CONTIROLL COMBI | wrap-around OPP labels, up to 20,000 bottles/h | 2012 - Inspection machine | Krones | CHECKMAT 731 | 2012 - Sleeve labeller | Krones | SLEEVEMATIC | 2017 - Steam shrink tunnel | Krones | SHRINKMAT - Inspection machine for the sleeve section | Krones | CHECKMAT - 2 container dryers for the sleeve section | Krones | LINADRY | 2017 - Pack conveyors | Krones | MULTICO | 2012 - Shrink-film packer | Krones | VARIOPAC PRO FS | 3x2 and 4x3 packs, up to 24,000 bottles/h | 2012 - Handle applicator | Krones | VARIOSTICK | 2012 - Palletizer | Krones | MODULPAL | 800 x 1200 and 1000 x 1200 mm pallets, up to 24,000 bottles/h | 2012 - Pallet conveyors | Krones | PALCO | 2012 - Stretch wrapper | Robopac | 2012 - Electrical power distribution for the line | Krones | 2012 Condition Dismantled and stored. Inspection on site by appointment. Availability Available immediately. Location: Georgia.

Condition: used, Year of construction: 2018, Overview This Krones Linatronic M is an empty bottle inspector for glass bottles, built in 2018. It inspects every empty container before filling and rejects any container that fails one of the inspection stages. The machine combines camera-based base, sealing surface, screw thread and sidewall inspection with high-frequency and infrared residual liquid and caustic detection. Two sidewall modules with four mirror assemblies and four cameras provide a compact full-front view of the container, and the DualFlash neck finish lighting inspects the outer and inner sealing surface separately using two minimally offset lighting angles. Foreign containers are identified at the machine infeed by height, contour and colour detection. Three Ecopush rejection points separate foreign, dirty and damaged containers. The machine is operated from a Krones iPanel CD terminal. Technical data - Manufacturer: Krones - Model: Linatronic M - Machine type: empty bottle inspector - Year of manufacture: 2018 - Application: inspection of empty bottles prior to filling; neck ring detection for returnable PET containers included - Inspection modules: base inspection, sealing surface inspection, screw thread inspection (cone optics), sidewall inspection - Sidewall inspection: 2 modules with 4 mirror assemblies and 4 cameras, two views per camera at 45° - Residual liquid and caustic detection: high frequency and infrared - Additional detection: polarising transparent films at container base and sidewall, glass fragments at the container base, scuffing via sidewall camera - Foreign bottle detection at the infeed: container height, contour and colour via camera - Rejection: 3 x Ecopush - foreign containers at the infeed, dirty containers and damaged containers at the discharge - Control: Krones iPanel CD operator terminal, prepared for data connection to a single-station PC (Datalyser) - Test bottle programme with 2D code - Conveyor height: 1,200 mm, adjustment range 1,155 - 1,315 mm - Minimum required room height: 2,810 mm - Overall dimensions: approx. 6,700 x 1,300 x H 2,800 mm - Direction of operation: right-left machine - Power supply: 400 / 230 V, 3/N/PE, 50 Hz, 6 A full load current, 20 A pre-fuse; auxiliary supply 230 V, 1/N/PE, 5 A - Standards: IEC 61439-1 / IEC 60204-1, CE marked Lrodpfozy Ud Iex Ab Uot - Machine base and housing: stainless steel (AISI 304 equivalent), clean design Equipment - DualFlash neck finish lighting, separate inspection of outer and inner sealing surface - Combined thread inspection via the sidewall mirror assembly - Fallen container detection in front of the machine (photoelectric sensors with infeed pusher) - Base blow-off unit with clocked air nozzle for foam and lubricant residues - Container blower at the infeed, conveyor dead plate (3-fold) - Servo-driven collection module for rejected containers at the discharge - Festo pneumatic system with maintenance unit, food-grade lubricants - Emergency mode: passage operation without inspection - OEM machine data sheet and dimension drawing Condition Used, technically complete. The machine is still installed and under power at its production site; the photographs show it in the installed state. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: used, Reusable glass bottle filling line for filling fruit juice and juice mix drinks. The filling line consists of the following components: - New glass bottle lifter (Kettner, 1985) with pallet loading, gripper head, empty pallet removal, bottle table and intermediate layer remover - Empty palletiser (Kettner 1994) with pallet loading, gripper head, crate table and empty pallet removal - Unpacker (Kettner, 2002) with packing heads and gripper tulips - Crate washer (Bohrer), crate cleaning trough with two crate turners - Unscrewing machine (Adelski, approx. 1990) with 12 unscrewing heads - Bottle cleaning machine (Krones, 1994) single-end machine - Empty bottle inspector (Heuft) for checking the base, mouth, side walls, thread and residual liquid - Filler (Bertolaso, approx. 1990) for hot filling with 60 filling valves and capper for twist-off caps. - Tunnel cooler (Niko, 2015) for spray cooling of the filled beverage - Labelling machine (Krones) for cold glue labelling of belly, back and neck labels - Label inspection (Metec) - Inkjet printer (Markem-Imaje, 2012) for best-before date marking - Packer (Kettner, 1989) with packing heads and gripping tulips - Palletiser (Kettner) with empty pallet feeding, gripping head and raised working platform with control panel - Pallet securing device (Bornbinder) for strapping the pallets with a horizontally applied cord - Film wrapper (Robopac) for wrapping the pallets with stretch film Lrsdpfx Abez D Hmme Uet Additional title: Returnable bottle filling line with palletising, year of manufacture 1985 - 2015 Capacity: 15000 bo/h referring to 0.5 l bottles Formats: 0.2 l; 0.25 l; 0.5 l; 0.75 l, 1.0 l bottles / 6-packs, 12-packs, 20-packs and 30-packs / twist-off caps / Euro and brewery pallets Operation / Control: S7-300 (pallet wrapper), otherwise S5 or Schleicher control system Features: New glass lifter, depalletiser, unpacker, crate washer, unscrewer, bottle cleaning machine, empty bottle inspector, Glass bottle filler and capper, tunnel cooler, labelling machine, label inspector, date coder, packer, palletiser, pallet strapper, pallet wrapper

Condition: like new (used), Year of construction: 2019, CAP 30 APPLICATOR 1000 FOR HELICAP 23 PRO: YOM 2019 VERSION 400v 9.000 RUNNING HOURS NEW CONDITION THE MACHINE IS IN PRODUCTION TILL MAY 15TH. Lsdoyynd Ropfx Ab Uert

Condition: used, Year of construction: 2008, Overview This Haloila Octopus 1800 SFTS TWIN is an automatic rotary-ring stretch wrapper for palletised loads, built in 2008. It was built by Oy M. Haloila Ab and delivered under the ITW Mima Packaging Systems brand; the Octopus line is sold today under the Signode name. The machine is still installed, under power and running in production, and can be inspected in operation. The rotating ring carries the film carriages around the stationary pallet, so the load itself is never turned. In the TWIN configuration two film carriages run on the ring, which is what carries the output: up to 100 pallets per hour with standard overlap and 21 wraps. Euro pallets and half pallets are processed. A top sheet unit is installed, functional and in daily use. The machine has no automatic reel change (RCS). Lrsdpfx Aez D Aw Ujb Ujt Technical data - Manufacturer: Haloila - Model: Octopus 1800 SFTS TWIN - Year of manufacture: 2008 - Machine type: automatic rotary-ring pallet stretch wrapper (pallet winder) - Operating hours: 50,408 h - Output: up to 100 pallets/h at standard overlap and 21 wraps - Pallet formats: Euro pallets and half pallets - Configuration: TWIN, two film carriages on the rotating ring - Automatic reel change (RCS): no - Top sheet unit: yes, functional and in use - Control: Siemens SIMATIC S7-300 PLC - Operator panel: Siemens SIMATIC touch panel - Communication: SIMATIC NET / PROFIBUS - Drives: Emerson / Control Techniques frequency inverters (Commander SK, Unidrive M300) - Power supply: 3 x 400 V - Max. current: 20 A - Connected load: 5.0 kW - Machine weight: approx. 2,650 kg - CE mark on the machine plate Equipment - Rotating ring with two film carriages (TWIN), film clamping and cutting on the ring - Top sheet unit for covering the pallet load before wrapping - Siemens SIMATIC S7-300 control with touch panel operation in a separate switch cabinet - Emerson / Control Techniques inverter drives - Operating manual, wiring diagrams and further technical documentation The pallet conveyor is not included in the sale. Condition Used and fully functional. The machine is in production at the time of listing and has 50,408 operating hours. Maintenance was carried out regularly by the machine manufacturer. Sold without warranty. Availability From 16 October 2026. Location: Germany.

Condition: used, machine/vehicle number: SH01-332, motor defect. 5000 EUR afte repair Lredpfjz A Dh Eox Ab Uot

Condition: used, Year of construction: 1990, Overview This is a complete automatic KEG line for stainless-steel kegs, built in 1990 by Leifeld & Lemke and continuously extended and modernised over its service life. It covers the full cycle from empty-keg infeed and centring through external washing, internal cleaning, filling and full-keg checking to automatic palletising. According to the seller it runs at up to 130 kegs/h in the 30 L format in three-shift duty. Control is by Siemens SIMATIC PLCs of mixed generation (see Condition). Technical data - Manufacturer (line builder): Leifeld & Lemke - Year of manufacture: 1990 (continuously upgraded since) - Machine type: complete automatic KEG cleaning and filling line - Capacity: up to 130 kegs/h at 30 L (seller-stated) - Keg formats: 20 L, 30 L, 50 L, basket fitting (Korbfitting); no slim kegs - Control: Siemens SIMATIC S5 and S7-300 (mixed generations) Scope of Delivery - Empty-keg infeed with centring column | Leifeld & Lemke | Detects intermediate layers, centres kegs for the robot | 1990 - Keg handling robot | KUKA | Loads empty kegs onto the conveyor, unloads full kegs onto pallets | approx. 2015 - Fitting tightener | Leifeld & Lemke | Re-torques loose keg fittings | 1990 - Keg inverter | Leifeld & Lemke | Inverts kegs for internal rinsing | 1990 - External keg washer | Leifeld & Lemke | Steam-heated, 2 zones (brushing and high pressure) | 1990 - Internal cleaning | Leifeld & Lemke | Caustic pre-clean (approx. 10 min dwell, for wheat beer) and main cleaner | 1990 - CIP plant | Leifeld & Lemke | 5 tanks with chemical dosing, steam-heated (seller-stated) | 1990 - Keg filling block | KHS Till | 1990 - Full-keg check-weigher | Leifeld & Lemke | With keg blow-off | 1990 - Cap placer | Leifeld & Lemke | Seats plastic caps onto the fitting | 1990 - Palletiser | Albert Frey | Served by the KUKA robot | 1990 - Electrical documentation | Circuit diagrams available as physical copies Not included: handle control, Vision Tec inspection system, labeller. No operating manual is available. Condition Used - still installed and under power, in active three-shift production and reported by the seller to be well maintained. The 1990 line has been progressively modernised: kegs were originally hand-loaded, the robot was later replaced (approx. 2015, seller-stated) and Siemens SIMATIC touch HMIs added. Control mixes Siemens SIMATIC S5 (reportedly filler, CIP and pre-/main cleaning) and S7-300 (the remaining stations, conveyors and washer); as the S5 generation is long discontinued, spare-part supply and future control integration should be planned accordingly. Ledpfjz D S Sbex Ab Uert Availability In production until approximately April 2027; the existing and the successor line will then run in parallel, so realistic handover is from around Q2 2027. Location: Germany. Viewings in operation are possible at any time. Dismantling and removal can be arranged on request. Price on request.

Condition: used, Year of construction: 2018, machine/vehicle number: LC667, Used GEA Aseptic line 48000 BPH - year 2020 (data of use)Technical Specifications & Performance DataThis used bottling line is a 2020 PET aseptic production line configured for 230 ml PET bottled water at a rated output of 48,000 bph. It combines PET bottle blowing, aseptic processing, filling, capping, labeling, inspection and secondary packaging for high-output beverage production.* Production capacity: 48,000 bph* Available bottle format: 230 ml PET only* Main line year: 2018, 2020 (data of use)* Blowing equipment: SIPA SFR24 EVO, 48,000 bph* Filling equipment: GEA FILLSTAR FX AS 84 PET filler, 48,000 bph* Compressor: AF L5S, 35 bar, 220 kWAdvanced Automation & Control SystemsThe line includes electrical control cabinets with HMI displays, ventilated electrical enclosures and high-voltage warning protection. Process equipment includes a Tetra Pak FLEX1 PET UHT sterilizer rated at 17 t/h, a Tetra Pak 15,000 L/h homogenizer rated at 90 kW, a 15,000 L/h yogurt secondary pasteurizer, pulsed-light sterilizers, laser marking machines and visual inspection systems.Product preparation assets include four 25 m³/h centrifugal pumps rated at 7.5 kW, two 30 m³/h centrifugal pumps rated at 18.5 kW, one 12,000 L/h rotary pump rated at 7.5 kW and one 20,000 L/h rotary pump rated at 18.5 kW. The installation also includes a triple 100 mm high-pressure filter, model ECS7003SCA5H19-A61.Production Line Integration CapabilitiesThe PET production line integrates bottle blowing, drying, aseptic filling and capping, cap handling, labeling, coding, inspection, carton packing, sealing and conveying. A GEA conveyor chain system provides bottle transport at 20 to 60 m/min. Five bottle dryer sets with conveyors are included, together with two GEA dryers rated at 700/840 m³/h.Machine type | Manufacturer / model | YearMachine typeManufacturer / modelYearBlow Molding MachineSIPA SFR24 EVO2020 (data of use)Filling MachineGEA FILLSTAR FX AS 84 PET2020 (data of use)Labeling MachineGuangzhou Lixin AP-400H2020 (data of use)Labeling MachineGuangzhou Santuo SL-695 Lrodpfozwu Uuox Ab Uet

Condition: used, Machine: Reihenfüller Primus Lrjdoz A Dicjpfx Ab Uet

Condition: used, Year of construction: 2020, operating hours: 2,000 h, machine/vehicle number: LC665, Used line Tetra Pak A3 compact flex 250ml Prisma edge 9600 BPHTechnical Specifications & Performance DataThis Tetra Pak A3/Compact Flex aseptic carton filling and capping line is configured for Prisma Edge packaging in the 250 ml format. It combines carton filling, cap application and Helix handling equipment for compact beverage production and industrial packaging operations. The available equipment is designed around the Tetra Pak filling platform and Cap30 DreamCap closure system.Manufacturer: Tetra PakFiller model: A3/Compact FlexMaximum production capacity: 9600 BPHPack format: 250 ml Prisma EdgeAvailable configuration: filler, Cap30 capper and Helix equipmentOperating hours: 2000Machine year: 2020Advanced Automation & Control SystemsThe equipment includes line control for coordinated operation of the available filling, closure application and handling sections. A controlled line architecture supports consistent product flow through the filling and capping process while allowing the individual modules to operate as an integrated packaging system. The listed configuration includes Filler, LC40, ACHX30 and Cap30 components.Production Line Integration CapabilitiesThis equipment is suitable for integration into an aseptic carton packaging line. The available filler, capper and Helix sections can be positioned with compatible upstream product preparation equipment and downstream carton conveying, accumulation, coding and secondary packaging machinery. Its Prisma Edge format configuration makes it relevant for beverage production applications requiring 250 ml carton packs.Machine typeManufacturer / modelYearFilling MachineTetra Pak A3/Compact Flex2020Capping MachineTetra Pak Cap30 DreamCap2020Various EquipmentTetra Pak Helix2020Machine Condition & Maintenance HistoryThe line is reported as running, with 2000 operating hours. The stated availability is limited to the filler, capper and Helix equipment. This condition provides a practical basis for buyers planning a second hand aseptic packaging installation, line extension or replacement project within an existing industrial packaging environment.Operational Performance & VersatilityThe A3/Compact Flex platform is intended for high-output carton filling and closure application. The Cap30 DreamCap system is matched with the listed carton format, supporting a consistent filling-and-capping sequence for Prisma Edge packs. With a maximum stated output of 9600 BPH, the equipment can supp... Lrodpfxezucgme Ab Uot

Condition: used, Year of construction: 1990, machine/vehicle number: 348.36.028, 36 filling valves; working direction: left-right. Machine dimensions: L 3.200 x W 2.500 x H 2.700. Weight: 5.000 kg. filling valves: 36 working direction: left-right Lsdpfx Aez A Dfwsb Uert weight [kg.]: 5000

Condition: used, Year of construction: 2022, machine/vehicle number: LC653, Used Micro can CL10 filling line 4000 Cans per hourTechnical Specifications & Performance DataThis complete automatic canning line is a compact, engineered for efficient beverage production in aluminum cans. Manufactured by Micro Can, it integrates key bottling equipment into a cohesive, space-efficient unit suitable for industrial packaging environments. As a second hand, used bottling line, it offers proven reliability and excellent value for expanding or optimizing production.Line type: Complete automatic canning lineManufacturer: Micro CanMain module: Micro Can CL10 filler/seamerRated output: 4,000 cans per hourContainers: Aluminum cansFormats: Standard 0.33ml and 0.44mlFilling type: gravityAdvanced Automation & Control SystemsThe line is designed for streamlined operation with integrated control and coordinated infeed/outfeed logic between the depalletizer, filler/seamer, and labeling machine. Quick setup and simple recipe changes support efficient format adjustments. Operator-friendly controls, interlocked guards, and emergency stops provide safe, intuitive handling during routine operation and maintenance. The configuration minimizes interface risks and ensures stable synchronization across the complete packaging process.Production Line Integration CapabilitiesOptimized for inline operation, this second hand canning line connects upstream depalletizing to downstream labeling with harmonized conveyor handling. It is suitable for beverage production expansions, pilot facilities, or as a dedicated canning cell within a larger packaging plant. Designed for aluminum cans, it can be interfaced with upstream processing and downstream secondary packaging equipment as needed.Machine TypeManufacturer/ModelYearDepalletizerFilling MonoblockMicro Can CL10Labeling MachineWrap-around labellerMachine Condition & Maintenance HistoryThe line is offered as a complete, ready-to-operate unit. As a used bottling line, it has been configured for immediate deployment in industrial packaging environments, subject to standard site preparation and utilities. Overall condition is consistent with a professionally integrated second hand canning line built for dependable daily operation.Operational Performance & VersatilityWith a rated output of 4,000 cans per hour, the Micro Can CL10 filler/seamer delivers stable filling and precise seaming performance. The wrap-around labeling machine supports continuous production with consistent label application, and the depal... Ledpfxozkhtqo Ab Usrt

Condition: used, Year of construction: 2018, operating hours: 3,500 h, machine/vehicle number: LC636, Used filling KHS Innofill can line 16000 CPH - year 2018Technical Specifications & Performance DataThis complete used bottling line is a second hand beverage canning system engineered around a KHS can filler block, integrated with high-quality upstream and downstream packaging machinery. Designed for industrial packaging and beverage production, it delivers reliable performance for aluminum cans.Production speed: up to 16000 cph (cans per hour)Primary filler: KHS Innofill Can C (2018)Can seamer: Ferrum FC03 (2018)Depalletizer: SKA Fabricating Can-I-BusInspector: Heuft fill level detectorRinser: AV-C500 can air rinserDryer: Air Control Industries can dryerLabeller: Pack Leader (Advanced Dynamics system)Case packer: Atlanta Rafaello 726Case coding: SATO S86-EX printerConveyors: KHS and AE Conveyors, plus KBR outfeed belt conveyor with PCUtilities/auxiliaries: Conveyor lubricator (Loewados)Container type: Aluminum cansDocumentation: Hard‑copy manuals includedAdvanced Automation & Control SystemsThe line is equipped with dedicated control cabinets for conveyors and labeling, supporting coordinated start/stop logic and smooth product handling. The KHS Innofill Can C filler block provides modern automation architecture with line-friendly integration, recipe handling, and synchronized drives for consistent filling and seaming operations. Safety interlocks and guarding are present across key stations for operator protection and process reliability.Production Line Integration CapabilitiesThis packaging line offers end-to-end integration from depalletizing to case packing, enabling seamless flow of cans through rinsing, filling, seaming, inspection, drying, labeling, and secondary packaging. Modular conveyors by KHS, AE Conveyors, and KBR facilitate balanced accumulation and stable transfer, helping maintain throughput at rated speeds. The configuration is suitable for a wide range of beverage production scenarios and can be adapted to different aluminum can sizes with appropriate change parts and guides.Machine Condition & Maintenance HistoryAs a second hand used bottling line, the core process equipment includes 2018-generation KHS Innofill Can C filler and Ferrum FC03 seamer. The asset list indicates a complete, coherent set of stations with hard‑copy manuals available, supporting efficient commissioning, maintenance, and spare parts management. The line is presented in working condition and ready for operation, subject to standard site preparation and utilities.Operational Performance & VersatilityDesigned for high-efficiency can handling, the line features a SKA Fabricating depalletizer for automated infeed, an air rinser for internal container preparation, precise isometric filling via KHS Innofill Can C, and robust double seaming with the Ferrum FC03. Quality assurance is enhanced by a Heuft fill level detector. Downstream, an Air Control Industries dryer pre... Lrjdpfxsy Szbye Ab Ust

Condition: like new (used), Year of construction: 2009, in very good condition. Ledezz Siqspfx Ab Ujrt

Condition: used, filtration surface (sqm): 12 Lrsdsz A Divopfx Ab Ust discharge of vessel: automatic discharge operating pressure (bar): 9 electrical power supply kW: 5 weight [kg.]: 1500 volume of vessel (ltr): 880

Condition: ready for operation (used), CAP30 APPLICATOR 1000 HELICAP23 PRO: YOM 2013 VERSION 300v 15.000 RUNNING HOURS PRICE 140.000 EUR FCA POLAND Lredew Nqn Nspfx Ab Uot EXCELLENT CONDITION, READY FOR SHIPPING

Condition: used, Year of construction: 2014, operating hours: 4,908 h, machine/vehicle number: LC658, Used Tetra Pak A3 Speed V40 250ml Prisma filling lineTechnical Specifications & Performance DataThis used bottling line is a complete Tetra Pak aseptic carton solution centered on the A3 Speed filler. Engineered for industrial packaging and beverage production, it delivers high output with precise handling of Prisma cartons. All core modules share the same manufacturing year, providing a cohesive and modern second hand system suitable for efficient aseptic operations.Production speed: up to 24,000 packages/hourPrimary format: 0.25L Prisma cartonContainer type: Carton (aseptic brik)Filler: Tetra Pak A3 Speed, version 040V, year 2014, working hours 4,908Accumulator: Tetra Pak ACHX 30, version 070V, year 2014, working hours 5,528Straw applicator: Tetra Pak SA30, version 040V, year 2014, working hours 5,821Case packer: Tetra Pak CBP30 Speed, version 030V, year 2014, working hours 38Filling process: Aseptic carton fillingManufacturer: Tetra PakAdvanced Automation & Control SystemsThe line combines Tetra Pak engineering across all modules for synchronized operation and high uptime. Centralized operator interfaces and coordinated control logic simplify start-up, ramp-up, and stop sequences, while ensuring consistent product and package quality across the filling, straw application, accumulation, and case packing stages. Format handling for 0.25L Prisma cartons is streamlined with fast, repeatable adjustments and clear operator guidance.Integrated line control for coordinated speeds and bufferingOperator-friendly HMI on core equipmentAutomated interlocks across modules for safe operationRecipe-based format management for 0.25L Prisma cartonsProduction Line Integration CapabilitiesDesigned as an inline solution, this used bottling line accommodates continuous flow from aseptic carton filling to secondary packaging. The accumulator provides essential buffering to keep the filler running during short downstream stops. The straw applicator and case packer complete a compact, high-throughput configuration for beverage production.Machine typeManufacturer / ModelYearFilling MachineTetra Pak A3 Speed (040V)2014Various EquipmentStraw Applicator Tetra Pak SA30 (040V)2014Various EquipmentAccumulation System Tetra Pak ACHX 30 (070V)2014Case PackerTetra Pak CBP30 Speed (030V)... Lrsdpfx Abozmpzbe Uot

Condition: used, Machine: SARTORIUS 345034-E Modulfilter 3 x 4 x 16" Jumbo Lredpfx Asz A Dkmeb Ujt

Condition: used, Year of construction: 1992, Stainless Steel Tank Lredpfxoz A Dc Ne Ab Ujt

Condition: used, Year of construction: 1992, machine/vehicle number: 408.105, Speed: ca 15.000 bph Ljdpfx Absz A Dgzj Ujrt for winecork turning left-right