Used Electromagnetic flow meter for sale (25)

Lowest price: Price

Highest price: Price

Latest advertisements: Release date

Oldest advertisements: Release date

Shortest distance: Distance

Farthest distance: Distance

Latest year of manufacture: Year of construction

Oldest year of manufacture: Year of construction

Latest update: Update

Oldest update: Update

Manufacturer A to Z: Manufacturer

Manufacturer Z to A: Manufacturer

Relevance: Relevance

flow

Listing

Lingen (Ems)

6,982 km

Flow Cytometer

ACCURI C6 Flow Cytometer ACCURI C6

€11,990

ONO plus VAT

Call

Condition: good (used), Year of construction: 2011, The BD Accuri® C6 is a digital basic flow cytometer, which is equipped with a Blue (488nm) and a Red (640nm) lasers, two light scatter detectors (FSC and SSC), and four fluorescence detectors. The default configuration of the BD Accuri® C6 is similar to the FACSCalibur-2 (3-Blue 1-Red) with filters optimized for the detection of fluorochromes such as FITC, PE, PerCP, and APC. The Selectable Lasers Module allows operation of the system in two additional configurations (2-Blue 2-Red, and 4-Blue) and significantly expands the fluorochrome combinations that can be analyzed. BD Accuri® C6 is manufactured with standardized fluorescence performance so that users do not need to adjust detector voltages. Data is digitally collected over a 7-decade dynamic range (16 million channels of digital data), making all data available to users as needed. A unique low-pressure pumping system drives the fluidics. A sheath-focused core enables event rates of up to 10,000 events per second and a sample concentration of over 5 x 106 cells per mL. In addition, the system derives sample volume and can calculate absolute counts or sample concentration per microliter. The non-pressurized system of BD Accuri C6 supports any brand of sample tubes – 12 x 75 mm or smaller (including microcentrifuge tubes), made of polypropylene or polystyrene. Vwiqpu BD Accuri® C6 CFlow SAMPLER supports the high throughput and fully automated acquisition from 48- and 96-well plates and deep-well plates. It is also supplied with a 24-tube rack for the walk-away acquisition of standard 12 x 75-mm tubes. Software version 1.026421

Listing

Österreich

6,437 km

Waterjet cutting machines

Flow Mach 200-400

Call

Condition: ready for operation (used), Year of construction: 2021, Operating hours: 170 h, Control Unit Brand Flow Kzvekqm7mb Main Drive Number of axis 5 This Flow Mach 200-400 Waterjet cutting machine was manufactured in the year 2021 in the United States and has 170 production hours. It is equipped with a Flow control unit. The machine has a cutting area of 4.0 x 2.0 m. Application Types Water Cutting

Auction

Günzburg

6,760 km

Waterjet cutting system

FLOW

17 days left

Details

Condition: used, Waterjet cutting system, manufacturer: FLOW, max. cutting range 2,000 to 3,000 mm, accuracy - /+ 0.025/300 mm, positioning accuracy +/- 0.08 mm, repetition accuracy +/- Bhwku7bkqtc 0.025 mm, with high-pressure pump, direct drive, manufacturer: QUANTUM, 3,400 bar, with cooler and sand feed, SICK laser safety device, incl. 12 big bags of Kominex Garnet Premium S80 Mesh garnet sand, no type plate can be found Damage: according to statement pump defective

Advertise now from €2.99*
10 million buyers are waiting for you

Call

Inform now
+44 20 806 810 84

Advertise now

*per listing / month

Listing

Travčice

6,493 km

Herstellung von Obst und Gemüsekonzentr

BUCHER,WIGANT,MEMRA FLOW

€3,00,000

Fixed price plus VAT

Call

Condition: good (used), Hiermit wir Ihnen bieten die Technologie zur Herstellung von Obst- und Gemüsekonzentrat an. Die Technologie besteht aus: Dmxirn 2x Press BUCHER HP 500 funktionsfähig mit Ersatzfiltern 1x WIGANT Verdampfungseinheit funktionsfähig, 3 Stufen der Konzentration mit einer Kapazität von 6000 Litern pro Stunde. 1x Filteranlage MEMRA FLOW Simatic Programm mit einer Kapazität von 12.000 Lire pro Stunde. 3x Edelstahl-Behälter alle Verbindungsrohre und Verkabelung. Die Anlage muss von Käufer selbst demortiert und abtransportiert werden. Mehr Bilder auf Anfrage. Preis ohne MwSt. Erstkontakt per E-Mail bitte.

Listing

Støvring

6,848 km

Flow Pump 20 X

Flow 20x + DX

€15,000

ONO plus VAT

Call

Condition: good (used), Year of construction: 1997, 2 pieces Flow Waterjet pump, sold together, almost new hydraulic pump on one of the pump Btc8ljost

Discover more used machines

Waterjet cutting machines

Waterjet

Water jet cutting machine

Water cutting

Waterjet sweden

Water-jet cutting equipment and machines

Water jet cnc

Water jet cut

Water jet

Waterjet

Listing

20 Vaux Rd, Finedon Road Industrial Estate, Wellingborough NN8 4TG, UK

7,524 km

WATERJET CUTTING MACHINES

Flow IFB 3618

Call

Condition: good (used), Year of construction: 2007, Flow IFB 3618 50hp pump Bev87weol20 3.6m x 1.8m cutting area YOM - 2007

Listing

Wiefelstede

(dealership location)

6,929 km

Gate valve with stainless steel flange connection

Kingdom Flow Control DN50 PN40

€220

Fixed price plus VAT

Call

Condition: used, Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Material: 1.4408 stainless steel Mznqp -without: drive -Connection: DN50 -Width: 152 mm -Nominal pressure: PN40 -Number: 1x valves available -Price: per piece -Weight: 9.69 kg/piece

Listing

Tschechien

6,393 km

Waterjet cutting machines

Flow WMC2 4030

Call

Condition: ready for operation (used), Year of construction: 2007, Operating hours: 4,247 h, Control Unit Brand Flow Model FlowMaster 6.0 Movement X-Axis Movement 4000 Y-Axis Movement 3000 Bfmaxjh3uoj Media Pump drive power 4150 Additional Equipment Abrasive material 5 tons Spare high-pressure pump 37 kW Spare parts Cantilever rack This Flow WMC2 4030 Waterjet Cutting Machine was manufactured in the year 2007 in United States. It is operated with a FlowMaster 6.0 control unit and it counts with a pump drive power of 4150 bar. It also has a new pump installed in 2016 and it comes with a water treatment system and an abrasive material hopper. Application Types Water Cutting

Listing

Haßloch

6,910 km

Flow 3D Waterjet Machine CNC 5 Axis

Flow Mach 4 7320 B

€50,000

Fixed price plus VAT

Call

Condition: good (used), Year of construction: 2010, machine/vehicle number: 444416, Flow 3D waterjet machine CNC controlled 5-axis waterjet cutting machine for 2D and 3D production Ba3mjypj Cutting range: X-axis: 7300 mm Y-axis: 2000 mm Z-axis: 200 mm Materials up to 150 mm thickness Accuracy: (+/-) 0.03 mm/m Repeatability: (+/-) 0.05 mm Feed speed: up to 12.7 m/min Cutting speed: up to 7.6 m/min with Hyper Intensive pump type Hyper Jet 100, psi, 6000 bar 480 V, 60 Hz 3 phases with hopper for sand and press-in device Make: Flow Type: ADS, model 24/ll, year 2010 max working pressure: 5 bar test pressure: 12 bar volume 24l, weight 85 kg

Listing

Plemljeva ulica 2, 1210 Ljubljana - Šentvid, Slovenija

6,434 km

FLOW Water Jet MACH3 3020 - only 2341 h

Flow MACH3

€29,000

EXW ONO plus VAT

Call

Condition: ready for operation (used), Year of construction: 2013, The machine has all the service history, we are the second owner. Very little use, full service history. Regularly maintained at an authorized FLOW Europe service. The machine has a damaged cutting arm, cables and hoses need to be replaced...repair approx. 5000 EUR !!!. Chch9dpd Option to buy only pump. The pump has just been serviced, pump model FLOW 50IS - 4150 BAR 37KW - the pump has only 2341 hours of operation !!!!

Listing

Hostivice

6,482 km

Hight Pressure Pump 6000bar

Flow

Call

Condition: used, Year of construction: 2015, HP pressure pump, 6000 bar, functional Ckkor0h7iu

Listing

Olching

6,681 km

Waterjet cutting machines

Flow FLOW Mach 200 Pivot+ Waterjet

Call

Condition: new, Cutting range : Travel X : 4.000 mm Y travel :2,000 mm Z-axis stroke :203 mm workpiece length X max. :4.100 mm Workpiece width Y max. :2.100 mm Cutting head technology Type :Pivot+ Waterjet technology Cutting angle (bevel and 3D cutting) :max. 60°. Machine speed : Traversing speed max :10 m/min cutting speed :max. 7,5 m/min Acceleration :0,05 g Machine accuracy Linear accuracy X/Y :± 0.04 mm/m Repeatability X/Y :± 0.04 mm (complete working range) Circular test :± 0.095 mm High pressure pump Type :HyPlex Power: 22 kW / 30 PS / 3.1 L/min Max. pressure: 4.150 bar B80zxheuin Equipment Tapping aid: Flow UltraPierce Clean water processing: Clean water conversion kit

Listing

Darmstadt

6,884 km

Flow Waterjet Mach500

Flow Mach500

Call

Condition: new, Year of construction: 2023, Mach500 Cutting range : Travel X : 4.000 mm Y travel :2,000 mm Z-axis stroke :305 mm workpiece length X max. :4.100 mm workpiece width Y max. :2.100 mm Cutting head technology Type :Dynamic Waterjet Technology Cutting angle (bevel and 3D cut) :max. 57°. Cuts 2-D and 3-D parts with tight tolerances at high speeds 8xwuuts7pm Machine speed Traversing speed max. :17.8 m/min Cutting speed max. :12.7 m/min Machine accuracy Linear accuracy X/Y :± 0.04 mm/m Repeatability X/Y :± 0.025 mm (complete working range) Circular test :± 0.064 mm High pressure pump Type :HyPlex Power: 22 kW / 30 PS / 3.1 L/min Max. pressure: 4.150 bar Equipment Tapping aid: Flow UltraPierce Clean water processing: Clean water conversion kit Various models immediately available

Listing

Switzerland

6,913 km

Waterjet cutting machines

Flow M2 3120 B

Call

Condition: ready for operation (used), Year of construction: 2011, Operating hours: 37,059 h, Table Outer length 2000 mm Outer width 3000 mm Dmxlaf This FLOW M2 3120 B Waterjet cutting machine was manufactured in the year 2011 and has 37059 production hours. The machine a has a power of 8,5 kW. Application Types Water Cutting

Listing

Haßloch

6,910 km

Flow High pressure pump 20X

Flow International 20X

€27,500

Fixed price plus VAT

Call

Condition: ready for operation (used), HD pump is completely overhauled. All spare and wear parts new. Busp2dsner

Listing

Erkelenz

7,047 km

Water jet machine

Flow IFB

Call

Condition: good (used), Year of construction: 2006, The machine is in a very good condition Fully functional Manufacturer: Flow Year of construction: 2006 Type: IFB Model: IFB 12” Base B9jlmv3mw8 Serial No.: 365 591 Laser type: Renishaw Transport dimensions Forklift bags 170x100 mm Total height 2200 mm Overall width 4800 mm Total length 4500 mm Basin Length 4250 mm Width 2550 mm Visiting before purchase possible and desired. Sale in the is condition as seen on the pictures

Listing

Hostivice

6,482 km

Water Jet Flow Fly Bridge

Flow WJ3020

Call

Condition: used, Year of construction: 2008, WaterJet Flow, cutting area 3000x2000mm, Fly bridge, abrasive transport, control system, abrasive dispenser, machine was used, fully functional Ckkn0smgog

Listing

Totton

7,596 km

Flow Waterjet WMC2 Dual Head 3mx2m

Flow WMC2

€25,000

ONO plus VAT

Call

Condition: like new (used), Year of construction: 2003, Operating hours: 9,500 h, machine/vehicle number: WMC2, 2D Flow Waterjet in operational condition. X 3000mm Y 2000mm Z 200mm. 60 KPsi 100HP intensifier pump for running dual head cutting. Circa 8500 operational hours. The sale comes included with various spare parts both electrical and mechanical. A number of original Flow spare components for the pump. General Comments - Water veyour cleaning system - Recently reconditioned ADS (Abrasive delivery system) - Automated Greasing system - Low-pressure pre-pierce functionality for Brittle/Laminate materials - Excellent Dimensional tolerance in cutting - Noise-cancelling pump housing Spare Parts & Maintenance - Original Flow Check Valves bodies, brand new replacements including seals x3. - Original Flow Check Valve maintenance kits, brand new replacements x4 - Original Flow On/Off Valve, brand new replacement x1 - Original Flow HP Maintenance Kit, brand new replacements x2 - A number of various spare parts consisting of old valves, nuts, plumbing, intensifier specific maintenance tools etc Vvbm0q - Extensive service history of machine - Electrical wiring diagrams (physical and digital copies) - All manuals for the machine including servicing manuals - Flow Software installation disk and user manuals - Machine controller backup installation disks (tested and fully functional)

Listing

Darmstadt

6,884 km

Flow Waterjet Mach200

Flow Mach200

Call

Condition: new, Year of construction: 2023, Mach200 Cutting range : Travel X : 4.000 mm Y travel :2,000 mm Z-axis stroke :203 mm workpiece length X max. :4.100 mm workpiece width Y max. :2.100 mm Cutting head technology Type :Pivot+ Waterjet Technology Cutting angle (bevel and 3D cut) :max. 60°. Machine speed Traversing speed max. :10 m/min cutting speed max. :7,5 m/min Machine accuracy Linear accuracy X/Y :± 0,04 mm/m Repeatability X/Y :± 0.04 mm (complete working range) Circular test :± 0.095 mm High pressure pump Type :HyPlex Power: 22 kW / 30 PS / 3.1 L/min Max. pressure: 4.150 bar Djv0xd Equipment Tapping aid: Flow UltraPierce Clean water processing: Clean water conversion kit Various models immediately available

Listing

Spain

7,950 km

Waterjet cutting machines

Flow Mach3 4020B

Call

Condition: ready for operation (used), Year of construction: 2013, Control Unit Brand Flow This Flow Mach3 4020B Waterjet cutting machine was manufactured in the year 2013 in the United States. It is equipped with a Flow control unit. The machine has a cutting area of 4000 x 2000 mm. Application Types Crkfjssj Water Cutting

Listing

Haßloch

6,910 km

High pressure Pump Flow 9XVS-55

Flow International 9XVS-55

€14,999

Fixed price plus VAT

Call

Condition: not inspected (used), Year of construction: 1994, Operating hours: 41,564 h, machine/vehicle number: 894-3421, HD pump is completely overhauled. All spare and wear parts new. Jinbeyc

Listing

Warren

12,778 km

Spline Roller

Roto-Flow 3225

Call

Condition: used, machine/vehicle number: 4484, 3225 ROTOFLOW SPLINE ROLLER STANDARD SPECIFICATIONS Maximum stroke…………… 762mm Maximum rack length…………… 610mm Brd9mw9k Maximum O.D. of part…………….. 38mm Maximum face width rolled section…………….. 92mm Range – diametral pitches…………….. 20/40 – 32/64 Motor size - HP……………. 15 - RPM……..…………… 1200 Hydraulic tank capacity……………. 100 gallons Machine dimensions…………….. 2134mm L x 2007mm D x 1753mm H Weight – approximately…………… 10,000 kg EQUIPPED WITH Electrical control panel for semi-automatic operation. Coolant pump w/Integral motor. Universal head stock. Standard live centers. Over-arm to suit. Hydraulic power unit – externally located. Machine set up on 440 volts.

Listing

Darmstadt

6,884 km

Flow Waterjet Mach 100

Flow Mach100

Call

Condition: new, Year of construction: 2023, Mach100 Cutting range : Travel X : 4.000 mm Y travel :2,000 mm Z-axis stroke :180 mm workpiece length X max. :4.100 mm workpiece width Y max. :2.100 mm Cutting head technology Type : Cutting head PASER 4 2D Machine speed Traversing speed max. :10 m/min Cutting speed max. :5 m/min Machine accuracy Linear accuracy X/Y :± 0,1 mm/m Repeatability X/Y :± 0.06 mm (complete working range) Circular test :± 0.1 mm High pressure pump Type :HyPlex Power: 22 kW / 30 PS / 3.1 L/min Max. pressure: 4.150 bar Equipment Tapping aid: Flow UltraPierce Clean water processing: Clean water conversion kit Djv0wf Various models immediately available

Listing

France

7,377 km

Waterjet cutting machines

Flow MACH4 4060 XD

Call

Condition: ready for operation (used), Year of construction: 2014, Operating hours: 780 h, Control Unit Brand Flow Main Drive Number of axis 5 This Flow MACH4 4060 XD Waterjet Cutting machine was manufactured in the year 2014. It is equipped with a Flow control unit and has 5 axis. The machine has a working pressure of 6000 bar. Xljykl0i Application Types Water Cutting

Listing

Germany

6,760 km

Waterjet cutting machines

Flow WMC 2 4020 Mach 4

Call

Condition: ready for operation (used), Year of construction: 2003, Operating hours: 6,580 h, General Data Measurements width 4000 mm Measurements depth 2000 mm 3vjqj0tyu7 This Flow WMC 2 4020 Mach 4 Waterjet Cutting machine was built in the year 2003 and has 6580 pump hours. The machine has a 78000 PSI pump 75KW. Application Types Water Cutting