Condition: used, Year of construction: 1994, Technical details: tank capacity: 150 l operating pressure: 11 bar dimensions L x W x H: Ø 550 mm x H: 1,2m weight: ca. 60 kg For sale as shown and described, as an unpressurised tank for a sale at low price. Condensation drain valve at the bottom with hand lever Fpslrdsu Nz Tij I T Deg 2 connection pieces 1/2 inch 2 connection pieces on the ceiling side 2 inch with blind plugs Boiler/tank Ø 450 x 1000mm upright on tripod stand Temperature max. +50°C / min. 10°C pressure gauge *

Condition: new, Year of construction: 2025, CORMAK vane compressors are devices with simple and reliable operation. Thanks to their design, in which the number of moving elements has been reduced to a minimum, they ensure long-term operation with minimal technical maintenance requirements. Vane compressors are distinguished by their compact design , which allows them to be installed in a small area. Additionally, thanks to the low rotational speed of the compression elements, our vane compressors are extremely quiet , which allows them to be used in various working environments. Vane compressors are particularly valued where it is required to provide a constant air flow at a stable pressure. Principle of operation of a vane compressor : Rotor and housing : The rotor of a vane compressor is placed eccentrically in a circular housing, which means that its axis of rotation does not coincide with the axis of the compression chamber. Sliding blades are mounted in the grooves of the rotor, which, under the influence of centrifugal force, move outwards during rotation. Blade action : As the rotor rotates, the blades extend and adhere to the inner wall of the housing. In this way, they create closed chambers between themselves, the rotor and the housing. Air suction : As the rotor rotates, larger volume spaces are created in the housing into which air is drawn. The suction process begins when the blades are in the larger volume section, where the pressure is lower. Compression : As the rotor continues to rotate, the blades move closer to the housing. This reduces the volume of the enclosed space, which compresses the air or gas. Exhaust : After reaching the maximum pressure, the compressed air is pushed out through the exhaust port. The exhaust process takes place when the chamber with compressed air reaches the section where the exhaust port is located. Cooling and Lubrication : The blades are usually lubricated with oil, which also seals the spaces between the blades and the housing. The oil also helps cool the compressor, which helps it maintain consistent performance and longer life. Advantages of vane compressors: Constant air flow : Vane compressors are characterized by a constant, stable supply of compressed air without large pressure fluctuations. Simple design : The operating mechanism of the vane compressor is relatively simple, which translates into lower failure rates. Quiet operation : Compared to piston compressors, vane compressors operate quietly and generate less vibration. Long-term operation : Thanks to a well-designed lubrication system, the blades can operate for a long time while maintaining high efficiency. COMPLETE DOCUMENTATION FOR UDT The documents include: Declaration of conformity, Tank certificate with technical drawing, Safety valve certificate, User manual in English Fpslrd Ijvzz N Ds T Djg Technical data Dimensions 750x600x820mm Weight 146 kg Power 4.5kW Outlet port diameter G3/4" internal Efficiency at 6 bar 500L/min. Tension 400V Manufacturer: Cormak

Condition: used, Screw compressor Manufacturer : KAESER Model : CS121 Output pressure: 7.5 bar Fpslrd I Tev Aha Ee Deg Capacity of one booster: 750 m3/h Year of manufacture: 2000 Technical condition: used machine, operational

Condition: new, Year of construction: 2025, HP 40 Inverter Fpjlrjvntc Njd I T Deg Pressure 8 bar

Condition: good (used), Year of construction: 2011, noise level: 68 dB, Equipment: compressor, Manufacturer: Almig Model: Belt 37-10 Year: 2011 Productivity: 5150 L/min, Max 10 Bar Motor: 37 kW Working hours: 33 315 h Power: 400V / 50HZ / 3 F Noise Level: 68 dB Weight: 590 kg Dimensions: 1270 x 890 x 1190 mm The compressor is in good condition and maintained. During the maintenance has been exchanged the oil, oil filter, air filter and engine bearings. * The compressor is compact * Simple construction and reliable * Working hours 33315h, of which only 22704h under load. Fpelrdsqxq Hus I T Djg Warranty 6 months!

Condition: like new (used), Year of construction: 2020, Functionality: fully functional, overall weight: 215 kg, total length: 987 mm, total width: 480 mm, total height: 1,234 mm, power: 7.5 kW (10.20 HP), pressure (max.): 8 bar, BOGE compressed air center C 9 LFDR -270 Fpoljv Il U Rerd I T Deg Screw compressor and BOGE refrigeration compressed air dryer on an underlying compressed air tank air-cooled with integrated frequency control New price: €8,300 plus VAT, built in 2020

Condition: refurbished (used), Year of construction: 2019, Functionality: fully functional, compressed air connection: 7 bar, volume flow: 25 m³/h, total width: 440 mm, total length: 200 mm, total height: 820 mm, pressure: 7 bar, operating pressure: 16 bar, pressure dew point: -70 °C, input voltage: 240 V, ambient temperature (max.): 50 °C, ambient temperature (min.): 1 °C, Refurbished Parker/Zander adsorption dryer with attached filters. The system has been completely serviced and all wearing parts replaced. Fslrdevpgadj I T Dspg

Condition: good (used), Year of construction: 2015, machine/vehicle number: 1143, overall weight: 550 kg, volume flow: 243.6 m³/h, pressure (max.): 8 bar, MANUFACTURER KAESER TYPE ASK40 S/N 1143 YEAR 2015 CAPACITY (kW) 22 OUTPUT (m3/min) 4.06 CIS (bar) 8 INVERTER no BUILT-IN DRYER no EXCHANGER no COOLED (AIR/WATER) no Fjlrd I Tsv Dthqs Djpg ON TANK no DOCUMENTS no CONNECTION 1 1/4 NEW/USED USED

Condition: ready for operation (used), Year of construction: 1999, Max. operating pressure: 7 bar Effective delivery rate: 150 l/min Fpolrdjd Hkwuo I T Dog Drive motor: 380 V, 1.1 kW Space requirement: 900 x 350 x 415 mm

Condition: new, Year of construction: 2025, C43 airend Motor power 5.5 kW Pressure 8 bar Fpjlrevpgclsd I T Djg FAD 888 l/min – 53 m3/h Power supply 400 V – three-phase -50 Hz Start YD Noise level 66 dB Connections 3/4″

Year of construction: 2012, Condition: new, machine/vehicle number: 201403250027, On sell high pressure two stage rotary screw drill compressor - Sullair 20/12. The Screws are suitable with Sandvik Drilling Rigs. We have a few pcs of them. Fpolsilqphord I T Djg Brand new units. Specs: Model: 20/12 Series 1500 Capacity (cfm): 1500 RPM: 2100 Rated Pressure (psig): 350 Approx Weight (kg): 1066 Dimensions : L x W x H 47" x 34.8" x 42" (120x91x106cm) Considering that's the more popular in the USA, It can be delivered to Chicago on our cost. If you're interested, feel free to contact me.

Condition: like new (used), Year of construction: 2020, Functionality: fully functional, overall weight: 226 kg, total length: 634 mm, total width: 1,610 mm, total height: 1,254 mm, power: 5.5 kW (7.48 HP), pressure (max.): 10 bar, BOGE compressed air center C 7 LDR 160 Screw compressor with BOGE energy-saving refrigeration compressed air dryer  Fpolov Il Spord I T Djg on a compressed air tank mounted underneath air-cooled with integrated frequency control New price: €8,150 plus VAT, built in 2020

Condition: good (used), compressed air tank, pressure vessel, pressure tank, compressed air vessel, pressure vessel, compressor tank, compressed air container, compressed air storage -Manufacturer: Festo, compressed air tank compressed air reservoir from vertical lathe Scherer VDZ 80 DS -Type: CRVZS-5 -Content: 5 L -Operating pressure: 16 bar Felrdjvw Rlao I T Dspg -Accessories: incl. attachments see photos -Dimensions: 430/160/H220 mm -Weight: 4.3 kg

Condition: good (used), Year of construction: 2015, machine/vehicle number: API173019, overall weight: 1,670 kg, volume flow: 1,005 m³/h, pressure (max.): 10 bar, Equipment: type plate available, We offer: ALUP ALLEGRO90 SN: API173019 YEAR: 2015 CAPACITY: (kW) 90 OUTPUT: (m3min) 16.75 CIS: (bar) 10 Fslrdev Dr Nyj I T Dopg INVERTER: yes BUILT-IN DRYER: no EXCHANGER: no COOLED: (AIR) air ON THE TANK: no DOCUMENTS: no NEW/USED: USED

Condition: new, Year of construction: 2024, new atlas copco compressor (we are atlas copco dealers), super discounted price. worldwide warranty main features: max bar 10 air flow liters/min 1800 Foljvq N H Ajrd I T Djpg power 15kw/20hp possible to combine atlas dryer on request list price euro 12300

Condition: good (used), Year of construction: 2006, Screw compressor MARK Type: MAS 7,5KW Year 2006 Power 7,5KW Pressure : 10 Bar Fpolrd Ijtx Akne T Djg Dimensions: L100cm X W 62 cm X H 105 cm Weight: 215 KG Ready to use condition.

Condition: excellent (used), Year of construction: 2014, volume flow: 0.24 m³/h, operating pressure: 10 bar, INGERSOLL RAND R 2.2 - 10 screw compressor on a 200 l pressure tank Fslrd Isrur N Aj T Dopg 2.2 kw engine Capacity 0.25 m3/min Pressure 10 bar Year of production: 2014 Mileage 5547 hours THE COMPRESSOR IS FULLY FUNCTIONAL

Year of construction: 2025, Condition: new, Compressed air dryer's goal is to lower the temperature of compressed air and remove the water and oil particles in the airflow. It is a two-step process. First step Initially, compressed air arrives at the air-air heat exchanger, where it is cooled, in the counterflow current, by the air leaving the evaporator. Second step In the second step it moves to the cooling circuit evaporator, where the temperature of compressed air is lowered to a dew point by the coolant factor. During both of these steps almost all oil and water in the compressed air liquefy. Leaving the dryer, air comes through a highly efficient separator, where liquefied condensate is separated from air, and removed externally through an automatic draining valve. Afterwards, the air after being separated from the condensate returns to the heat exchanger, where it is reheated, in turn decreasing the relative humidity of the compressed air. Cooling system is designed to automatically adjust the efficiency of cooling, dependent on the amount and the temperature of the air to be treated. This is achieved due to a variable speed fan. Technical data Inlet/outlet tube diameter (BSP) 1" Inlet temp =< 38 degrees C 3 degrees C dew point Up to 16 Bar pressure 1500 L/MIN efficiency 0.29 kW power 230V voltage Fpelrjmt Dbhed I T Dog Dimensions: 700x420x650 mm 45 kg weight Refrigerant: R134a, 400g The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: good (used), Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter Fpelrsh Ra H Ssd I T Djg -Manufacturer: Mann Hummel, Piclon air filter with filter element -Filter type: C 30 850/2 -Maintenance display: Knecht TB 745/1 -Accessories: incl. connection pipe -Number: 6x air filters available -Price per piece -Dimensions: 700/403/H610 mm -Weight: 24 kg/pc.

Condition: good (used), Year of construction: 2020, machine/vehicle number: ITJ400414, overall weight: 264 kg, volume flow: 96 m³/h, pressure (max.): 8.25 bar, Equipment: refrigerant dryer, type plate available, We offer: ATLAS COPCO GA11FF SN: ITJ400414 YEAR: 2020 CAPACITY: (kW) 11 OUTPUT: (m3min) 1.6 CIS: (bar) 8.25 INVERTER: no BUILT-IN DRYER: yes EXCHANGER: no COOLED: (AIR) air ON THE TANK: no Felrd I Tsv Dr Dwj Dopg DOCUMENTS: no NEW/USED: USED

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: API260265, overall weight: 279 kg, volume flow: 150.6 m³/h, pressure (max.): 12.75 bar, Equipment: refrigerant dryer, type plate available, We offer: ATLAS COPCO GA15VSDFF PLUS Fpjlrd Iev Drw Ro T Dog SN: API260265 YEAR: 2016 CAPACITY: (kW) 15 OUTPUT: (m3min) 2.51 CIS: (bar) 12.75 INVERTER: yes BUILT-IN DRYER: yes EXCHANGER: no COOLED: (AIR) air ON THE TANK: no DOCUMENTS: no CONNECTION: 1 NEW/USED: USED

Condition: good (used), Year of construction: 2017, machine/vehicle number: API262376, overall weight: 279 kg, volume flow: 150.6 m³/h, pressure (max.): 12.75 bar, Equipment: refrigerant dryer, type plate available, We offer: ATLAS COPCO GA15VSDFF PLUS Technical data: YEAR: 2017 CAPACITY (kW): 15 OUTPUT (m3/min): 2.51 CIS (bar): 12.75 Fpolrd I Tjv Drrbo Dog HOURS (DOC/GENERAL): 25107 INVERTER: yes BUILT-IN DEHUMIDIFIER: yes

Condition: good (used), Year of construction: 2018, machine/vehicle number: API838388, overall weight: 480 kg, volume flow: 225 m³/h, pressure (max.): 12.75 bar, Equipment: type plate available, We offer: screw compressor, Atlas Copco GA18VSDFF PLUS compressor Technical data: Power: 18.5 kW Efficiency - 3.75 m3/min. Maximum pressure: 12.75 bar, year of manufacture: 2018 Fpslev Drmrerd I T Djg INVERTER: yes BUILT-IN DEHUMIDIFIER: yes NEW/USED USED

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: API269757, overall weight: 271 kg, volume flow: 114 m³/h, pressure (max.): 12.75 bar, Equipment: refrigerant dryer, type plate available, Technical data: Power: 11 kW Efficiency 1.9 m3/min. Maximum pressure: 12.75 bar, Year of manufacture: 2019 New Inverter!!! BUILT-IN DEHUMIDIFIER: yes Felrd Isv Driaj T Dspg NEW/USED: USED

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: API268625, overall weight: 271 kg, volume flow: 150 m³/h, pressure (max.): 12.75 bar, Equipment: refrigerant dryer, type plate available, We offer: ATLAS COPCO GA15 VSDFF PLUS Technical data: S/N: API268625 YEAR: 2019 Felrd Iov Drglj T Djpg CAPACITY (kW): 15 OUTPUT (m3/min): 2.5 CIS (bar): 12.75 INVERTER: yes BUILT-IN DEHUMIDIFIER: yes EXCHANGER: no NEW/USED: USED