Used Oil Free Screw Compressor for sale (23,564)

Condition: used, Year of construction: 2016, operating hours: 1,745 h, power: 5.5 kW (7.48 HP), volume flow: 0.59 m³/h, pressure (max.): 7.75 bar, Equipment: documentation/manual, refrigerant dryer, type plate available, Atlas Copco SF6FF oil-free scroll compressor including refrigerant dryer Technical data Manufacturer: Atlas Copco Type: SF6FF Year of manufacture: 2016 Design: oil-free screw compressor Operating hours: 1745 h Design: Full Feature (FF) Motor power: 5.5 kW / 7.0 hp Supply voltage: 400 V Frequency: 50 Hz Phases: 3 phases Gedpfxez Eqrpj Ap Debu Max. operating pressure: 7.75 bar Volumetric flow: 8.0 l/s Flow rate: 0.59 m³/min Speed: 2,905 rpm Weight: approx. 268 kg Compressed air quality: oil-free, ISO 8573-1 Class 0 Country of manufacture: Belgium Including Atlas Copco refrigerant dryer The system is equipped with a suitable Atlas Copco ID11 C1/2 UL-IEC refrigerant dryer. Type: ID11 C1/2 UL-IEC Year of manufacture: 2016 Product no.: 4102001860 Refrigerant: R134a Max. operating pressure: 16 bar Electrical connection: 230 V / 50–60 Hz / 1 phase Power consumption: 0.256 kW

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF 7.75 bar / 112 PSI Year 2015 Gbsdpfx Apey Iplfj Deu 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM 8.9 CFM / 4.21 lts/s Very little use Ex Pharma Facility

Condition: excellent (used), Year of construction: 2017, operating hours: 36,000 h, functionality: fully functional, overall weight: 1,890 kg, total length: 2,200 mm, total width: 1,420 mm, total height: 2,050 mm, motor manufacturer: Garden Denver, power: 75 kW (101.97 HP), fuel type: electric, volume flow: 684 m³/h, operating pressure: 10 bar, type of cooling: water, Equipment: type plate available, Oil-free screw compressor PUREAIR Compair D75HRS 10A 75kw 10 bar 11.4m3/min with frequency converter CompAir D75HRS-10 oil-free, water-injected, Dryclon series frequency converter screw compressor With its 75 kW engine power, it reaches a capacity of 10,320 l/min. The 10 atmosphere operating pressure ensures stable and clean compression, making it ideal for use in areas where air cleanliness plays a key role. COMPAIR D75HRS screw compressor fully serviced, for sale in excellent condition oil-free design, direct drive, controlled by frequency converter. Regulated speed - air and water cooled 75 kW power, air flow: 11.4 m3/min /684 m3/h Built-in frequency converter: Manufacturer: Compair D75HRS 10A Year of manufacture: 2017.12 hours: 36000 Drive power: 75 kW Pressure 10 bar Flow rate: 11.4/min Delco XL controller Main rotor speed: 2980 Gbodpfx Ajw Rcgtsp Dju Voltage: 400 V 50 Hz 3 phase current consumption: 128 A Machine weight: 1890 kg Dimensions: 225 long 142 wide 205 high. If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: 340590, new RENNER SCROLL SL-NEO 7.5 I (8 bar) oil-free compressor Year of construction: 2025 Operating hours: 1 hr Gbjdpfxsv Al Nqj Ap Deu Pressure: 8 bars Rated power: 7.50 kW Delivery quantity: 890 l/min Sound level: 69 dB(A) Compressed air outlet: 1/2" Dimensions length x width x height: 835 x 595 x 935 mm Weight: 195 kg Visit our store. We always have a wide range of new and used compressors in stock! Immediately available.

Condition: new, Year of construction: 2025, operating hours: 2 h, machine/vehicle number: LENTO 55WK, New Speed-controlled, oil free, water injected screw compressor ALMIG LENTO 55 LK Year of construction: 2025 technical spezifications: Type: LENTO 55 WK Possible operating pressures of the system(continuously adjustable): 5 - 12 bar Delivery rate at minimum/maximum speed, measured according to ISO 1217 Annex C: at 5 bar min/max: 1.41 / 7.79 m³/min at 6 bar min/max: 1.40 / 7.74 m³/min at 7 bar min/max: 1.39 / 7.69 m³/min at 8 bar min/max: 1.38 / 7.64 m³/min at 9 bar min/max: 1.37 / 7.59 m³/min at 10 bar min/max: 1.35 / 7.29 m³/min at 11 bar min/max: 1.34 / 6.97 m³/min at 12 bar min/max: 1.33 / 6.71 m³/min Rated power of drive motor: 55 kW Protection / insulation class of drive motor: IE 3Protection / insulation class of fan motor: IP 54 / H Operating voltage / frequency at min. / max. speed: 380 / 41/200 V/Hz Residual oil content: 0 mg/m³ Cooling water requirement at 100% load( at inlet +15° / delta t = 15 K ): 55 l/min Cooling water outlet (max): 45 °C Cooling water pressure (min / max): 2 / 10 bar Cooling water quantity (min / max): 140 l/min Cooling water quality according to the valid "ALMiG cooling water conditions" Pressure dew point of refrigerant dryer at 50% load: 3 °C Gsdpfx Apsc Rt D Nj Djbu 100% load: 3 °C Sound pressure level (DIN 45635 T.13) soundproofed, at 50% load: 75.6 dB(A) 100% load: 78.2 dB(A) Length: 2,300 mm Width: 1,400 mm Height: 1,580 mm Weight: 1,690 kg Compressed air connection: G 1 1/2 inch Visit our shop, we always have a large number of new and used compressors in stock.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Equipment: documentation/manual, type plate available, Oil-Free Screw Compressor RENNER RSF 250 D – 250 kW – 45,000 l/min – Year 2015 Technical Specifications • Manufacturer: RENNER Kompressoren • Model: RSF 250 D • Year of manufacture: 2015 • Serial number: 545073 • Motor power: 250 kW • Air flow rate: 45,000 l/min (45 m³/min) • Working pressure: 7.5 bar • Maximum permissible pressure: 13 bar Gedpfezm Nhnjx Ap Dobu • Soundproofed enclosure • Electronic control with digital display • Fully automatic operation • Industrial design for continuous service

Condition: used, This listing is for the Bambi VTS 150D Oil Free Dry Air Gjdpfx Apoy H Dv Ae Dsbu The unit is in full working condition and ready for immediate use. Compact and ultra-quiet, this oil-free compressor delivers clean, dry air for sensitive laboratory applications, including analytical instruments and medical devices. Built for reliability and low maintenance operation. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: like new (used), Year of construction: 2016, operating hours: 46,000 h, functionality: fully functional, overall weight: 1,890 kg, motor manufacturer: garden denver, power: 75 kW (101.97 HP), fuel type: electric, volume flow: 684 m³/h, operating pressure: 10 bar, noise level: 75 dB, type of cooling: water, color: blue, Equipment: type plate available, Oil-free Screw Compressor Compair D75HRS 10A 75kw 10 bar 11.4m3/min with frequency converter COMPAIR D75HRS Screw Compressor fully serviced, for sale in excellent condition oil-free design, direct drive, controlled by frequency converter. Gjdpfjw Nzrfjx Ap Dobu Regulated speed - air and water cooled 75kw power, air flow: 11.4 m3/min / 684m3/h Built-in frequency converter: Manufacturer: Compair D75HRS 10A Year of manufacture: 2016.11 hours: 46000 Drive power: 75Kw Pressure 10 bar Flow rate: 11.4/min Delco XL controller Main rotor speed: 2980 Voltage: 400v 50Hz 3 phase 85A Machine weight: 1890 kg Dimensions: 225 long 142 wide 205 high.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 6214330001, overall weight: 89 kg, total height: 950 mm, power: 2.2 kW (2.99 HP), pressure (max.): 8 bar, noise level: 60 dB, new oil-free DENTAL piston compressor Dr Sonic 320-50-W-ES with attached double column adsorption dryer with sound insulation box and additional fan Gbodpfx Apsvlw Hao Dsu Oil-free piston compressor, two-cylinder, single-stage, max pressure 8 bar, built on 50 lt. internally coated tank with attached adsorption dryer. Ideal for 3 dental chairs – minimal space requirement due to compact design. Specifications: Type : Dr. SONIC 320-50-W-ES-3M Operating overpressure max : 8 bar Suction capacity : 320 l/min Effective delivery rate at 6 bar*) : 210 l/min Number of steps : 1 Number of cylinders : 2 Compressor speed : 1400 1/min Nominal power drive motor : 2,2 Motor protection class / insulation class : IP 54 / F Operating voltage / frequency : 230 /50 V/Hz Sound pressure level (DIN 45635 T13) : 60 dB(A) Tank volume : 50 litres Width : 700 mm Depth : 500 mm Height : 980 mm Weight : 89 kg Compressed air connection : G 3/8

Condition: good (used), Year of construction: 2003, MANUFACTURER: ATLASCOPCO MODEL: ZT18 SERIAL NO.: AII702327 YEAR: 2003 POWER (kW): 18.5 CAPACITY (m3/min): 2.51 Gedpfoxxb Evsx Ap Djbu PRESSURE (bar): 8.6

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: API621725, For sale: Atlas COPCO ZR 132 compressor with filters, 125 KW Gsdpswrm T Iofx Ap Dobu

Condition: used, Year of construction: 2004, Compressor type: Oil-injected rotary screw compressor with integrated refrigerant dryer Motor power: 15 kW (20 HP) Gjdpfx Apjwgca To Dsbu Power supply: 380 V / 50 Hz Operating pressure: 7.5 bar Free Air Delivery (FAD): 798 m³/h (approximately 13.3 m³/min) Noise level: 68 dB(A) Tank capacity: 400 liters Dimensions (L × W × H): 1,000 × 660 × 1,400 mm Weight: 450 kg Cooling: Air-cooled Integrated dryer: Yes Control system: Elektronikon®

Condition: like new (used), Year of construction: 2013, Manufacturer: Kaeser Kompressoren, Germany YOM 2013 Maximum Pressure: Up to 13 Bar Productivity 8.26 cubic meters/min Energy Efficiency: The direct drive coupled with IE4 efficiency motors (or IE5 on SFC models) ensures superior energy efficiency. Low Maintenance: Components are designed for long service life, with easy access for maintenance. SIGMA Control 2: Ensures efficient monitoring and control of the compressor. Rotary compressor type Screw by lubrication Oil Noise level 70 dB Height 1900 mm Gbjdoyy U Shopfx Ap Dsu Length 1110 mm Width 1760 mm Weight 1250 kg Electrical parameters Mains voltage 380~400 V Power consumption 45 W Current frequency 50 Hz User characteristics Compressor cooling system Water cooling is possible, with subsequent use of heat. Complete system ready to use fully automatic extremely effective sound insulation vibration insulation powder-coated housing parts for ambient temperatures up to +45°C easy maintenance: lubrication nipples for motor bearings are located on the outside (also for fan motor).

Condition: used, Year of construction: 2002, Air compressor (oil-free) CompAir R 180 Model R 180 TS-Z11 Gedju Rphqspfx Ap Djbu Year of construction: 2002 Weight: 3860 kg Volume flow: 17.0 m³ / min Intake pressure: 1 bar Stage pressures: 2.4 / 12 bar Installed motor power: 110 kW The compressor was regularly serviced and inspected until it was decommissioned.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Equipment: documentation/manual, refrigerant dryer, type plate available, Container includes the following contents: - 10ft storage container, new / Color: Anthracite grey - SSC-Strong 37 Vario • Speed-controlled screw compressor • Free air delivery at 8 bar: 6.3 m³/min • Dimensions (LxWxH): 1432 x 1000 x 1480 mm • Weight: 705 kg - 2 compressed air tanks, 500 l each o With AD2000 certification o Horizontal design - 2 Ecomat 31 condensate drains - 2 sets of fittings - SCC refrigerant dryer DRA480 o ISO 8573-1 Class 4 o Refrigerant: R407C o Capacity: 480 m³ - Pre-filter FIL934-P - Fine filter FIL934-M The compressor has seen very little use and therefore has low operating hours. Upon request, we can read the operating hours and run the compressor for demonstration. Gbsdpfx Apsxc T Eve Dsu

Condition: new, Year of construction: 2026, operating hours: 1 h, New speed controlled ALMIG LENTO 15 LK screwcompressor oilfree, compressor is on stock Immediately available. Controller: Air Control HE Technical specifications Type: LENTO 15LK Possible overpressures of the compressor: (infinitely adjustable): 5 to 10 bar Delivery quantity at minimum / maximum speed: at 5 bar min/max : 1,03 to 2,64 m³/min Gjdpfx Asdtm Ndjp Djbu at 6 bar min/max : 1,00 to 2,42 m³/min at 7 bar min/max : 0,97 to 2,20 m³/min at 8 bar min/max : 0,93 to 2,03 m³/min at 9 bar min/max : 0,90 to 1,82 m³/min at10 bar min/max : 0,87 to 1,63 m³/min elektric motor power: 15 kW Operating voltage / frequency: 400/50 V / Hz Residual oil content: 0 mg / m³ SPL: 50% load: 66 dB (A) 100% load: 68 dB (A) Length: 1880 mm Width: 850 mm Height: 1985 mm Weight: 890 kg Compressed air connection: G 1 inch

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, overall weight: 278 kg, operating pressure: 10 bar, pressure (max.): 10 bar, noise level: 67 dB, Equipment: documentation/manual, OIL-LUBRICATED SCREW COMPRESSOR BRAND: FIAC Model: AIRBLOK 15 Gbjdjz Ei Txspfx Ap Dou Maximum Pressure: 10 bar Free Air Delivery (FAD): 1400 l/min Maximum Amperage: 21.1 USED MACHINE INTERNAL CODE: SVR 443

Condition: like new (used), Year of construction: 2017, operating hours: 56 h, functionality: fully functional, total length: 1,976 mm, total width: 974 mm, total height: 1,500 mm, pressure (max.): 13 bar, noise level: 70 dB, nominal flow rate: 240 m³/h, The machine is in like-new condition with only 54 operating hours! Submitting a bid obligates the buyer to collect the machine on the following dates: Monday, October 5, 2026, Tuesday, October 6, 2026, Wednesday, October 7, 2026, Thursday, October 8, 2026, until 12:00 PM. The machine is already in storage. Gedjzzmw Njpfx Ap Dsbu The technical data specified in the advertisement comes from a manufacturer's data sheet. The seller does not guarantee the accuracy of the data. TECHNICAL DETAILS Operating pressure max.: 13 bar Pressure setting range: 4–13 bar Volume flow: 22–66 l/s Volume flow: 1.3–4.0 m³/min Volume flow: 47–140 cfm Sound pressure level: 70 dB(A) MACHINE DETAILS Motor power: 22 kW Dimensions (L x W x H): 1,976 x 974 x 1,500 mm EQUIPMENT Elektronikon Graphic control system Oil-free, water-injected screw compressor ISO 8573-1 Class 0 VSD speed control Further technical data can be found in the attached data sheet.

Condition: excellent (used), Year of construction: 2017, s016677 CREEMERS TYPE: RCA7.5 Gbsdpfxsy Ddfre Ap Dsu S/N: ITJ099846 YEAR: 2017 POWER (kW): 7.5 OUTPUT (m3/min): 1 PRESSURE (bar): 10 OPERATING HOURS (DOC/TOTAL): FREQUENCY INVERTER: no BUILT-IN DRYER: no HEAT EXCHANGER: no COOLING (AIR/WATER): air ON TANK: no DOCUMENTS: no CONNECTION: 3/4 NEW/USED: USED s016691 MAKE: CREEMERS TYPE: EDD1200 S/N: ITJ059524 YEAR: 2017 POWER (kW): 0.475 OUTPUT (m3/min): 2 PRESSURE (bar): 16 OPERATING HOURS (DOC/TOTAL): FREQUENCY INVERTER: no BUILT-IN DRYER: R134a 0.35kg HEAT EXCHANGER: no COOLING (AIR/WATER): no ON TANK: DOCUMENTS: no CONNECTION: NEW/USED: USED owomat

Year of construction: 2023, condition: as good as new (ex-display), Exhibit, immediately available: new RENNER SCROLL SL-I 4.5 (10 bar) oil-free compressor with RENNERtronic Touch control with star-delta Year of construction: 2023 Operating hours: 1 hr The compressor is in stock and available immediately Pressure: 10 bars Rated power: 4.50 kW Delivery quantity: 405 l/min Sound level: 68 dB(A) Compressed air outlet: 1/2" Dimensions length x width x height: 760 x 550 x 920 mm Weight: 181 kg Gbodelnlrzspfx Ap Dou Visit our store. We always have a wide range of new and used compressors in stock! Immediately available.

Condition: good (used), Screw cooling compressor ABB SVA 24, two units in complete YOM 1991 Gsdjyb Sdiopfx Ap Dobu Made in Germany Good working condition

Condition: like new (used), Kaeser M30 PE screw compressor on a trailer The unit is in perfect condition, like new. The unit was purchased from a warehouse and has never been used. Only 50 hours of operation. Technical specifications: Operating pressure: 7 bar 18.2 kW motor Automatic start Gsdpfx Aszz Hilsp Djbu Capacity: 3 m3/min Weight: 595 kg Year of manufacture: 2022/12

Condition: new, Year of construction: 2026, LUFT 1000 COMPACT Screw Compressor with Refrigerated Air Dryer and 270 L Compressed Air Tank The LUFT 1000 COMPACT screw compressor with an integrated refrigerated air dryer and a 270 L compressed air tank is a modern solution designed for reliable and efficient compressed air supply. The CORMAK LUFT series screw compressors combine state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. THE SET INCLUDES: LUFT 1000 COMPACT screw compressor with refrigerated air dryer 270 L horizontal compressed air receiver Are you looking for a professional solution for powering pneumatic tools in a workshop, paint shop or small production line? The CORMAK LUFT 1000 COMPACT screw compressor with refrigerated air dryer is an excellent choice. With a 7.5 kW motor and an impressive actual output of up to 990 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. It can also be used as a compressor for small sandblasting machines. This model has been designed for continuous-duty operation, making it ideal for demanding applications such as tyre service centres, automotive workshops and small manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The screw compressor is also equipped with an integrated refrigerated compressed air dryer, which provides dry and clean air while protecting the compressed air system against corrosion and damage. The LUFT 1000 COMPACT oil-injected screw compressor with dryer features a traditional belt drive, resulting in easier maintenance and lower servicing costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and a worn belt can be easily replaced with a new one. Extended Component Service Life The belt drive also contributes to longer component life. The absence of a rigid connection between the motor and the compressor's working components reduces mechanical wear and stress, helping to extend the service life of the system. The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key machine information and greater flexibility and control over the production process. Gjdpfsmqlprex Ap Djbu Key Parameters ✅ Pressure: up to 10 bar ✅ Air output: up to 990 l/min ✅ Motor power: 7.5 kW Technical Specifications Parameter Specification Motor power 7.5 kW Voltage 400 V / 50 Hz Output at 0–6 bar 990 l/min Output at 6 bar 950 l/min Output at 8 bar 950 l/min Output at 10 bar 930 l/min Outlet connection diameter (G) 3/4" Compressor dimensions 1320 × 650 × 945 mm Dimensions with tank 1495 × 1200 × 1545 mm Weight 350 kg

Condition: new, Year of construction: 2026, LUFT 700 VSD+PM COMPACT Screw Compressor with Refrigerated Air Dryer The LUFT 700 VSD+PM COMPACT screw compressor with an integrated refrigerated compressed air dryer combines state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Gbsdpfjybvkajx Ap Dsu Are you looking for a professional solution for powering pneumatic tools in a workshop, paint shop or small production line? The CORMAK LUFT 700 VSD+PM COMPACT screw compressor with refrigerated air dryer is an excellent choice. With a 5.5 kW motor and an impressive actual output of up to 690 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. It can also be used as a compressor for sandblasting applications. This model has been designed for continuous-duty operation, making it ideal for demanding applications such as tyre service centres, large automotive workshops and manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The screw compressor is also equipped with an integrated refrigerated compressed air dryer, which provides dry and clean air while protecting the compressed air system against corrosion and damage. The LUFT 700 VSD+PM COMPACT oil-injected screw compressor with refrigerated air dryer features a traditional belt drive, resulting in easier maintenance and lower servicing costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and a worn belt can be easily replaced with a new one. Extended Component Service Life The belt drive also contributes to longer component life. The absence of a rigid connection between the motor and the compressor's working components reduces mechanical wear and stress, helping to extend the service life of the system. The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key machine information and greater flexibility and control over the production process. Key Parameters ✅ Pressure: up to 10 bar ✅ Air output: up to 690 l/min ✅ Motor power: 5.5 kW Technical Specifications Parameter Specification Motor power 5.5 kW / 7.5 HP Voltage 400 V / 50 Hz Output at 0–6 bar Average 690 l/min Output at 6 bar 690 l/min Output at 8 bar 650 l/min Output at 10 bar 650 l/min Outlet connection diameter (G) 1/2" Dimensions 1350 × 600 × 850 mm Weight 200 kg

Condition: used, Year of construction: 2016, functionality: fully functional, We are offering a used screw compressor for sale. KAESER screw compressor - SK22 Serial No.: 1558 Year of manufacture: 2016 Rated power: 11.0 kW Motor speed: 2,960 rpm Max. operating pressure: 8.0 bar Ambient temperature: 3 - 45°C Integrated or separate dryer Oil separator Control panel All available attachments Operating hours under load: Unit 1: approx. 2,500 hours Unit 2: approx. 1,000 hours Compressed air tank: 2,000 liters Tank design: hot-dip galvanized Price: €14,500.00 net €17,255.00 gross This is a used item. DESIGN Our sales team will gladly prepare a non-binding offer tailored to your requirements. TRANSPORT & INSTALLATION We will be happy to assist you with the transport and installation of the equipment. TERMS OF PAYMENT Terms of payment will be agreed upon in the event of an order. The price is quoted as a unit price/net price, or as stated in the product description (plus VAT). You will, of course, receive an invoice with VAT shown. Gbsdpfx Aoz Iy Niep Deu ABOUT US DLK in Nordhorn trades in new and used products in the fields of warehouse logistics, conveying technology, storage platforms, textile storage, and machines for retail, industry, and trades. We continuously offer interesting used items from various manufacturers/brands at attractive prices. If you have any questions, please do not hesitate to contact us.