Used engraving machines for sale (121)

Condition: ready for operation (used), Year of construction: 2020, A Panasonic laser marking machine (laser marking station) with a defective laser head is available. Travel X/Y/Z: 500mm/430mm/350mm, marking range X/Y/Z: 720mm/430mm/350mm, machine dimensions X/Y: approx. 800mm/1900mm. Documentation available. On-site inspection is possible. Giedov Rfqqspfx Anxst

Condition: ready for operation (used), Year of construction: 2019, operating hours: 200 h, functionality: fully functional, type of input current: AC, laser power: 700 W, power: 3 kW (4.08 HP), Equipment: cooling unit, cw fiber laser with 750 watts as a stand-alone system or for integration into machines and systems. Godpeph U Anjfx Anxjit Due to its high output power, this water-cooled laser is particularly suitable for tasks where a lot of heat is required in the workpiece. This includes, for example, welding metals or plastics, cutting, material removal or structuring. The optional use of a 2D galvo scanner means that the laser beam can also be guided over the workpiece using software. The laser can be modulated digitally and analogue (power setting) and can also be controlled and monitored using control software. The images show a setup with a galvo scanner. The system can also be optionally equipped with a welding head or cutting head. Laser class 1 can also be achieved by installing side walls and a front door with a laser protection window (all available). The work area can be adjusted in height using an electrically controlled Z axis. The laser system is prepared for integration into a higher-level system, but can also be used as a stand-alone system. In the event of integration, interfaces for interlock, emergency stop, external laser control, etc. are available. Individual components of the system can also be integrated into a system at the customer's site. We are happy to support the customer after consultation and according to their specifications. Some technical data: - maximum 700 watts optical output power - wavelength: 1080 [nm] - power consumption (without cooler): < 3,000 watts - supply: single-phase; 230 VAC / 50 Hz - analog modulation (can be used to adjust power, among other things) - digital modulation up to 20 kHz

Condition: good (used), Year of construction: 2015, For Sale: Trotec Speedy 400 Laser Plotter – 80 Watt (Year 2015) Gsdpfx Asxfvkgsnxsit Working area: 1000 x 600 mm, with pass-through capability. The mechanical condition is good. The software and activation keys are included with the machine. The laser tube wear is consistent with the machine's age and usage.

Condition: ready for operation (used), Year of construction: 2023, OEM – laser marker (laser class 4) Gisdpfx Asn Atmvonxet Laser source is a 20 Watt fiberlaser with 1064 nm wavelength. The working area is 100 x 100 mm, up to 300 x 300 mm is available as an option. No external cooling is necessary. Input-voltage: 110...240 VAC / 50 Hz. Further applications are laser engraving and material ablation. The control software is installed on a PC, optionally also a Laptop can be used. The language of the software can be choosen (German, English). The laser is prepared for an integration into a ‘higher level system’. For this interfaces for Interlock, emergency stop, laser control etc. are available. We are happy to support the customer according to his requirements.

Condition: like new (used), Year of construction: 2022, OEM – laser marker / engraving laser (diode pumped YAG-laser) The laser beam source was used for some time to generate plasma as part of a scientific project. Overall, however, it only has few operation time. Due to the short pulse length, this laser is also very suitable as an engraving laser Laser source of the complete system is a 10 Watt diode-pumped YAG-laser with 1064 nm wavelength. The working area is 100 x 100 mm, up to 300 x 300 mm is available as an option. No external cooling is necessary. Input-voltage: 110...240 VAC / 50 Hz. Applications are laser engraving and material ablation. The control software is installed on a PC, optionally also a Laptop can be used. The language of the software can be choosen (German, English). Gsdpfx Aepyg N Aonxjit The laser is prepared for an integration into a ‘higher level system’, but can also be used as a 'stand alone' system. In this case interfaces for Interlock, emergency stop, laser control etc. are available. We are happy to support the customer according to his requirements.

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 355 mm, input voltage: 230 V, type of input current: AC, laser power: 6 W, type of cooling: air, total width: 920 mm, total height: 1,760 mm, total length: 940 mm, height adjustment type: electric, scan area length: 110 mm, scan area width: 110 mm, travel distance Z-axis: 500 mm, table length: 710 mm, table width: 400 mm, laser wavelength: 355 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 110 mm, Equipment: cabin, UV Fiber Laser 355 nm, 6 W – NEW, SK LASER KOLLTRONIC with Workstation, Made in Germany Laser Source IPG – Made in Germany Laser Safety Class 1 Workstation: - Combined sit/stand workstation with ergonomic legroom - Fully enclosed aluminum profile construction - Front door with laser protection glass for clear visibility - Bright workspace lighting - Dimensions: H 1760 × W 920 × D 940 mm - Work platform: Stainless steel plate with 25 mm hole grid (710 × 400 mm) - Rear service door, screwed for easy part loading - Motorized Z-axis: travel distance 500 mm (focus depending on lens) - Extraction nozzle DN50 (extraction optional) - Safety (PL4) - Emergency stop - Interlock with 2 standard relays - Safety relay for door monitoring UV Fiber Laser: - Wavelength: 355 nm - Power: 6 W 40 kHz - Pulse energy: 20 µJ - Pulse frequency: 10–300 kHz - Air cooled - Pilot laser red light + 2 distance lasers for focus adjustment (Laser class 2) - Laser head manually adjustable in Y-axis Scanner & Optics - F-Theta lens F = 160 mm, anti-reflective protective glass - Marking field: 110 × 110 mm Control: Gedpfx Aoyiz Dzonxoit - Windows 11 - 19" TFT monitor, keyboard, mouse - Interfaces: RS232 / Ethernet / USB - KOLLTRONIC marking software: text, logos, QR/Data Matrix, barcodes Operation: - 230 V / 50 Hz - 15–35 °C Condition: - New machine - CE compliant · Made in Germany

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: air, height adjustment type: electric, scan area length: 175 mm, scan area width: 175 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 350 mm, laser wavelength: 1,070 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 175 mm, Equipment: cabin, SK LASER KOLLTRONIC F20iW1 · IPG MOPA 20 W · XXL Workstation · X/Y/Z axis travel Laser Safety Class 1 · CE · Made in Germany System concept: Giodpfoyizvwsx Anxjt - New complete system with IPG MOPA 20 W fiber laser + XXL workstation for productive operation. The workstation features a - removable central worktable, with the floor area beneath freely accessible. XXL Workstation: - Seated/standing workstation with ample legroom - Aluminium housing - Bright work light, extraction nozzle DN50 - Side and front doors: left and right side, front door with slot - Doors monitored by sensors, safety equipment: emergency stop, interlock, safety relay Axis system – SK LASER X/Y/Z travel: - Gantry with 2 motorized Z-axes and rotary axis - X-axis 500 mm computer-controlled - Y-axis 2 × 500 mm computer-controlled - Z-axis 350 mm computer-controlled (travel path depends on installation) - 2 spindles per axis for increased stability - Axis controller - Made in Germany Laser – IPG MOPA fiber laser: - Output power: 20 W - Peak power: 1 mJ at 20 kHz - Pulse duration: 2-350 ns, MOPA (plastic-compatible) - Wavelength: 1060 – 1070 nm - Pulse frequency: 20–80 kHz - Beam quality M² < 1.6 - Air-cooled, power consumption < 400 W - Red pilot laser + 2 distance lasers (650 nm,

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, workpiece weight (max.): 300 kg, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: air, height adjustment type: electric, scan area length: 175 mm, scan area width: 175 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 350 mm, table length: 700 mm, table width: 500 mm, laser wavelength: 1,070 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, Equipment: cabin, New: SK LASER KOLLTRONIC F20iW1 – 20 W IPG fiber laser with automatic drawer system, Laser Class 1 System Concept - Complete system consisting of fiber laser + Workstation 1 with a drawer system for efficient loading and unloading. Godpfeyizr Sjx Anxeit - Automatic initiation of the laser job when the drawer is closed. At the end of the job, the laser head is automatically retracted in the Z-direction from the working area. Workstation & Drawer System: - Sitting/standing workstation with ample legroom - Aluminum housing - Bright work light, suction connection DN50 - Drawer system: 2 positions, max. load 300 kg (150 kg per side) - Drawer dimensions approx. H = 500 mm × W = 700 mm, motorized travel - Doors monitored by sensors, safety equipment: emergency stop, interlock, safety relay Axis System – SK LASER X, Y, Z travel: - X-axis 500 mm computer-controlled - Y-axis 2 × 500 mm computer-controlled - Z-axis 350 mm computer-controlled (travel distances depend on installation) - Two spindles per axis for increased stability - Axis controller - Made in Germany Laser – IPG fiber laser: - Diode-pumped ytterbium fiber laser - Output power: 20 W - Peak power: 1 mJ at 20 kHz - Pulse duration: 200 ns - Wavelength: 1060 – 1070 nm - Pulse frequency: 20–80 kHz - Beam quality M² < 1.6 - Air-cooled, power consumption < 400 W - Red pilot laser + 2 distance lasers (650 nm,

Condition: used, functionality: fully functional, Year of construction: 2018, This offer includes a complete industrial laser marking system from the TRUMPF TruMark series – comprising a TruMark 5000 laser source and a TruMark 5020 control/power supply unit. The TruMark series is known for precise, permanent, high-contrast marking on a wide variety of materials in industrial environments. Both devices are equipped with original TRUMPF type plates and are in well-maintained used condition. Technical Data TruMark 5020 – Control / Power Supply Unit Model: TruMark 5020 Mains connection: 100–240 V, 50/60 Hz Current consumption: 7 A Power: 600 W Protection rating: IP54 Serial number: L1150E2020 Year of manufacture: March 2018 Certification: CE, 21 CFR Chapter 1, Subchapter J TruMark 5000 – Laser Source Gjdpfjxxp Eqex Anxsit Model: TruMark 5000 Serial number: 0N510-2779-02 Wavelength: 1040–1200 nm Average output power (Po): ≤ 120 W Pulse power (Pp): ≤ 50 kW Pulse duration (t): ≥ 1 ns Frequency range (F): ≤ 1000 kHz Standard: IEC 60825-1:2014 (Laser Safety)

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, workpiece weight (max.): 350 kg, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: air, total width: 1,200 mm, total height: 1,800 mm, total length: 940 mm, working range: 175 mm, height adjustment type: electric, door opening width: 1,100 mm, door opening height: 700 mm, scan area length: 175 mm, scan area width: 175 mm, travel distance Z-axis: 400 mm, table length: 710 mm, table width: 400 mm, laser wavelength: 1,070 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 175 mm, Equipment: cabin, Laser Protection Class 1 · Made in Germany · NEW 12-month warranty System & Workstation: - Combined sit/stand workstation, aluminum housing - Fully glazed right-front door, safety glass LK 1 - Bright work light, suction nozzle DN50 - Standard size: H 1760 × W 920 × D 940 mm - Workstation XXL W 1200 × H 1800 × D 940 mm, sliding roof for crane loading, max. 350 kg - Manual sliding door, opening approx. 1100 × 700 mm - Safety equipment: emergency stop, two-channel interlock, Performance Level 4 - Motorized Z-axis, travel range 400 mm, focus dependent on lens Laser: - IPG Ytterbium fiber laser - Output power 20 W, pulse energy 1.0 mJ - Wavelength 1060–1070 nm, pulse duration 100 ns - Pulse frequency 20–80 kHz, air-cooled, power consumption < 400 W - Beam quality M² < 1.2 - Pilot laser + 2 distance lasers, Y-direction manually adjustable Scanner & Control: - F-Theta lens F = 254 mm, marking field 175 × 175 mm - Windows 11 Pro, SSD, 23" monitor, keyboard & mouse - Interfaces: RS232, Ethernet, USB - SK CONTROL software for texts, logos, QR/datamatrix codes, barcodes Gedpfx Anoyipxaoxoit Work Area & Safety: - Magnetic positioning on stainless steel platform 710 × 400 mm, hole grid 25 mm - Operating conditions: 230 V / 50 Hz, 15–35 °C

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, workpiece weight (max.): 150 kg, input voltage: 230 V, type of input current: AC, laser power: 50 W, type of cooling: air, working range: 175 mm, height adjustment type: electric, scan area length: 175 mm, scan area width: 175 mm, table height: 710 mm, table length: 710 mm, table width: 400 mm, laser wavelength: 1,070 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 110 mm, Equipment: cabin, IPG beam source – Laser class 1 · Made in Germany Workstation – Heavy-duty design: - Sit/stand workstation, aluminum housing, fully enclosed - Front door with laser safety glass, bright work lighting - Stainless steel work platform, 25 mm perforated grid (710 × 400 mm) - Manually movable drawer, precision rails, load capacity up to 150 kg - Extraction nozzle DN50, motorized Z-axis (travel distance 500 mm) - Interlock, emergency stop, safety relay Performance Level 4 Fiber Laser: - Diode-pumped ytterbium fiber laser, 50 W - Pulse energy: 1.0 mJ, pulse duration 100 ns - Wavelength: 1060–1070 nm, pulse frequency 20–200 kHz - Beam quality M² < 1.2 - Air-cooled, power consumption < 400 W - Pilot laser + 2 distance lasers (laser class 2) Scanner & Optics: - F-Theta lens F = 160 mm (marking field 110 × 110 mm) - Optional: F = 254 mm, adjustment range up to table height - X-Y galvo scanner for 1064 nm - Max. scan speed 4 m/s Control & Software: - Industrial PC, Windows 11 - Monitor, keyboard & mouse, monitor arm - KOLLTRONIC marking software: text, logos, QR/DataMatrix, barcodes - Matrix function for batch processing - Easy positioning, focusing, designing, working, coding Additional equipment: Gijdpfoyim S Isx Anxst - Rotary engraving unit for cylindrical parts up to Ø 60 mm - Controller & software upgrade included Operating conditions: - Power supply: 230 V / 50 Hz - Operating temperature: 15–35 °C Condition: - New machine - CE compliant - Made in Germany

Condition: excellent (used), Here we offer a laser marker. Product features: Class 4 CO2 laser Micro-marking Wavelength: 10.6 microm 0.417 mil Laser power continuous wave: approx. 30 W Weight marking head: 20kg Weight control unit: 12kg Marking field size with process area cover : 0-55 mm or 0 - 2.2 inch Permitted ambient temperature: 0 - 40 degrees Celsius Permissible humidity : 35% - 85% 100 V AC: 1,000 VA or less 200 V AC: 1,200 VA or less Air-cooled Printing options: letters, numbers, katakana, hiragana, kanji,symbols,up to 50 self entered characters, QR Code, Micro QR Code, Data Matrix, GS1 Data Matrix and Bar Codes Type: LP-431U-C condition: used / used Scope of delivery: (see picture) Giedpfx Asffmxnsnxot (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: excellent (used), Here we offer a laser marker. Product features: Class 4 CO2 laser Micro-marking Wavelength: 10.6 microm 0.417 mil Laser power continuous wave: approx. 30 W Speed: 240 m/min or less Weight marking head: 20kg Weight control unit: 12kg Marking field size with process area cover : 0-55 mm or 0 - 2.2 inch Permitted ambient temperature: 0 - 40 degrees Celsius Permissible humidity : 35% - 85% Requires 90V to 132VAC, 180V to 264VAC, 50/60Hz Air-cooled Printing options: letters, numbers, katakana, Gedpfx Aneffttrexeit hiragana, kanji,symbols,up to 50 self entered characters, QR Code, Micro QR Code, Data Matrix, GS1 Data Matrix and Bar Codes Type: LP-431-C condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: good (used), Trumpf Vectormark Type: VMc2 Trumpf Vectormark laser marker with Fuchs extraction and filter devices Trumpf Vectormark GREEN 532nm Trumpf VMc2 Laser marker, with frequency-doubled diode-pumped Nd:Yag laser with Hurryscan 10 - Galvo head from Scanlab Fuchs extraction and filter devices TKFD The integrated pre-separator ensures the high filter capacity Different filter levels are possible and can be perfectly customized Ideal for confined spaces - can be placed under a table or integrated into machines Gijdpfx Anociz Iysxot Welding fume separation class W3, IFA certified TKFD can also be transported in the trunk without modification Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you a 3DMICROMAC laser marking system microCUT Enclosure Laser source IPG Raylaighs-3 axis scan system Power sensor 1 Power sensor 2 Camera system for positioning Camera system for quality inspection Cooler Suction Control cabinet with IPCs Distributor Cooling media Machine dimensions: Machine weight: 2 tones width 922 mm, depth 4653 mm, height 2925 mm Components: Suction: height 2869 mm, width 760 mm, depth 1577 mm cooler: height 1697 mm, width 1440 mm, depth 860 mm Weight (without filling) 500kg Laser rack: height 1786 mm, width 856 mm, depth 806 mm Weight 500kg Switch cabinet: height 2001 mm, width 1616.05 mm, depth 605 mm Machine connections: Electrical: mains voltage 3*400 VAC/N/PE Mains power consumption 74A Frequency 50/60Hz Power consumption 51,3kW Control voltage 24/5VDC Main fuse NH 100A gG Mudule: Laser source: mains voltage 400 VAC Frequency 50/60Hz, power 16.7 kW, current consumption 59A Cooler: mains voltage 400V, frequency 50/60Hz, current consumption 40A Machine: Consumables Working pressure 6-10 bar Temperature 10-50°C Quality ISO 8573-1 Solid state: Class 1 Godpfxofgbt Ee Anxjit Oil. Class 1 Water: Class 4 Residual oil content ᐸ 10µg/m³ Water content ᐸ 6 g/m³ Pressure dew point 3 °C Consumption ᐸ 120 l/min Cooling water cooling unit modules: Temperature cooling water outlet 21°C Temperature cooling water return 26°C Setpoint tolerance 1K Cooling water flow 69l/min Free pump pressure 1.5 bar DI water cooling unit Temperature cooling water outlet 26°C Temperature cooling water return 31°C Setpoint tolerance 1K Kühlwa [...]

Condition: excellent (used), Laser system with Laserline diode laser and Lascon controller Here we offer a Lascon laser system with Lascon Controller LPC03. Laserline diode laser The diode laser 'LDM 500-60 ' has a wavelength of of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 wavelength of 935 nanometers +-10% Laser power: 550 W Mains voltage 100-264V +- 10% Max.power input 1,7 kw Frequency 1 phase 47-63 Hz Type: LDM 500-60 Lascon Controller LPC03 The LPC03 has the power of a complete PC in a very small space. Instead of a hard disk a removable flash disk was installed. Due to the omission of the hard disk and the extremely low heat development, the LPC03 is therefore ideally suited for tasks in the field of for tasks in the field of measurement and control in industrial environments. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also offers space for the PCI card PCI-1P. In conjunction with the LASCON measurement and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half size CPU card Giodpfxodux Duj Anxjt Slots: 1 x PCI, length max. 180mm Drives: none Storage medium: exchangeable flash disk Connectors: USB front; Ethernet,RS232, VGA, keypad, mouse,USB rear. Housing: 212mm X 80mm X 250mm ( height X width X depth ) Protection class:Front: IP40 Environment: 15°C - 40°C Ty

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,064 mm, workpiece weight (max.): 250 kg, input voltage: 230 V, type of input current: AC, laser power: 20 W, total height: 2,700 mm, working range: 175 mm, height adjustment type: mechanical, scan area length: 175 mm, scan area width: 175 mm, table length: 1,200 mm, table width: 1,200 mm, space requirement height: 2,700 mm, laser wavelength: 1,064 nm, working height: 500 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 175 mm, Equipment: cabin, IPG Fiber Laser Type M · Laser Class 1 · Made in Germany XXL Workstation – Custom Construction: - Standing workstation with table height designed for standing operation Gedpsyimz Aofx Anxsit - Folding sliding door, right side fully glazed with safety glass, class LK 1 - Bright work light - Stainless steel suction nozzle DN50 - Heavy-duty drawer system: up to 250 kg, internal dimensions 1.2 × 1.2 m - External position: for loading/unloading - Internal position: for laser operation - Programmable auto-start, magnetic switch as interlock - Slots on both sides for extra-long parts, beam protection brush - Roof height for parts up to 500 mm under 254 mm lens - Z-axis manual, base value storable - Machine external height: approx. 2.50 – 2.70 m Laser – IPG MOPA: - Diode-pumped ytterbium fiber laser - Power: 20 W - Pulse duration adjustable (also for plastics) - Wavelength: 1064 nm - Pilot laser + 2 distance lasers (650 nm,

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: air, total width: 920 mm, total height: 940 mm, total length: 1,760 mm, door opening width: 670 mm, door opening height: 500 mm, scan area length: 175 mm, scan area width: 175 mm, travel distance Z-axis: 400 mm, table height: 710 mm, table length: 710 mm, table width: 400 mm, space requirement width: 920 mm, space requirement height: 940 mm, laser wavelength: 1,070 nm, space requirement length: 1,760 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 175 mm, Equipment: cabin, Fiber Laser System for Professional Marking and Engraving of Metals and Plastics. Equipped with SK-LASER Workstation, Laser Class 1, and automatic lifting door. Laser Class 1 · CE · Made in Germany System & Lifting Door: - Complete system: IPG fiber laser + workstation + electric lifting door Process Sequence: - Start → Door closes → Laser process → Door opens automatically - Door opening approx. H 500 × W 670 mm - Access protection via safety control Laser – IPG (Made in Germany): - Power: 20 W - Pulse energy: 1.0 mJ - Pulse duration: 100 ns Gsdpfeyimpaox Anxoit - Frequency: 20–80 kHz - Wavelength: 1060–1070 nm - Beam quality M² < 1.2 - Air-cooled, < 400 W Optics & Scanner: - F-Theta lens f = 254 mm - Marking field 175 × 175 mm - Pilot laser + 2 distance lasers - Manually adjustable laser head (Y-axis) Control: - Windows 11 Pro, SSD, 23" monitor - Interfaces: Ethernet / USB / RS232 - SK CONTROL: texts, logos, QR codes, variable data, parameter management Workstation 1 – Laser Class 1: - Seated/standing workstation, aluminum housing - Work surface 710 × 400 mm, 25 mm hole grid - Dimensions 1760 × 920 × 940 mm Motorized Z-Axis (400 mm) - Extraction port DN50 - Safety (PL4) - Emergency stop - 2-channel interlock Safety relay - Rear service door (when open: Laser Class 4) Operation: 230 V / 50 Hz 15–35 °C Condition: - New machine - CE · Made in Germany

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, workpiece weight (max.): 25 kg, input voltage: 230 V, type of input current: AC, laser power: 50 W, type of cooling: air, total width: 1,400 mm, total height: 2,000 mm, total length: 1,500 mm, working range: 280 mm, height adjustment type: electric, scan area length: 280 mm, scan area width: 280 mm, travel distance X-axis: 600 mm, travel distance Z-axis: 400 mm, table length: 1,000 mm, table width: 1,000 mm, space requirement width: 1,400 mm, space requirement height: 2,000 mm, laser wavelength: 1,070 nm, space requirement length: 1,500 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 280 mm, Equipment: cabin, Automated Fiber Laser System with SK-LASER Workstation and Rotary Table for Series Production. Laser Class 1 · CE · Made in Germany Gedpfx Aeyil Dvjnxsit System: - Complete system: fiber laser + workstation + rotary table - 2 processing positions with partition wall (400 mm) - Operator protection via light curtain - 2-cycle operation, 180° rotation Equipment: - Workstation XXL: W 1,400 × H 2,000 × D 1,500 mm - Option: High-speed scan head Superscan Rotary Table & Axes: - Rotary table Ø 1,000 mm, 25 mm hole grid - Automatic production cycle - 2 × Z-axis 400 mm, 1 × X-axis 600 mm - Ball screw drive, load capacity up to 25 kg Laser – IPG: - 50 W, 1.0 mJ - 50–250 kHz, 100 ns - 1060–1070 nm, M² < 1.2 - Air-cooled, < 400 W Optics: - F-Theta f = 420 mm - Field approx. 280 × 280 mm - Pilot laser + distance laser Control System: - Windows 11 Pro, SSD, 23" monitor - Ethernet / USB / RS232 - SK CONTROL: texts, logos, QR/DM, serial numbers, material parameters Workstation: - Seated/standing workstation - Extraction nozzle DN50 - Emergency stop, dual-channel interlock, safety relay Operation: - 230 V / 50 Hz - 15–35 °C Condition: - New machine - CE-compliant · Made in Germany

Condition: used, Year of construction: 1994, x-travel 0 mm y-travel 0 mm z-travel mm total power requirement kW weight of the machine ca. t Godst Hw Dqjpfx Anxoit dimensions of the machine ca. m Marking machine for cylindrical parts, rotary table, 4 axes, PV 70 Head

Condition: good (used), Year of construction: 2020, Epilog Cameo Zing 24 Co2 Laser with UML 340 extraction Year of acquisition: 2020 (year of manufacture: 2019/2020) Including rotary engraving device and compressor Laser power: 30 watts Max. working area: 610×305 mm Max. working height: 191 mm Laser safety class: 2 Resolution: 1,000 dpi Frequency: 10–5,000 pulses/inch Interfaces: 10 Base T-LAN, USB No additional software included. Giedpfx Asyh Rhksnxjt #8480

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: JEWELliner "XS" PRO Modell "Premium", type of input current: AC, laser power: 30 W, total width: 400 mm, total height: 500 mm, total length: 600 mm, overall weight: 55 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 400 mm, door opening height: 200 mm, laser wavelength: 1,064 nm, Developed, produced and checked in Germany. JEWELliner "XS-PRO" model series "Premium" with 30W CW laser power include camera - electric lift door - auto-focus - compact machine dimension - Developed and produced in Germany - Other models, laser power and options on request. Engraving Laser (fiber technology) with security housing „LASER CLASS 1“. Compact designed, all components are in the housing and will be air cooled. Maintenance free! Materials: metals, ceramic and some plastics. Applications can found in the jewellery ans also in other production areas. machine dimension: L60xW40H50cm, to integrade simple into a production area. Samples of material: steel, stainless steel, gold, silver, titan, aluminium, brass, copper, brounce, carbon, ceramic, makrolon Possibilities of application: - graphic engraving (logo, draw, handdraws, signatures) - serial numbers - barcode, datamatrix, QR-code - ring inside (f.e. name, date, symbol, handwrite) optional - ring outside (f.e. name, endless graphic, endless pattern) optional - bangles inside/outside - optional - text (text straight, circled text, bowed text, text symbols) - handwrite - finger print - photo engraving (photos, pictures) - micro engraving (micro text till 0.25mm character high) - round engraving (engraving on round or bowed surfaces) optional main parts of JEWELliner "XS" PRO Modell "Premium" : - fiber laser unit with scan head and focus pointer - security housing „Laser Class 1“ with 200x140mm security glass - manual door opening - emergency button - 180° view area to the marking field - electrical z-axis for focus positioning - rotary axis with removable jewelry jaw chuck - configured engraving software - high resolution industrial camera USB 3.1 Specification: - laser technology: fiber laser - outputpower CW: 30W - available frequency: 1.8 - 2000kHz - connection type data: USB 2.0 - wave length: 1064nm - lens (delivery): F-Theta 163 - marking field size: 110 x 110 mm – smaller possible - focus range: ca. 1.7 mm - min character high: 0.25 mm - min. line width: 0.023 mm - cooling: air cooled - maintenance: no service necessary - power: AC 110V / 240V – 50/60Hz – short cut save - dimension: L600 x W400 x H500 mm - weight: 55kg Giedpfx Asppxmkonxet The engraving laser is after the delivery immediately ready to use. In this way, the machine can be integrated in the production very fast. The machines can be inspected and tested by appointment. Pictures can be different!

Condition: new, Year of construction: 2024, machine/vehicle number: BN20XS "Standard", shaft length: 1,064 mm, workpiece weight (max.): 5 kg, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: air, total width: 400 mm, total height: 500 mm, total length: 600 mm, working range: 70 mm, overall weight: 30 kg, warranty duration: 12 months, height adjustment type: electric, sheet thickness aluminum (max.): 3 mm, door opening width: 400 mm, door opening height: 350 mm, travel distance Z-axis: 100 mm, JEWELliner "XS2" model series "Standard" with 20W CW laser power. - Developed and produced in Germany - Other models, laser power and options on request. Engraving Laser (fiber technology) with security housing „LASER CLASS 1“. Gedpsppxlmjfx Anxjit Compact designed, all components are in the housing and will be air cooled. Maintenance free! Materials: metals, ceramic and some plastics. Applications can found in the jewellery ans also in other production areas. machine dimension: L50xW40H50cm, to integrade simple into a production area. Samples of material: steel, stainless steel, gold, silver, titan, aluminium, brass, copper, brounce, carbon, ceramic, makrolon Possibilities of application: - graphic engraving (logo, draw, handdraws, signatures) - serial numbers - barcode, datamatrix, QR-code - optional ring inside (f.e. name, date, symbol, handwrite) optional - optional ring outside (f.e. name, endless graphic, endless pattern) optional - optional bangles inside/outside - optional - text (text straight, circled text, bowed text, text symbols) - handwrite - finger print - photo engraving (photos, pictures) - micro engraving (micro text till 0.15mm character high) - round engraving (engraving on round or bowed surfaces) optional main parts of JEWELliner "XS2" ( BN20XS2-HR ) : - fiber laser unit with scan head and focus pointer - security housing „Laser Class 1“ with 100x140mm security glass - manual door opening - emergency button - 180° view area to the marking field - electrical z-axis for focus positioning - configured engraving software - rotation axis Specification: - laser technology: fiber laser - outputpower CW: 20W - connection type data: USB 2.0 - wave length: 1064nm - lens (delivery): F-Theta 163 - marking field size: 70 x 70 mm – smaller possible - focus range: ca. 1.0 mm - min character high: 0.15 mm - min. line width: 0.020 mm - cooling: air cooled - maintenance: no service necessary - power: AC 110V / 240V – 50/60Hz – short cut save - dimension: L500 x W400 x H500 mm - weight: 38kg The engraving laser is after the delivery immediately ready to use. In this way, the machine can be integrated in the production very fast. The machines can be inspected and tested by appointment. Pictures can be different!

Condition: new, Year of construction: 2025, 2D / 3D FIBER LASER MARKING MACHINE skylaser Mark - 2D 3D optional fiber laser engraving / marking laser is the complete solution for your complex laser engraving - Applications Our systems are used skylaser Mark exactly where the conventional CO2 laser technology has its limits. By means of the fiber laser with a wavelength of 1064 nm can also be realized delicate structures in almost any material. In contrast to conventional milling process, the laser operates without contact, without force and without tool wear. Benefits in your application is the geometric flexibility and high machining accuracy. Regardless of the hardness of the workpiece to be machined, this type of processing to be applied. With the work table adjustable to your needs and increases the flexibility of the mobile system. You can easily integrate the system into your production line, or operate as a stand-alone solution. Our Mark skylaser provide very precise and permanent markers (laser engraved) and the laser application area metal and certain organic substances suitable for the special. Gjdpfx Ajbnpd Nenxjit The use of a variety of fonts, apply bar codes, serial numbers, logos, and images is easily possible. Thanks to the excellent resolution almost all requirements of marking tasks can be solved. Manufacture of stamping dies, engraving, labels and more complex, fine structures, the software is extremely user friendly. Even very complex and elaborate marking tasks can be easily supplied to the industrial PC to easily create. The exact positioning is done in no time, thanks to the Optional camera for process monitoring and tracking software-based workpiece alignment. 2D / 3D FIBER LASER MARKING MACHINE skylaser Mark - 2D 3D optional fiber laser engraving / marking laser is the complete solution for your complex laser engraving - Applications Our systems are used skylaser Mark exactly where the conventional CO2 laser technology has its limits. By means of the fiber laser with a wavelength of 1064 nm can also be realized delicate structures in almost any material. In contrast to conventional milling process, the laser operates without contact, without force and without tool wear. Benefits in your application is the geometric flexibility and high machining accuracy. Regardless of the hardness of the workpiece to be machined, this type of processing to be applied. With the work table adjustable to your needs and increases the flexibility of the mobile system. You can easily integrate the system into your production line, or operate as a stand-alone solution. Our Mark skylaser provide very precise and permanent markers (laser engraved) and the laser application area metal and certain organic substances suitable for the special. The use of a variety of fonts, apply bar codes, serial numbers, logos, and images is easily possible. Thanks to the excellent resolution almost all requirements of marking tasks can be solved. Manufacture of stamping dies, engraving, labels and more complex, fine structures, the software is extremely user friendly. Even very complex and elaborate marking tasks can be easily supplied to the industrial PC to easily create. The exact positioning is done in no time, thanks to the Optional camera for process monitoring and tracking software-based workpiece alignment. Views housing patterns: We adapt "us" and your machine to your tasks!

Condition: new, Year of construction: 2025, The laser processing center skyCUBE M - the new standard in laser material processing! PFEIFER laser processing center skyCube M Laser machine with 200W CO2 laser available immediately Mclass = machining area X 1250 x Y 650 x Z 300 mm skyCUBE M laser processing center - the new Mclass multifunctional laser engraving machine and laser cutting machine - laser processing simple - high precision - laser engraving, cutting with high speed and quality. Our new and best multifunctional talent not only impresses the most experienced user with its newly thought-out design. This CO2 laser / fiber laser shows its outstanding capabilities as a CO2 or fiber engraving laser as well as a CO2 or fiber cutting laser in all industrial applications. With an optional laser power of up to 1000W (1kW), the CO2 laser device / fiber laser system can also be used extremely flexibly in your production. Gedpfe Sfansx Anxjit skyCUBE laser devices meet all the requirements of class 1 according to DIN EN 60825-1 and thus offer you the highest level of safety. Depending on the selected and installed laser power, this CO2 laser / fiber laser is ideally suited for cutting and engraving many materials, such as: various metals, acrylic glass, solid wood, etc. Wood materials, wood composite materials, paper, cardboard, various plastics and Foams, textiles, and much more. The excellent execution of the laser machine 100% produced in Plauen guarantees the laser user from metal construction to the laser source a high level of work accuracy with consistently high quality. With a cutting speed of up to 8000 mm / s and an engraving speed of up to 4000 mm / s, high-quality laser technology produces clean and very sharp cutting edges and precise laser engravings. The ergonomic design with a pull-out work table makes it easier to load the system. A drawer in the lower part of the machine is used to collect the clippings. User-friendly and intuitive - the supplied skyCUBE PC software (ready for Windows®). A simple, practical user interface adapted to the Windows standard lets you work quickly and effectively. The software is characterized by high system stability, professional monitoring with appropriate machine operation and control as well as compatibility with common file formats. The data is output over levels - separately for each level, including the definition of the sequences and the type of processing. The parameters, such as laser power and processing speed, are automatically saved for each level and can thus be reproduced in a material database at any time. The laser projects are transferred to the skyCUBE M laser processing center with a computer connected via LAN / USB interface. From there these can be processed repeatedly without the PC having to be switched on. A modern touch control panel gives you access to all system information and functions. The skyCUBE M laser processing center at a glance: German industrial standard machine steel construction for the safe and vibration-free mounting of the laser components and axis systems, on rollable industrial leveling feet 8 "touchscreen display simply see more, control more, communicate more with the skyCUBE M laser processing center Redundant safety system - class 1 laser Security: Shutter - ᐳ active mechanical beam path closure