Condition: new, Year of construction: 2013, 4.Measurements: 1. Pre-modification; the present flatness accuracy of the substrate supporting surface and the linearity of the rubbing roll to the supporting surface are measured to determine the actual status 1.1.1. Measurement performed with and without a (largest) substrate 1.1.2. Measurement performed under process / ambient conditions 2. Post modification; the modified flatness accuracy of the substrate supporting surface and the linearity of the rubbing roll to the supporting surface are measured to determine the improved status 2.1.1. Measurement performed with and without a (largest) substrate 5. Ambient conditions: 1. Temperature: 20 ± 5oC 2. Humidity: 50 ± 25%RH 6.Acceptance: 1. Approval of design drawings by customer before supplier starts manufacturing 1.1. The design approval will not free the supplier of his obligations to fulfill all parts of the deliverable 2. Site Acceptance Test (SAT) 2.1.Complete modification delivered / installed / pre-tested 2.2.Delivery of documentation (technical drawings of modified parts) 2.3.Acceptance tests 2.3.1. Accuracy measurements post modification with and without the largest (glass) substrate 2.3.2. Demonstration functionality on substrate sizes; 2.3.2.1. 10pcs. 300x300x4.0mm 2.3.2.2. 10pcs. 800x800x4.0mm Cgjln Eowam N Ssdryjt 2.3.2.3. 10pcs. 1,200 x 1,500 x 4.0mm 2.3.2.4. 10pcs. substrate variations such as 2.0mm and/or tempered

Condition: new, Year of construction: 2023, Functionality: fully functional, machine/vehicle number: EcoPurge30, pneumatic purging pump for 2K-metering pump max. flow: 6l/min max. pressure: 21MPa Cgjlnspz H Hqj Edryst pressure ratio: 30:1

Condition: used, Year of construction: 2002, Functionality: fully functional, machine/vehicle number: GG501A-8491, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Cutting table for laminated glass. Optional a float table can be offered to create a combination line Cjlowalknen Edrysgt

Condition: good (used), Year of construction: 2007, Functionality: fully functional, input voltage: 400 V, type of input current: AC, Lisec gas filling press for maximum unit sizes of 3500 x 2500 mm, year 2007, consisting of: RSVN-35/25, frame set section, year 2007 RTVB-15/25ST, extension conveyor for measuring section, year 2007 RTVB-15/25MZU2, measuring section for gas filling press, year 2007 FPS-35/25U2, gas filling press for Argon, year 2007 RTVB-15/25ST, press outlet conveyor, year 2007 UKL-35/25, tilt table, year 2007 Cgjlnowca Hpe Edryst

Condition: good (used), Year of construction: 2001, Angular interlinked double-sided grinder with washing machine and automatic dryer Grinding and polishing function, A total of 40 spindle motors, Connected load: 160 kW / 400 V / 50 Hz, Rated current: 265 A, Max. Glass size: 3500 x 1800 mm, Min. glass size: 350 x 200 mm, Csln Eorci Uxjdrysgt Glass thickness: 4 to 10 mm.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 200 h, Functionality: fully functional, machine/vehicle number: 105, total length: 6,000 mm, Grinded machine with one grinding disc and one polishing disc for general use. Cgjlsrumv Aon Edryjt

Condition: used, Year of construction: 2021, Functionality: fully functional, Glass cutting line 3210x2550. Cgslnev I S Nbe Edryst 1 Loading with tilting feeder. 2 Cutting bridge 3700mm long. 3 Base table with unloading. The table is still in use. OPTIMA software. Can be viewed in Warsaw.

Condition: good (used), Year of construction: 2009, operating hours: 14,000 h, Functionality: fully functional, 3 axes CNC working center for glass and ceramic with new electro spindle from 2021 with 2000 hours max. glass sizes : 3250 x 1620 mm max. sheet thikness for peripheral wheel : 115 mm electrospindle power : 15 Kw Cgsln Edjvkd Dperyjt speed electrospindle : 12000 rpm rotating tool store with 14 positions extra rotating tool store with 8 positions on heads board total power : 15 Kw total weight : 6450 kg Working video on demand

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, Zaffeani 1300mm vertical glass washer and dryer. Working direction: Left-Right Max washable glass height: 1300mm, open top, glass can be rotated Washable glass thickness: 3-12mm Number of brushes: 4 (not for Low-e glass!) Drying fan Stainless steel cabin Backlighting Stop sensor Cgjlev Nqgzsn Edryst The machine has been completely inspected, cleaned and can be viewed in perfect working condition at our location!

Condition: good (used), Year of construction: 2003, Functionality: fully functional, total width: 10,000 mm, total length: 25,450 mm, total height: 1,450 mm, input voltage: 415 V, input frequency: 50 Hz, compressed air connection: 6 bar, cutting length (max.): 3,700 mm, Lisec cutting line including cutting bridge for laminated glass for max. glass sheets of 3700 mm x 2600 mm (max. cutting width 3300 mm on cutting bridge for laminated glass), year 2003, consisting of: - ATH-37/26D, double sided moveable loading station with 3 stations and 5 glass racks - ESL-37/26RS, cutting table with low-e ginding function (can do cutting and grinding at the same time) - VB-33, cutting bridge for laminated glass - BTH, braking table - safety fences This cutting line is still in operation and can be seen on appointment at the current location in Great Britain. Availabiblity of machines: April 2025 Cjln Edrsv Smugsyogt

Year of construction: 2008, operating hours: 200 h, Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 2008 160 MA, This machine is suitable for extruding suitable ceramic, pasty masses using suitable tools. Cgeln Edovyfzujryot Further information on the system structure and technical data can be found in the extract from the operating instructions.

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, input voltage: 400 V, power: 30 kW (40.79 HP), frequency: 50 Hz, Alpa/Egar/250 CNC machining centre in very good condition. Machine was recently serviced by Bavelloni service and is in very good working condition. There is a new PC with the latest CAD/CAM software. The machine is available immediately. Cgoln Edjv T Tkqjryjt

Condition: new, Knopp Duplokant S2 Condition New/ Refurbished 400V connection Double-sided glass grinding machine. 4 meter roller table can be folded up to 5 meters. Table extension to the front also available. Ball rollers are currently not available (from 01.07.2024) again and will of course be added. Machine is in absolutely new condition Celn Eotzcqxedryegt

Condition: excellent (used), Year of construction: 2016, 5 axes CNC glass working center for max. glass sizes 4050 x 2300 mm machine fro grinding , milling , drilling , bevelling 0-90° , engraving and sawing max. thikness peripheral wheel : 80 mm electro spindle : 15 Kw electro spindle spindle speed : 12000 rpm 2 x 14 positions rotating tool change store left + right + 8 postions tool change on heads board ( next to the electro spindle ) tool rack iso 40 weight : 7500 Kg Coln Esv U Abzedryjgt

Condition: used, Year of construction: 2007, 26 Kw 8 bar 400 V - 50 Hz 3-55 mm 4600 kg 0.3-5 m/min spindles 13 3 - 35/ 55 mm Cgjljtwn Dken Edryjt Min. glass 35 x 150 mm Max. glass weight 2000 kg

Condition: excellent (used), Year of construction: 2013, Functionality: fully functional, total length: 21,200 mm, total width: 5,500 mm, total height: 3,500 mm, working height: 500 mm, input voltage: 415 V, type of input current: AC, Lisec edge grinding line, right/left, year 2013, consising of: RTVB-15/20, inlet conveyor 1 of edge grinding machine KSR RTVB-15/20, inlet conveyor 2 of edge grinding machine KSR RTVB-15/20, inlet conveyor 3 of edge grinding machine KSR KSR-21, automatic edge grinding machine RTVB-15/20, outlet conveyor 1 of edge grinding machine KSR RTVB-15/20, inlet conveyor 1 of edge grinding machine KSV WTL-20, glass washing and drying machine with 6 brushes for low-e RTVB-11/20, outlet conveyor 1 of washing machine RTVB-27/20, outlet conveyor 2 of washing machine Technical data: weight: 3500 kg min. glass length: 350 mm min. glass height: 180 mm min. glass thickness: 2,3 mm max. processing length: 3500 mm max. processing height: 2100 mm max. processing width: 19 mm Cgslev Skihen Edryjt load: 150 kg/m equivalent continuous sound pressure level: max. 78 dB electrical connection: 3/N/PE-50Hz 415V, 12KVA compressed air supply: 6 bar air consumption: 200 l/min The machine is still in operation and can be seen at the current location in Great Britain on appointment. Availability of machine: April 2025

Condition: used, Year of construction: 2016, 8 spindle system. Connected loads: 380/400 V, 19 kW. Coln Eev Rbtuodryjgt Glass thickness: 3 - 25 mm. The system produces a beautiful glass finish. Condition: in very good condition.

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, total length: 20,800 mm, total width: 9,500 mm, total height: 2,000 mm, year of last overhaul: 2024, Maximum glass processing size 2000 x 3000 mm Colotvmkfjn Edryjgt

Condition: new, Year of construction: 2025, Functionality: fully functional, total length: 4,440 mm, total width: 1,487 mm, total height: 2,793 mm, input voltage: 400 V, overall weight: 1,900 kg, input current: 16 A, Equipment: documentation/manual, Technical data Length - 4440 mm Height - 2793 mm Width - 1487 mm Weight - 1900 kg Maximum distance of drilling center to bottom of the glass - 1000 mm Glass thickness - 2 to 20 mm Communication - touchscreen 7” and analogue buttons Spindle feed (motion) - automatic Spindle feed steering - electronic (not pneumatic) Setting of loading bar height - electronic Spindle rotation speed - 700 RPM do 2800 RPM Measurement of the drill position - automatic Drills changing mode - lowering of the white top and blocking spindle rotation Setting of the drilling depth - electronic (calculated by a controller) Horizontal positioning - two row of bumpers with measure (manual) Glass clamping system - pneumatical Hole chamfering mode - installed, electronically driven Automatic glass thickness - installed, electronically Cgoln Edeh Ek H Seryot Measuring Automatic drill bit diameter - installed, electronically Measuring Drilling in series - installed

Condition: refurbished (used), Year of construction: 2001, Functionality: fully functional, Pystymallinen suoran reunan hiomakone lasille Shiatti FPS Series 50, Pituus 9030 , korkeus muokattavissa max 3360 paino 3800 kg Lasin koko min. 100 x 100 max 3000 x 3000 , lasin vahvuus 3-50 mm , timanttilaikat 3 kpl viistetimantit 2 kpl ,viistekiillotuslaikat 2 kpl Cgjln Edrsv Idpgoyot kiillotuslaikka 2 kpl , ceriumoksidilaikat 2 kpl viiste ja 1 kpl pohja,. hiontamoottorit uusittu .

Condition: excellent (used), Year of construction: 2012, Functionality: fully functional, working height: 2,700 mm, Glaston-Bystronic 2700 mm Gas press ZPG 2700 x 3500 VR SP 1 AS 15-60mm 1000kg cy 2012 Cgelsvuhflsn Edryst

Condition: good (used), Year of construction: 2008, Functionality: fully functional, total length: 27,600 mm, total width: 4,000 mm, total height: 2,700 mm, working height: 500 mm, input voltage: 415 V, type of input current: AC, space requirement width: 6,000 mm, space requirement length: 31,000 mm, space requirement height: 3,000 mm, power: 86 kW (116.93 HP), Bystronic IG line including gas filling press and sealing robot, running diresction left to right, year 2008/2010/2003, including option for triple units, consisting of: - TB1.V.GW. inlet conveyor washing machine, stainless steel type, year 2008 (2530 mm) - GW-D washing machine with 6 brushes for low-e, year 2008 (2290 mm) - TB1.N.GW outlet conveyor of washing machine, air cushion type year 2008 (1455 mm) - TB1.V.VR inlet conveyor of frame set, air cushion type, year 2008 (1455 mm) - VR frame set with integrated overhead frame conveyor, year 2008 (2935 mm) - TB1.V.ZP inlet conveyor of gas filling press, air cushion, year 2008 (2510 mm) - ZP.GAS assembling and gas filling section, year 2010 (2700 mm) - TB1.N. ZP outlet conveyor of gas filling press, air cushion type, year 2008 (2510 mm) - VA sealing robot, running on PU, with 2 x 200 liter base drum and 200 liter catalyst drum, year 2003 Celn Edev R Tudsrysgt Technical Specification: maximum unit size: 3000 x 1600 mm minimum unit size: 350 x 190 mm unit thickness: 12-50 mm glass thickness: 3-15 mm inset: 1-6 mm line design: for double and triple units voltage supply: 3-phase 415V 50Hz control volage: 24VDC air supply: 6,5 bar working height: 500 mm inclination: 6 degree The line is in good condition and can still see in operation on site. Sold as it is, EXW GB, dismantled and loaded to truck

Year of construction: 2009, Condition: like new (used), Functionality: fully functional, Still in CLEANROOM at the moment!!! with S!MPATI software with vacuum connection Vötsch Drying Cabinet VTLF 160/150/110. Max temp 190°C. Drying format 1000x1400 mm. Stainless steel equipment. Filter H13. Function The VTLF cleanroom dryer for coating materials is designed and constructed according to EN 1539. Cjln Eev T I I Rjdryogt After the load has been placed in the dryer and the doors are closed, the circulating air flows around the load in the dryer's usable space. The turbulent flow ensures good and spatially uniform heat transfer to the load. Technical Specifications Interior (usable space) m3 2.78 Internal dimensions Width Height Depth mm 1600 1500 1100 Weight (net) kg approx. 1400 Recirculation fan speed Min. setting range Max. setting range % 50 120 Minimum exhaust air flow rate (extraction mode) Reduced exhaust air flow rate (recirculation mode) m3/h 360 90 Flushing time 5 air changes per second 300 Total steam volume m3 4.5

Condition: like new (used), Year of construction: 2020, Functionality: fully functional, Dual Chamber During Oven 1,700 x 1,400mm (2,40m2) Process area based on largest substrate; 4.1. Process area (minimal); 1,700 x 1,400mm (2,40m2) 4.2. Substrates are (non-) heat treated, (non-) TCO coated optical white (or standard) float glass sheets with straight or pencil edges and (non-) edge delete patterns (1) 4.3. Substrates are rectangular shaped (2) general Electrical diagram (see appendix 1) Main power supply voltage 3x400 ± 5% + earth, 50Hz ± 5% Control voltage 230Vac 50Hz and 24Vdc Cgeljv T I Iqen Edryst Main fuse 140A Engine power Circulation fan motor 2.2 kW (2 pcs.) Drive motor vertical transport 0.39 kW Drive motor horizontal transport 0.09kW 1.5.3 Heating system Heating Heating type Electric with closed tube elements Power 30 kW per room Overall, the system consists of two parts, viz: - The furnace consists of two chambers each with an air circulation fan and adjustable air inlet. - The conveying system consists of a trolley with vertical and horizontal movement. The oven is suitable for curing heat treatments under air atmosphere with cleanroom classification in the temperature range from 50ºC to 250ºC. One heat cycle per chamber can be programmed. The cart can place glass from the conveyer position into one of the two chambers where the products undergo a selected heat cycle. And then removed from the oven and placed back in the conveyor position.

Condition: like new (used), Year of construction: 2020, Functionality: fully functional, Mobile inspection station Cgjlnjv T I Hte Edryst Light walls available