Used Bankruptcy for sale (7)

Condition: good (used), Year of construction: 2009, Elea Cell-Cracker with 30 KV solid state pulse modulator. Capacity is 1800 liter per hour for microbial inactivation. It is better than pasteurization as there is no heat treatment...does not degrade the taste and much cheaper to operate. It can be used for all sort of liquids that require heat treatment. The system is plug and play. Easy to install and easy to operate. It was used by Orchard House in the UK. The machine is in good working condition. It was removed from operation due to the bankruptcy of the company. It can come with a spare pulse modulator. This module alone worth over 20.000 euros. Hfsdpfx Aasnl Et Njbon

Condition: used, Year of construction: 2017, Overview The ALWID-SUPERIOR-16D/4SK filling machine was built in 2017 by the German manufacturer ALWID. The machine was used by a Company producing sauces in Germany. After bankruptcy, BEVMAQ took over the machine and stored it. The filler is a piston filler that can fill volumes of 0.1-1.0 l into containers made of plastic or glass. The volume to be filled can be easily adjusted. The cap is pressed on. An extension to a screw capper is possible. In addition to sauces, the machine can also be used for dressing, spirits or mayonnaise. The below-surface filling can also be used to fill products that tend to foam. Technical Details Capacity: 6,000 bottles per hour with 250ml bottle volume A test showed that mayonnaise can still be filled to 500ml at 6,000 bottles per hour Working Direction: Left - Right Number of filling stations: 16 Number of closing elements: 4 Siemens control Below surface filling Lowering and raising the filling pipe during the filling process Scope of delivery: Filler Capper Cap sorting unit Cap alimentation Hedowwq Sfjpfx Aabjfn

Condition: used, Stock of ceramic products from bankruptcy of importer. Originally about 3 full containers. Currently, at least 2 containers/truckload are needed. Hfedpfx Aoxa Einjabon

Year of construction: 2007, condition: like new (used), Offered from a bankruptcy is a ready-made punch Manufacturers all mecanic Model 994592 Built in 2007 Masch.Nr. 905245 The punch is still unused. pneumatic foot switch Hodpfsd En Nfjx Aabefn + 3000mm fence Art.Nr. 994895 + 2000mm stroke Art.Nr. 994894

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 844 12 64, turning diameter over cross slide: 215 mm, spindle bore: 40 mm, turning diameter: 380 mm, center height: 190 mm, center width: 1,250 mm, quill stroke: 120 mm, total length: 3,020 mm, total width: 950 mm, total height: 1,500 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 14 rpm, overall weight: 1,850 kg, quill mount: MK 3, workpiece weight (max.): 300 kg, Trade show lathe, available from stock. After Trens filed for bankruptcy, we made an effort and had TOS and later Trens lathes completely overhauled. All machines were disassembled down to the last screw. Here is a run-through of a general overhaul at our company: 1. Machine cleaning, disassembly of the individual machine components 2. Grinding: bed, slide, cross support, spindle, tailstock quill 3. Grinding + scraping of the upper support guideways, replacement: trapezoidal screw with nut and V-ledge 4. Scraping of the guide surfaces: spindle, slide, cross support, and tailstock to geometric positions according to the accuracy report 5. Replacement: screw with nut, V-ledge, and Multifix base body for the cross support (including 2 turning tool cartridges) 6. Complete disassembly and replacement of the necessary spare parts in the lock case, threaded housing, headstock, gear box, tailstock, cross support, and upper support 7. Installation, replacement if necessary, of racks, repair of the lead screw and feed screw Hedpfx Aajv Hzqxsbofn 8. Complete bearing replacement in all machine assemblies 9. Complete replacement of machine plates 10. Priming of the machine, sealing, sanding, polyurethane topcoat, and painting of the machine accessories - white RAL 9003, anthracite RAL 7016 11. New control cabinet with electrical components, replacement: main motor, rapid traverse motor, hydraulic pump, cabling, and LED lighting of the work area 12. Preparation of the accuracy report and the electrical test report 13. Inspection and machine acceptance at the factory All refurbished machines have a CE certificate and a 12-month warranty. CE version: - Chuck guard with limit switch - Front chip guard mounted on slide - Rear chip guard - Lead screw and feed screw covers - Brakes after emergency stop within 2 seconds Special accessories (used): - Three-jaw lathe chuck Ø 190 mm - Four-jaw lathe chuck Ø 190 mm - Three-jaw lathe chuck Ø 240 mm - Four-jaw faceplate Ø 320 mm - Support center for bed slide - Various chuck jaws (10 pieces) - Collet set Ø 2 - 25 mm with collet chuck + drawbar - Special collet set (10 pieces) with collet chuck - 4-way tool holder

Year of construction: 2012, condition: good (used), Offered from a bankruptcy is a ready extraction and filter unit by ULT Model ACD VF 1000 Year 2012 230 Volt Hsdpoducl Nefx Aabofn Suction connection 150 mm Extraction unit 200 mm Dimensions in mm approx. 1250 x 680 x 800 Weight 125kg Nominal power 1000 m³/h The Absauganalge is suitable for vacuuming and filtering of vapours and odours. Chemical gases and vapors dry, non-explosive She can be used with folding arms directly as machine extraction and extraction.

Condition: used, A bankruptcy becomes a burner package from Dinse. The package was only used for testing purposes, only slight signs of use on power and gas nozzle. Dinse MPW with handpiece DIX 6-2-230 WS 45 Hsdsb Rbvijpfx Aabofn Hose MPW 2-300-8-3A with integrated wire feeder in the gun wire sizes from 0,9-1,2mm possible gas cooled length approx. 5meter Euro central connection Load 300Ampere at 60% ED