Condition: excellent (used), CC 100 controller for Engel injection moulding machines Crobuefnqbyo E H Apob

Condition: used, Year of construction: 1998, Spritzgießmaschine, Fabr. Stork, Typ SX-N 6600-5600, Bj 1998, SN X66503, Schließkraft 6.600 kN, Holmabstand horizontal/vertikal 900/900 mm, Aufspannplatte horizontal/vertikal 1.350/4.440 mm, Formeinbauhöhe max./min. 900/300 mm, Formöffnungsweg 940 mm, Werkzeuggesamtgewicht max. 8.600 kg, Zentrierung DS/AS 200/125 mm, Traversengewinde M20, Spritzdruck 21.000 N/cm², Spritzvolumen 2.494 cm³, Schnecken-Ø 84 mm, Kaskade 4-fach, Kernzüge FAP/BAP 2/1, Heizkreise Ma/PSG 8/0, Anschlussleistung 330 kW, Maschinengewicht 34.300 kg, Steuerung, Fabr. Stork, Type CDS500, Linear-Entnahmeroboter, Fabr. Engel, Type ERC 84/1-E, Bj. 2003, SN 97607 Cjbeuw Uqdsu E H Aperb

Condition: excellent (used), Year of construction: 2004, Battenfeld HM 2700 / 1330 injection molding machine Year of production - 2004 Control - Unilog B4 Closing system : Closing force : 2.700 kN Mold platen size (h x v): 1030 mm x 1020 mm Distance between columns (h x v): 710 mm x 630 mm Mould opening stroke: 800 mm Min. mold height: 350 mm Maximum mold height: --- mm Max. daylight: 1150 mm Hydraulic ejector - stroke: 200 mm Ejector force forward/backward: 59 kN Injection system : Screw diameter: 55 mm Ls/D ratio: 22 Injection pressure: 2041 bar Sweep volume: 653 ccm Injection weight, PS: 594 g Injection stroke: 400 mm Screw speed: 318 1/min Maximum plasticization rate: 59.3 g/sec. Cjbu E H Ajvt Rutoperb Nozzle pressure: 100 kN Electrical and hydraulic equipment Installed heating power: 18.2 kW Adjustable drum heating zones: 1+4 Oil tank capacity - 650 l Dimensions and weight Total machine weight: 12,000 kg Dimensions (L x W x H) 5.6 x 1.8 x 2.2 m

Condition: good (used), Year of construction: 1998, Clamping force: 800 kN, Screw diameter: 40 mm, Stroke volume: 204 cm³, Injection volume: 131 cm³/s, Screw speed: 310 1/min, Plasticizing capacity max.29 g/s, Nozzle pressure: 84 kN, Nominal power of pump motor: 15 kW, Installed heating power: 12 kW, Adjustable barrel heating zones: 5, Drying cycle rate: 2000 1/h, Tank capacity: 270 ltr, Machine dimensions approx.: 4.10 m x 1.40 m x 2.02 m, Total weight of machine: 3500 kg, Weight of mold: 860 kg Crjbouc Szzsu E H Apjb

Year of construction: 2002, Condition: ready for operation (used), Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available. Cobujuiykdj E H Aporb

Year of construction: 2005, Condition: excellent (used), Manufacturer: BATTENFELD Type: HM 1300-9200H-7700H-BM Control system: UNILOG B4 Clamping force: 13000 kN Year of manufacture: 2005 Technical data closing side: Drive type: full hydraulic Closing type: full hydraulic Type of construction: four-bar Closing force: 13000 kN beam dimension h: 1600 mm tie bar dimension v: 1250 mm platen size h: 2220 mm plate size v: 1880 mm Installation height min: 1000 mm Installation height max: 1800 mm distance between plates max: 3850 mm opening stroke: 2850 mm ejector stroke: 350 mm Ejector force: 165 kN centering moving platen D: 315 mm centering fixed platen D: 315 mm Technical data injection side: Screw diameter: 120 mm Stroke volume: 5655 ccm injection pressure: 1630 bar Screw length: 22 l/d Plasticizing flow: 144 g/s PS The technical data of the 2nd injection unit are as follows: Injection unit II 7700 Screw diameter 100 mm, specific injection pressure 1960 bar, calculated stroke volume 3927 ccm, screw L/D 22, plasticizing flow 122 g/sec Dimensions & Weight: Machine dimensions L x W x H: ca. 12,5 m x 3 m x 2,5 m Total weight: 113500KG Equipment: On-screen text German Crebu E H Ajgyk Nhopeb CEE socket 32A Core pull hydraulic 1x Core pull hydraulic 2 x Air valve 1x Machine with water battery Machine without material hopper Leveling elements Interface EUROMAP 63 Interface EUROMAP 67 Interface for Airmould Schuko socket 16A Two-component injection molding machine Machine is offered without peripherals.

Condition: used, Year of construction: 2002, Spritzgießmaschine, Fabr. Engel, Typ Duo 7050/1000, Bj 2002, SN 46387, Schließkraft 10.000 kN, Holmabstand horizontal/vertikal 1.400/1.150 mm, Aufspannplatte horizontal/vertikal 2.000/1.830 mm, Formeinbauhöhe max./min. 1,200/400 mm, Formöffnungsweg 1,800 mm, Werkzeuggesamtgewicht max. 18.000 kg, Zentrierung DS/AS 250/250 mm, Traversengewinde M24, Spritzdruck 16.500 N/cm², Spritzvolumen 4.160 cm³, Schnecken-Ø 120 mm, Kaskade 12-fach, Kernzüge FAP/BAP 0/2, Heizkreise Na/PSG 16/60, Anschlussleistung 340 kW, Maschinengewicht 65.000 kg, abgel. Betriebsstd. 04.101, Linear-Entnahmeroboter, Fabr. Engel, Type ERC A4/XXX, Bj. 2002, SN 11245, Schutzumhausung, integr. Werkzeugkühlsystem, Fabr. Oni, Type Rhytemper Crebu Eeuxcd Is H Apjb

Year of construction: 2002, Condition: ready for operation (used), Clamping force: 1000kN, screw diameter: 30mm, platen dimensions X/Y: 570mm/570mm, opening stroke: 500mm, min./max. mold height: 250mm/750mm, injection weight: 121g/hp, injection volume: 106cm³, operating hours: 75320h. Cjbu Ejtynkve H Aporb

Condition: new, Rexroth double pump for Battenfeld injection moulding machine Crobu E Hjfnqcgs Apob R900737658 SYDFE1-20/100R R900737659 SYDFE1-20/071R

Year of construction: 2003, Condition: ready for operation (used), There are five injection moulding machines Arburg available. 1) Arburg 320C 600-250, year of construction: 2001, operating hours: 83,365h. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90,769h. 3) Arburg 270C 300-100, year of construction: 1999, operating hours: 78,784h. 4) Arburg 320C 300-100, year of construction: 2000, operating hours: 78,784h. 5) Arburg 270C 300-100, year of construction: 2007, operating hours: 59,885h. Crjbu Ejtyyn Ho H Apeb

Year of construction: 2001, Condition: ready for operation (used), Clamping unit: approx. 26000kg, injection unit: approx. 15000kg, max. total weight of the mold: 11400kg. Hydraulic oil: (2010dm³) approx. 1800kg. Dimensions X/Y/Z: approx. 10000mm/2650mm/2450mm. Csbsr A Eiieu E H Aporb

Condition: ready for operation (used), Year of construction: 2003, max. clamping force: 700kN, screw diameter: 20/25/30mm, max. screw stroke: 100mm, max. screw peripheral speed: 30/37/45 m/min, max. screw torque: 240/300/350 Nm. Dimensions X/Y/Z: 3300mm/1455mm/1990mm, weight: approx. 2100kg. Crebsr Dd Iasu E H Apjb

Year of construction: 1998, Condition: ready for operation (used), Five identical Arburg injection molding machines are available. Clamping force: 800kN, column distance: 420mm/420mm, installation height: 250mm, platen distance: 700mm, nozzle diameter: 45mm, weight: approx. 3800kg, control: Selogica 3.020. All machines include temperature control unit and conveyor belt. Documentation available. The machines are in storage. On-site inspection is possible. Cjbusviv Dfo E H Apjrb

Year of construction: 2012, Condition: ready for operation (used), Installation height min./max.: 200mm/595mm, opening stroke: 200mm, closing force: 600kN, screw diameter: 25mm, distance between tie bars: 370mm, max. injection volume: 49cm³, operating hours: 55682h. Documentation available. On-site inspection is possible. Cjbu Eet E Tq Re H Aperb

Year of construction: 2022, Condition: ready for operation (used), A new injection molding machine including robot is available. 1) Krauss Maffei injection molding machine, year of manufacture: 2022, clamping system: hydromechanical clamping system with 2 platens. Plasticizing: 8100, screw diameter: 105mm, nozzle radius: 35mm, nozzle bore: 6mm, clamping force: 1700t, control: MC6. 2) Industrial robot Kuka IR 1200 R3100.2 F/K, max. payload: 120kg, reach: 3100mm, repeatability: +/-0.05mm, control: KR C5. Documentation available. On-site inspection is possible. Crebuovpvlcj E H Apjb

Year of construction: 1997, Condition: ready for operation (used), Operating pressure: 210bar, injection force: 693kN, clamping force: 3500kN, opening stroke: 700mm, mold installation height: 600mm-950mm, power: 118kW, operating hours: 176,533h, cycles: 1,569,030. documentation available. On-site inspection is possible. Cobu Eouku Sgj H Aporb

Year of construction: 2005, Condition: ready for operation (used), Clamping force: 550kN, screw diameter: 38mm, stroke volume: 196cm³, injection pressure: 2000bar, platen dimensions: 565mm/540mm, tie bar distance: 360mm/335mm. Workpiece height min./max.: 250mm/650mm, opening stroke: 400mm, max. platen distance: 1050mm, ejector stroke: 80mm, max. mold weight: 600kg. Dimensions X/Y/Z: approx. 3300mm/1200mm/2100mm, weight: approx. 2300kg, operating hours: 29664h, control: Procan MD. Robot interface Euromap 12 included. Cebuotyaypj E H Aperb

Year of construction: 1998, Condition: ready for operation (used), Clamping force: 1000kN, tie bar distance: 420mm/420mm, min. installation height: 250mm, max. opening stroke: 750mm, screw diameter: 40mm, injection volume: 226.5cm³, injection weight PE/PS: 206g/161g, injection pressure: 2164bar. Dimensions X/Y/Z: approx. 4500mm/1500mm/2000mm, weight: approx. 4700kg, control: Unilog 4000B, operating hours: 99295h. Including Euro package, ejector plate safety device, AK+ screw cylinder and storage cassette with 21 slots. Documentation available. On-site inspection is possible. Crjbust N T E Ae E H Apsb

Year of construction: 2001, Condition: ready for operation (used), Screw diameter: 30mm, connected load: 42kW, operational hours counter pump/ automatic: 73,384/ 64,491h, with control software version 3.080, an on-site inspection is possible. Cebu Esrcmx He H Apsrb

Year of construction: 1998, Condition: ready for operation (used), Clamping force: 500kN, screw diameter: 30mm, injection volume: 101cm³, injection weight: 92g, injection pressure: 1488bar, clamping plate dimensions X/Y: 540mm/540mm, distance between tie bars: 321mm, mold opening: 350mm, mold height min./max.: 200mm/550mm, weight: approx. 2300kg. Including 1 hydraulic core puller. Cebu E Hstw Duro Aporb

Year of construction: 2013, Condition: ready for operation (used), Clamping force: 250kN, distance between tie bars: 270mm/270mm, platen dimensions X/Y: 380mm/380mm, screw diameter: 25mm, injection volume: 49cm³, injection weight (PS): 45g, injection pressure: 2000bar, cores: 2+5, heating zones: 12, pump hours: 2388h, automatic operation: 1600h. Including Multilift H with B-axis, clean room module. Crebu E Hjtyax Es Apeb

Year of construction: 2013, Condition: ready for operation (used), Installation height min./max.: 250mm/750mm, opening stroke: 500mm, clamping force: 1000kN, screw diameter: 35mm, distance between tie bars: 420mm, max. injection volume: 144cm³, operating hours: 54164h. Documentation available. On-site inspection is possible. Cjbet E Trbju E H Apsrb

Year of construction: 2005, Condition: ready for operation (used), Flange diameter: 160mm, clamping force: 1600kN, tie bar distance: 520mm/520mm, min. mold diameter: 350mm, min. mold installation height: 300mm, opening stroke: 650mm, platen distance: 950mm, ejector stroke: 150mm. Screw diameter: 45mm, injection pressure: 2336bar, stroke volume: 318cm³, nozzle radius: 15mm, injection volume: 134cm³, injection weight: 289g. Machine dimensions X/Y/Z: approx. 4900mm/1600mm/2200mm, weight: approx. 7400kg, operating hours: approx. 71187h. The machine has an unknown defect. Documentation available. An on-site inspection is possible. Cjbuouabq Tj E H Apsrb

Year of construction: 1999, Condition: ready for operation (used), Clamping force: 2000kN, tie bar distance: 520mm/520mm, platen size: 715mm/715mm, min. installation height: 250mm, max. platen distance: 900mm, max. opening stroke: 650mm, max. ejector stroke: 225mm, max. ejector force: 66kN. Screw diameter: 45mm, injection weight: 240g, injection pressure: 250bar, stroke volume: 254cm³. Machine dimensions X/Y/Z: approx. 6500mm/1700mm/2200mm, weight: approx. 6700kg, control: Selogica 3.090, operating hours: over 100,000h. On-site inspection is possible. Csbuevnd Txe E H Apjrb

Year of construction: 2003, Condition: ready for operation (used), Clamping force: 13000kN, tie bar distance X/Y: 1600mm/1250mm, installation height min./max.: 650mm/1400mm, opening stroke: 1680mm, screw diameter: 100mm, stroke volume: 3900cm³, control: Unilog B4, operating hours: 44450h. Including linear robot Bettenfeld R15, Euromap, Europaket, various interfaces, various Mouldmaster and core pulls. 1x core pull valve and flat surface nozzle defective. Documentation available. Cobu E H Aet Eu Dlsporb