Condition: new, Year of construction: 2023, Functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 10,00,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113 Dslinm Soud N Hdslocg  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC)  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: refurbished (used), operating hours: 22,000 h, In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. This machine has a 30mm plasticising unit which gives a maximum shot weight of 89 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Machine is now available for a full demonstration as and when required. Dcolinsl Tnz Eem Slsg Refurbished machines undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free with a 3 month (parts only) warranty. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we'll do the rest.

Condition: good (used), Year of construction: 2014, operating hours: 20,209 h, Functionality: fully functional, clamping force: 2,000 kN, Machine with exemplary maintenance and servicing TECHNICAL DETAILS Clamping force: 2000 kN Cylinder size AG1: 20 mm Cylinder size AG2: 16 mm Machine drive power: 45 kW Flow Box DETAILS Type: LMP 105 Manufacturer: Max Petek Serial number: S 140743 Year of manufacture: 2014 Robot DETAILS Robot: Krauss - Maffei MH 50 Designation 6 -axis: Yaskawa Type: DX 100 Operating hours: approx. 8900 h Year of construction: 2014 Delinm Ssuh Tkzslscg MACHINE DETAILS Weight: 13,300 kg Length: 6,901 mm Width: 2,075 mm Height: 2,240 mm + 800 mm flow box

Condition: good (used), Year of construction: 2007, operating hours: 47,963 h, Functionality: fully functional, clamping force: 2 kN, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Clamping force: 200 t Number of aggregates: 2 Djlsuzg Sbjinm Sljcg MACHINE DETAILS Dimensions: 5,200 x 2,200 x 2,700 mm Weight: 11,500 kg Operating hours: 47,963 h

Condition: ready for operation (used), Year of construction: 1997, Functionality: fully functional, clamping force: 6,500 kN, screw diameter: 130 mm, displacement volume: 6,172 cm³, injection pressure: 1.296 bar, plate width: 1,700 mm, plate height: 1,704 mm, TECHNICAL DETAILS Clamping force: 6,500 kN Dolovn Ny Djinm Sljcg Tool opening force, max.: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Clamping plate (h x v): 1,704 x 1,700 mm Clear width (h x v): 930 x 930 mm Tool opening stroke: 1,150 mm Tool installation height, min.: 600 mm Opening width: 1,750 mm Ejector stroke: 250 mm Ejector force forward/backward: 226 kN Injection unit Screw diameter: 130 mm L/D ratio: 20 Injection pressure: 1,296 bar Displacement: 6,172 cc Shot weight (PS): 5,617 g Injection flow: 1,540 cc/s Screw speed: 138 rpm Plasticizing flow: 238 g/s Nozzle contact force: 246 kN Electrohydraulic equipment Nominal pump motor power: 132 kW Installed heating power: 70 kW Cylinder heating control zones: 7 MACHINE DETAILS Space requirement approx.: 12.00 x 2.80 x 2.70 m Total weight: 43,000 kg EQUIPMENT - Oscillating elements - 1 x air valve - 2 x hydraulic core pull on BFAP - 2 x hydraulic core pull on FFAP - 8 x hot runner control points - Robot interface according to Euromap 67

Condition: used, Year of construction: 1998, Technical details: closing pressure: 3500 kN Doljvta Ngsinm Slocg weight of the machine ca.: 25,5 t

Condition: new, Year of construction: 2023, Functionality: fully functional, machine/vehicle number: 61036946, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 6,00,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (order 38670023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22 Djlieud H Dmsnm Sljcg  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 40 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1860  Stroke volume cm³ 201  Shot weight at max. stroke for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticizing flow (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heat output kW 11.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: excellent (used), Year of construction: 2016, clamping force: 4,500 kN, screw diameter: 70 mm, displacement volume: 1,239 cm³, injection weight: 1,127 g, ejector force: 110 N, opening stroke: 1,400 mm, plate length: 1,090 mm, plate width: 1,180 mm, installation height: 850 mm, overall weight: 20,000 kg, heating capacity: 36.4 kW (49.49 HP), pressure: 199 bar, Core pulls 4 Dcslinmju Tdx Hj Slog Sepro extraction unit SR Axels 20 S3 Year of construction 2006

Condition: excellent (used), Year of construction: 2012, clamping force: 800 kN, Very good condition - 3K machine - shot 1 first- shot 2 from screw 2 in same inlet point as Dolsvk Uhxoinm Slecg shot 1 - shot 3 as a normally 2K principle Extremely well maintained from big Danish manufacturer - more machines are available

Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, clamping force: 400 kN, screw diameter: 30 mm, injection pressure: 1.45 bar, injection weight: 88 g, total length: 3,510 mm, total width: 1,220 mm, total height: 1,900 mm, overall weight: 3,000 kg, heating capacity: 6.9 kW (9.38 HP), power: 21.9 kW (29.78 HP), Engel 200/40 injection molding machine Technical data: Screw diameter 30mm Injection weight 88g Injection pressure 1450bar Dosing volume 99ccm Clamping force 40t Size of the clamping plates 550x430mm CC90 control system (Norwegian language) Weight 3000kg Dimensions 3.51x1.22x1.90m Heating capacity 6.9 kW Total output 21.9kW Location: Austraße 34 Dcolinmeryxl To Slsg 57076 Siegen

Condition: excellent (used), Year of construction: 2016, operating hours: 18,667 h, clamping force: 420 kN, Year: 2016 Type of control: NC5 Number of hours: 18,697 H Storage location: MECA PLASTIC Deadline: AVAILABLE Closing force: 420 T Opening stroke: 770 mm Between columns: 820 x 820 mm Plate dimensions: 1200 x 1200 mm Mold min/max: 350/1020 mm Max gap between plates: 1790 mm Screw diameter: 60 mm Screw length: 25D cm3: 763 Bars: 2106 Motor power: 135 kw Heating power: 27.9 kw Closing weight: Injection weight: 24 tonnes Length dimensions: 8 m Width dimensions: 2.2 m Dcslinm Sjvtnc Uoleg Dimensions height: 2.70 m Cores: Robot interface: YES Bi-metal: YES Others: 8 BLOW GUNS, 3 batteries on injection, 16 hot runners, pneumatic shutter nozzle, 3 programmable inputs, mixer/mixer tip screw

Year of construction: 2015, Condition: not inspected (used), Injection molding machine 320 C 500-100 Manufacturer: Arburg serial number 232824 Dcelinmsi Ewt Us Sljg Footprint: 3,2m x 1,5m

Year of construction: 2007, Condition: excellent (used), Manufacturer: Krauss Maffei Type: KM 650-3500-700 CZ Year of manufacture: 2007 Control unit: MC 4 Clamping unit: Clamping force: 650 t opening stroke: 1150 mm Mold installation height min. : 600 mm platen distance max. : 1750 mm tie bar distance (h x v): 1100 x 900 mm platen dimensions (h x v): 1510 x 1370 mm centering (nozzle- ejector plate): 200 / 200 mm 1.injection unit screw diameter : 80 mm Injection weight in PS. Max. : 1400 g Haulqtz Stroke volume: 1543 ccm Injection pressure : 2205 bar 2nd injection unit Screw diameter: 45 mm Injection weight in PS: 278 g Stroke volume: 305 ccm Injection pressure: 2.336 bar Accessories: 2 x air valve 16 -times cascade 3 x core pull on BWAP 3 x core pull at FWAP 20 x hot runner control stations Robot interface: Euromap 67 Dimensions: Total weight: 34,500 kg Total size L x W x H: 7.8 x 2.5 x 2.5 m Operating hours: 45400 h Djliskw T A Uonm Slocg Machine can also be used as a 1 K machine.

Condition: good (used), Year of construction: 2005, 1x used Arburg 420C 1000-250 Year of construction: 02/2005 Ma-No. 196692 Auger 30mm Installation height extended to 350mm Blow out: 1x Core pull: 1x Handling interface Master computer interface Printer interface Dcjlinmsuzwpqj Slsg Interface inking device The machine is sold without any other visible peripherals / tools!

Condition: excellent (used), Year of construction: 2008, clamping force: 400 kN, screw diameter: 30 mm, Very good conditions, extremely maintained from big Danish manufacturer Dcelinm Ssvk T Svoleg 4 pcs available - feel free to ask for more information

Condition: used, Year of construction: 1989, operating hours: 74,900 h, clamping force: 850 kN, screw diameter: 40 mm, overall weight: 3,700 kg, Machine no. 145464 Year of construction 1989 Machine weight 3700 kg (without oil filling) Clamping force 850kN Heating 8,31KW Motor 18,5KW Dcolor Hrqrjinm Sleg Total power 27,2KW Machine cycles 7,112,306 Operating hours 74,900h Interfaces: Master computer, handling, blow-out, selector switch, core pull 1 hydraulic, mold temperature control 3 pcs. The following accessories etc. are included with the machine: Complete 50 injection unit thermoplastic , Selecting diverter , Hydraulic infeed conveyor (height adjustable 3 levels) (integrated in control) , Diskette drive external (Arburg original) , Documentation and work reports from the machine by Arburg Service , Machine setting course CMD documents (folder) , E-plan , Documents also in digital form , Oil filling (must be pumped into a container before transport (pump is available)) , Electronic water battery

Condition: excellent (used), Year of construction: 2018, operating hours: 17,000 h, clamping force: 220 kN, screw diameter: 50 mm, Year: 2018 Type of control: CC300 Number of hours: 17,000H Storage location: MECA PLASTIC Deadline: AVAILABLE Closing force: 220 T Opening stroke: 530 mm Between columns: 620 mm x620 mm Plate dimensions: 900mm x900 mm Mini/max mold: 250/600 mm Max gap between plates: 1220 mm Screw diameter: 50mm Screw length: 20D cm3: 432 Bars: 2002 Motor power: 29kw Djlinsvtm Uiom Slscg Heating power: 15.3kw Closing weight: 11.3T Length dimensions: 6.30m Width dimensions: 1.80 m Height dimensions: 2.10 m Cores: NO Robot interface: YES Bimetal: YES

Condition: excellent (used), Year of construction: 2003, operating hours: 54,000 h, Functionality: fully functional, machine/vehicle number: 75-268, clamping force: 270 kN, screw diameter: 52 mm, clearance between the columns: 630 mm, displacement volume: 580 cm³, injection pressure: 2.2 bar, injection weight: 580 g, mold height (min.): 250 mm, plate width: 940 mm, plate height: 880 mm, total length: 6,000 mm, total width: 2,000 mm, total height: 3,500 mm, overall weight: 10,000 kg, connection type: Euromap, The machine has been fully operationnal until last month, the machine is including a Dal Maschio Robot from 2013 : DMG Type 3 ; DMGP4999 Dcjlineq Nn Itjm Slsg

Condition: good (used), Year of construction: 2001, Functionality: fully functional, clamping force: 2,700 kN, screw diameter: 55 mm, injection pressure: 1.943 bar, overall weight: 12,400 kg, pressure: 1.943 bar, TECHNICAL DETAILS Closing side Drive type: fully hydraulic Closing type: fully hydraulic Construction: four-bar Closing force: 2,700 kN Panel size (h x v): 900 mm x 1,000 mm Beam dimensions (h x v): 630 mm x 630 mm Installation height: 250 mm / 620 mm Opening travel: 550 mm Panel distance: 1,270 mm Ejector stroke: 160 mm Ejector force: 67 Nm Centering D movable plate: 160 mm Centering D fixed platen: 160 mm Threaded hole for clamping plates: M20 Dimensions (LxWxH): 6,400 mm x 2,010 mm x 2,300 mm Djliou R Nagenm Slscg Total weight: 12,400 kg Injection side Screw diameter: 55 mm Stroke volume: 522 cm³ Injection pressure: 1,943 bar L/D ratio: 20 Screw stroke: 220 mm Screw speed: 285 1/min Screw torque: 1,620 Nm Plasticizing flow: 49 g/s PS Injection flow into the atmosphere: 262 cm³/s Number of heating zones: 4 Nozzle delivery force: 106 kN Pump drive power: 45 kW Voltage: 400 V / 50 Hz Oil tank capacity: 630 l EQUIPMENT On-screen text in German CEE socket 16A Hydraulic core pull 4x Machine without material hopper Leveling elements Interface for material conveyor Schuko socket 16A Two-component injection molding machine

Condition: good (used), Year of construction: 2003, Functionality: fully functional, clamping force: 10,000 kN, screw diameter: 120 mm, injection pressure: 1.632 bar, overall weight: 76,500 kg, TECHNICAL DETAILS Closing side Drive type: fully hydraulic Closing type: Fully hydraulic Construction: four-bar Closing force: 10,000 kN Panel size (h x v): 1,960 mm x 1,690 mm Beam dimensions (h x v): 1,120 mm x 1,400 mm Installation height: 550 mm / 1,020 mm Opening travel: 1,000 mm Dcolinmeu R Nttj Sleg Panel spacing: 2,120 mm Ejector stroke: 300 mm Ejector force: 118 kN Centering D movable plate: 250 mm Centering D fixed platen: 315 mm Threaded hole for clamping plates: M24 Dimensions (LxWxH): 11.60 m x 2.90 m x 2.50 m Total weight: 76,500 kg Injection side Screw diameter: 120 mm Stroke volume: 5,655 cm³ Injection pressure: 1,632 bar L/D ratio: 22 Screw geometry: 9 L/D Screw stroke: 500 mm Screw speed: 130 1/min Plasticizing flow: 144 g/s PS Injection flow into the atmosphere: 1,144 cm³/s Number of heating zones: 8 Nozzle delivery force: 226 Pump drive power: 110 kW Heating power: 81 kW Oil tank capacity: 1,520 l EQUIPMENT On-screen text in German Compact flash drive Hydraulic core pull 4x Leveling elements EUROMAP 12 interface Interface for temperature control unit Enlarged oil cooler mold heating 16x

Condition: ready for operation (used), Year of construction: 2004, PET preform injection molding machine clamping force 320t injection weight 6935gr. screw 130mm preform removal system SERVO IV, TPS robot TRT-M4-72-E, 72-fold, 4-stage, incl. removal set, conveyor belt LT/h 1825 Output approx. 17,000 preforms/hour Option1: MHT mold 72-cavity for 30.8 gr. PCO 1810 or 1881 (shorty, 28mm neck ring, 1.5 liter bottles) Option2: 72 core sets for 27.8 gr. PCO 1810 or 1881 (shorty, 28mm neck ring, 1.0 liter bottles) Djlsnxkxwsinm Slocg Line comes from our own preform production and was in production until our new line was replaced.

Condition: excellent (used), Year of construction: 2018, operating hours: 9,585 h, Functionality: fully functional, clamping force: 1,600 kN, screw diameter: 55 mm, injection pressure: 1.904 bar, overall weight: 10,900 kg, pressure: 1.904 bar, TECHNICAL DETAILS Operating hours Operating hours: 9,585 h Closing side Drive type: Hybrid Closing type: Toggle lever Construction: four-bar Closing force: 1,600 kN Panel size (h x v): 710 mm x 660 mm Rail dimensions (h x v): 520 mm x 470 mm Installation height: 200 mm / 600 mm Opening stroke: 1,050 mm Ejector stroke: 150 mm Ejector force: 33 Nm Centering D movable plate: 120 mm Centering D fixed plate: 120 mm Dimensions (LxWxH): 6,700 mm x 1,600 mm x 2,300 mm Total weight: 10,900 kg Dcelinju R I N Tsm Slog Injection side Screw diameter: 55 mm Stroke volume: 523 cm³ Injection pressure: 1,904 bar L/D ratio: 18 Screw geometry: 9 Screw speed: 243 1/min Screw torque: 827 Nm Plasticizing system: 43 g/s PS Injection flow into the atmosphere: 297 cm³/s Number of heating zones: 6 Nozzle delivery force: 50 kN Voltage: 400 V / 50 Hz EQUIPMENT On-screen text in German CEE socket outlet 16A CEE socket 32A Pressure accumulator for increased injection capacity 3 freely programmable inputs and outputs each Core pull pneumatic 2x Machine with water battery Machine without material hopper Leveling elements Interface for deaerator Interface for temperature control unit USB interface Schuko socket 10A Low-wear plasticizing unit mold heating 24x

Condition: excellent (used), Year of construction: 2013, clamping force: 220 kN, screw diameter: 55 mm, Year: 2013 Type of control: CC300 Number of hours: 35000H Storage location: MECA PLASTIC Deadline: AVAILABLE Closing force: 220 T Opening stroke: 600 mm Between columns: 650 mm x 650mm Plate dimensions: 970 mm x 970 mm Mold min/max: 250/600 mm Max gap between plates: 1200 mm Screw diameter: 55mm Screw length: 20D cm3: 677 Bars: 2003 Motor power: 81kw Heating power: 19.8kw Closing weight: 16T Length dimensions: 7.10 m Width dimensions: 2 m Height dimensions: 2.50 m Cores: NO Robot interface: YES Bimetal: YES Dcolinevtm Ipsm Sleg

Condition: excellent (used), Year of construction: 2011, operating hours: 37,500 h, Functionality: fully functional, machine/vehicle number: 181517, clamping force: 4,000 kN, screw diameter: 60 mm, injection weight: 700 g, Injection machine 2K 60 mm - 35 mm, in very good condition with few hours of work. Machine in operation in Sabadell. Machine equipped with a Wittmann robot of 2014. With safety grid and 2 belts. Delinjvgq Hpjm Slecg

Condition: excellent (used), Year of construction: 2017, operating hours: 25,000 h, clamping force: 110 kN, screw diameter: 35 mm, clearance between the columns: 5,10,460 mm, mold height (min.): 1,50,450 mm, pressure: 2,400 bar, power: 6.6 kW (8.97 HP), Year: 2017 Type of control: CC300 Number of hours: 25,000H Storage location: MECA PLASTIC Deadline: AVAILABLE Screw diameter: 35mm Screw length: 20D cm3: 168 Bars: 2400 Closing force: 110 T Opening stroke: 400mm Between columns: 510mm x 460mm Plate dimensions: 730mm x 680mm Mini/max mold: 150/450mm Max gap between plates: 850 mm Dcolinmsvrdtto Slsg Motor power: 6.6 kw Heating power: 4kw Closing weight: 6.6T Length dimensions: 5.10 m Width dimensions: 1.60m Height dimensions: 2.20m Cores: NO Robot interface: YES Bimetal: YES